[parisc-linux] Linux on HP
Damian Muchliński
mudamian@poczta.onet.pl
Fri, 14 Nov 2003 18:41:25 +0100
This is a multi-part message in MIME format.
------=_NextPart_000_0025_01C3AADE.E8216470
Content-Type: multipart/alternative;
boundary="----=_NextPart_001_0026_01C3AADE.E82471B0"
------=_NextPart_001_0026_01C3AADE.E82471B0
Content-Type: text/plain;
charset="iso-8859-2"
Content-Transfer-Encoding: quoted-printable
Hello
I'm trying to set-up linux on HP computer. First I've tried Debian =
Stable
Woody relase with 2.4.17 kernel but i got message WARNING! Stack pointer
and cr30 do not correspond! I've found on newsgroup that because of old
version of gcc and kernel and I should use newer version. So I have
downloaded palinux-2.4.22-pa13-20031022-netinst.iso from your
website,check md5, burned and booted.
Unfortunately it hangs on "searching for devices" without any more info.
I would be very gratefull if you could help me solve this problem. Maybe
somemone else had similar problem.
=20
I've attached files with bugreport.
Thanks for any suggestions, waiting for reply from you.
------=_NextPart_001_0026_01C3AADE.E82471B0
Content-Type: text/html;
charset="iso-8859-2"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-2">
<META content=3D"MSHTML 6.00.2800.1106" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman"=20
size=3D3>Hello<BR><BR>I'm trying to set-up linux on HP computer. First =
I've tried=20
Debian Stable<BR>Woody relase with 2.4.17 kernel but i got message =
WARNING!=20
Stack pointer<BR>and cr30 do not correspond! I've found on newsgroup =
that=20
because of old<BR>version of gcc and kernel and I should use newer =
version. So I=20
have<BR>downloaded palinux-2.4.22-pa13-20031022-netinst.iso from=20
your<BR>website,check md5, burned and booted.<BR>Unfortunately it hangs =
on=20
"searching for devices" without any more info.<BR>I would be very =
gratefull if=20
you could help me solve this problem. Maybe<BR>somemone else had similar =
problem.</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3> <BR><?fontfamily><?param Arial><?smaller> I've attached =
<?fontfamily><?param Arial><?smaller>files with =
bugreport.<?/smaller><?/fontfamily><BR><BR><BR>Thanks for any =
suggestions,=20
waiting for reply from you.</FONT><BR></DIV></FONT></BODY></HTML>
------=_NextPart_001_0026_01C3AADE.E82471B0--
------=_NextPart_000_0025_01C3AADE.E8216470
Content-Type: text/plain;
name="komunikat 2.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="komunikat 2.txt"
Main Menu: Enter command > bo ide =20
Interact with IPL (Y, N, Q)?> y =20
Booting... =20
Boot IO Dependent Code (IODC) revision 0 =
=20
HARD Booted. =20
palo ipl 1.0 root@palinux Mon Apr 1 10:02:53 MST 2002 =
=20
Boot image contains: =20
0/vmlinux32 3687647 bytes @ 0x608000 =
=20
0/vmlinux64 4719374 bytes @ 0x98c800 =
=20
0/ramdisk 2663046 bytes @ 0xe0d000 =
=20
Information: No console specified on kernel command line. This is =
normal. =
=20
PALO will choose the console currently used by firmware (serial).Current =
command =
=20
line: =20
0/vmlinux ramdisk_size=3D8192 root=3D/dev/ram initrd=3D0/ramdisk =
console=3DttyS0 TERM=3Dvt =
=20
102 =20
0: 0/vmlinux =20
1: ramdisk_size=3D8192 =20
2: root=3D/dev/ram =20
3: initrd=3D0/ramdisk =20
4: console=3DttyS0 =20
5: TERM=3Dvt102 =20
Edit which field? =20
(or 'b' to boot with this command line)? b =
=20
Command line for kernel: 'ramdisk_size=3D8192 root=3D/dev/ram =
console=3DttyS0 TERM=3Dvt1 =
=20
02 palo_kernel=3D0/vmlinux' =20
Selected kernel: /vmlinux from partition 0 =
=20
Selected ramdisk: /ramdisk from partition 0 =
=20
Warning: kernel name doesn't end with 32 or 64 -- Guessing... =
=20
This box can boot either 32 or 64-bit kernels...Both kernels available, =
choosing =
=20
32-bit kernelELF32 execut =20
Entry 00100000 first 00100000 n 5 =20
