[parisc-linux] 2.6.5-pa7 failled to build?

[Joel Soete]

Fortunately build and boot fine on 64bits n4k system (build with gcc-hppa64-3.0)
btw the 32bit one was build with gcc-3.3.3: is there known issue?

Tx,
	Joel

Joel Soete wrote:
> Hi all,
> 
> I just try to recompile 2.6.5-pa7 32bit on my b2k and it failled with following
> ld message:
> [snip]
>   gcc -Wp,-MD,drivers/usb/host/.ohci-hcd.o.d -nostdinc -iwithprefix include
> -D__KERNEL__ -Iinclude  -D__KERNEL__ -Iinclude  -Wall -Wstrict-prototypes
> -Wno-trigraphs -fno-strict-aliasing -fno-common -pipe -mno-space-regs -mfast-indirect-calls
> -mdisable-fpregs -ffunction-sections -march=2.0 -mschedule=8000 -O2 -fomit-frame-pointer
>     -DKBUILD_BASENAME=ohci_hcd -DKBUILD_MODNAME=ohci_hcd -c -o drivers/usb/host/ohci-hcd.o
> drivers/usb/host/ohci-hcd.c
> In file included from drivers/usb/host/ohci-hcd.c:135:
> drivers/usb/host/ohci-dbg.c: In function `ohci_dump_td':
> drivers/usb/host/ohci-dbg.c:282: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:284: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:309: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:310: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:320: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:320: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:324: warning: passing arg 1 of `__swab16p' discards
> qualifiers from pointer target type
> In file included from drivers/usb/host/ohci-hcd.c:135:
> drivers/usb/host/ohci-dbg.c: In function `ohci_dump_ed':
> drivers/usb/host/ohci-dbg.c:342: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:361: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
> drivers/usb/host/ohci-dbg.c:361: warning: passing arg 1 of `__swab32p' discards
> qualifiers from pointer target type
>    ld   -r -o drivers/usb/host/built-in.o drivers/usb/host/ohci-hcd.o
> make -f scripts/Makefile.build obj=drivers/usb/image
>    rm -f drivers/usb/image/built-in.o; ar rcs drivers/usb/image/built-in.o
> Inconsistency detected by ld.so: dynamic-link.h: 164: elf_get_dynamic_info:
> Assertion `info[9]->d_un.d_val == sizeof (Elf32_Rela)' failed!
> make[3]: *** [drivers/usb/image/built-in.o] Error 127
> make[2]: *** [drivers/usb/image] Error 2
> make[1]: *** [drivers/usb] Error 2
> make: *** [drivers] Error 2
> 
> This b2k is running a sid debian install with mainly:
> # dpkg -l gcc binutils libc6
> Desired=Unknown/Install/Remove/Purge/Hold
> | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
> |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
> ||/ Name                       Version                    Description
> +++-==========================-==========================-====================================================================
> ii  gcc                        3.3.3-2                    The GNU C compiler
> ii  binutils                   2.14.90.0.7-6              The GNU assembler,
> linker and binary utilities
> ii  libc6                      2.3.2.ds1-11               GNU C Library:
> Shared libraries and Timezone data
> 
> And my config file is nearly the c3k one:
> # diff -Nau .config arch/parisc/configs/c3000_defconfig 
> --- .config	2004-04-14 13:29:41.874241120 +0200
> +++ arch/parisc/configs/c3000_defconfig	2004-04-08 12:38:54.000000000 +0200
> @@ -70,14 +70,14 @@
>  CONFIG_IOSAPIC=y
>  CONFIG_IOMMU_SBA=y
>  CONFIG_SUPERIO=y
> -CONFIG_CHASSIS_LCD_LED=y
> +# CONFIG_CHASSIS_LCD_LED is not set
>  # CONFIG_PDC_CHASSIS is not set
>  
>  #
>  # PCMCIA/CardBus support
>  #
>  CONFIG_PCMCIA=m
> -# CONFIG_PCMCIA_DEBUG is not set
> +CONFIG_PCMCIA_DEBUG=y
>  CONFIG_YENTA=m
>  CONFIG_CARDBUS=y
>  # CONFIG_I82092 is not set
> @@ -520,7 +520,8 @@
>  #
>  # Ethernet (10000 Mbit)
>  #
> -# CONFIG_IXGB is not set
> +CONFIG_IXGB=y
> +CONFIG_IXGB_NAPI=y
>  # CONFIG_FDDI is not set
>  # CONFIG_HIPPI is not set
>  CONFIG_PPP=m
> 
> Any idea?
> 
> Joel
> 
> ----------------------------------------------------------------------------------------
> Tiscali ADSL: 35 €/mois, la meilleure offre du marché!
> http://reg.tiscali.be/default.asp?lg=fr
> 
> 
> 
> _______________________________________________
> parisc-linux mailing list
> parisc-linux at lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
>