Segment 0 load 00100000 size 2024492 mediaptr 0x1000 =
=20
Segment 1 load 002f0000 size 299320 mediaptr 0x1f0000 =
=20
Segment 2 load 0033c000 size 401408 mediaptr 0x23a000 =
=20
Segment 3 load 003a0000 size 32768 mediaptr 0x29c000 =
=20
Segment 4 load 003c90f8 size 102032 mediaptr 0x2a40f8 =
=20
Loading ramdisk 2663046 bytes @ 3fd65000... =
=20
Branching to kernel entry point 0x00100000. If this is the last =
=20
message you see, you may need to switch your console. This is =
=20
a common symptom -- search the FAQ and mail =
=20
Linux version 2.4.17-32 (root@paer) (gcc version 3.0.4) #1 Sat Mar 16 =
17:09:00 M =
=20
ST 2002 =20
FP[0] enabled: Rev 1 Model 19 =20
The 32-bit Kernel has started... =20
Determining PDC firmware type: System Map. =
=20
model 00005dc0 00000481 00000000 00000002 77634812 100000f0 00000008 =
000000b2 00 =
=20
0000b2 =20
vers 00000203 =20
CPUID vers 19 rev 7 (0x00000267) =20
model 9000/785/C3700 =20
Total Memory: 2048 Mb =20
initrd: 4fd65000-4ffef286 =20
initrd: reserving 3fd65000-3ffef286 (mem_max 80000000) =
=20
pagetable_init =20
On node 0 totalpages: 524288 =20
zone(0): 524288 page =20
zone(1): 0 pages. =20
zone(2): 0 pages. =20
LCD display at f05d0008,f05d0000 registered =
=20
Kernel command line: ramdisk_size=3D8192 root=3D/dev/ram console=3DttyS0 =
TERM=3Dvt102 pa =
=20
lo_kernel=3D0/vmlinux =20
Console: colour dummy device 160x64 =20
Calibrating delay loop... 1497.49 BogoMIPS =
=20
Memory: 2058652k available =20
Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes) =
=20
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) =
=20
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) =
=20
Buffer-cache hash table entries: 1310 =20
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) =
=20
Searching for devices... =20
Found devices: =20
1. Astro BC Runway Port (12) at 0xfed00000 [10], versions 0x582, 0x0, =
0xb =
=20
2. Elroy PCI Bridge (13) at 0xfed30000 [10/0], versions 0x782, 0x0, 0xa =
=20
3. Elroy PCI Bridge (13) at 0xfed32000 [10/1], versions 0x782, 0x0, 0xa =
=20
4. Elroy PCI Bridge (13) at 0xfed38000 [10/4], versions 0x782, 0x0, 0xa =
=20
5. Elroy PCI Bridge (13) at 0xfed3c000 [10/6], versions 0x782, 0x0, 0xa =
=20
6. Unknown machine (0) at 0xfffa0000 [32], version =
=20
7. Memory (1) at 0xfed10200 [49], versions 0x9c, 0x0, 0x9 =
=20
CPU(s): 1 x PA8600 (PCX-W+) at 750.000000 MHz =
=20
SBA found Astro 2.1 at 0xfed00000 =20
lba version TR4.0 (0x5) found at 0xfed30000 =
=20
lba version TR4.0 (0x5) found at 0xfed32000 =
=20
lba version TR4.0 (0x5) found at 0xfed38000 =
=20
lba version TR4.0 (0x5) found at 0xfed3c000 =
=20
iosapic: hpa not registered for PCI device 103c:1008 (Hewlett-Packard =
Company) =
=20
POSIX conformance testing by UNIFIX =20
Linux NET4.0 for Linux 2.4 =20
Based upon Swansea University Computer Society NET3.039 =
=20
Initializing RT netlink socket =20
Enabled soft power switch (polling mode, io=3D0xf0400804). =
=20
SuperIO: Found NS87560 Legacy I/O device at 00:0e.1 (IRQ 64) =
=20
SuperIO: Serial port 1 at 0x3f8 =20
SuperIO: Serial port 2 at 0x2f8 =20
SuperIO: Parallel port at 0x378 =20
SuperIO: Floppy controller at 0x3f0 =20
SuperIO: ACPI at 0x7e0 =20
SuperIO: USB regulator enabled =20
parport0: PC-style at 0x378, irq 101 [PCSPP(,...)] =
=20
Starting kswapd =20
Journalled Block Device driver loaded =
=20
PCI graphic ROM found at f7000000 (2048 kB), fb @ fa000000 (32 MB) =
=20
STI word mode ROM at f7000044, hpa=3Dfa000000 =
=20
STI word mode ROM, id 35acda30-9a02587, conforms to spec rev. 8.0d =
=20
STI device: A1299B =20
pty: 256 Unix98 ptys configured =20
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ =
SERIAL_PCI en =
=20
abled =20
ttyS00 at port 0x03f8 (irq =3D 99) is a 16550A =
=20
ttyS01 at port 0x02f8 (irq =3D 100) is a 16550A =
=20
lp0: using parport0 (interrupt-driven). =
=20
Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com) =
=20
block: 128 slots per queue, batch=3D32 =
=20
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize =
=20
Uniform Multi-Platform E-IDE driver Revision: 6.31 =
=20
ide: Assuming 33MHz system bus speed for PIO modes; override with =
idebus=3Dxx =
=20
NS87415: IDE controller on PCI bus 00 dev 70 =
=20
NS87415: chipset revision 3 =20
NS87415: 100% native mode on irq 103 =20
ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:pio, hdb:pio =
=20
ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:pio, hdd:pio =
=20
hda: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive =
=20
ide0 at 0xf00-0xf07,0xe02 on =20
hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache =
=20
Uniform CD-ROM driver Revision: 3.12 =20
loop: loaded (max 8 devices) =20
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001) =
=20
tulip0: no phy info, aborting mtable build =
=20
tulip0: MII transceiver #1 config 1200 status 7809 advertising 01e1. =
=20
eth0: Digital DS21143 Tulip rev 65 at 0x1000, 00:30:6E:21:4B:D2, IRQ 66. =
=20
SCSI subsystem driver Revision: 1.00 =20
sym53c8xx: at PCI bus 0, device 15, function 0 =
=20
sym53c8xx: 53c896 detected =20
sym53c8xx: at PCI bus 0, device 15, function 1 =
=20
sym53c8xx: 53c896 detected =20
sym53c896-0: rev 0x7 on pci bus 0 device 15 function 0 irq 65 =
=20
sym53c896-0: ID 7, Fast-20, Parity Checking =
=20
Linux version 2.4.17-32 (root@paer) (gcc version 3.0.4) #1 Sat Mar 16 =
17:09:00 M =
=20
ST 2002 =20
FP[0] enabled: Rev 1 Model 19 =20
The 32-bit Kernel has started... =20
Determining PDC firmware type: System Map. =
=20
model 00005dc0 00000481 00000000 00000002 77634812 100000f0 00000008 =
000000b2 00 =
=20
0000b2 =20
vers 00000203 =20
CPUID vers 19 rev 7 (0x00000267) =20
model 9000/785/C3700 =20
Total Memory: 2048 Mb =20
initrd: 4fd65000-4ffef286 =20
initrd: reserving 3fd65000-3ffef286 (mem_max 80000000) =
=20
pagetable_init =20
On node 0 totalpages: 524288 =20
zone(0): 524288 pages. =20
zone(1): 0 pages. =20
zone(2): 0 pages. =20
LCD display at f05d0008,f05d0000 registered =
=20
Kernel command line: ramdisk_size=3D8192 root=3D/dev/ram console=3DttyS0 =
TERM=3Dvt102 pa =
=20
lo_kernel=3D0/vmlinux =20
Console: colour dummy device 160x64 =20
Calibrating delay loop... 1497.49 BogoMIPS =
=20
Memory: 2058652k available =20
Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes) =
=20
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) =
=20
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) =
=20
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) =
=20
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) =
=20
Searching for devices... =20
Found devices: =20
1. Astro BC Runway Port (12) at 0xfed00000 [10], versions 0x582, 0x0, =
0xb =
=20
2. Elroy PCI Bridge (13) at 0xfed30000 [10/0], versions 0x782, 0x0, 0xa =
=20
3. Elroy PCI Bridge (13) at 0xfed32000 [10/1], versions 0x782, 0x0, 0xa =
=20
4. Elroy PCI Bridge (13) at 0xfed38000 [10/4], versions 0x782, 0x0, 0xa =
=20
5. Elroy PCI Bridge (13) at 0xfed3c000 [10/6], versions 0x782, 0x0, 0xa =
=20
6. Unknown machine (0) at 0xfffa0000 [32], versions 0x5dc, 0x0, 0x4 =
=20
7. Memory (1) at 0xfed10200 [49], versions 0x9c, 0x0, 0x9 =
=20
CPU(s): 1 x PA8600 (PCX-W+) at 750.000000 MHz =
=20
SBA found Astro 2.1 at 0xfed00000 =20
lba version TR4.0 (0x5) found at 0xfed30000 =
=20
lba version TR4.0 (0x5) found at 0xfed32000 =
=20
lba version TR4.0 (0x5) found at 0xfed38000 =
=20
lba version TR4.0 (0x5) found at 0x =20
iosapic: hpa not registered for PCI device 103c:1008 (Hewlett-Packard =
Company) =
=20
POSIX conformance testing by UNIFIX =20
Linux NET4.0 for Linux 2.4 =20
Based upon Swansea University Computer Society NET3.039 =
=20
Initializing RT netlink socket =20
Enabled soft power switch (polling mode, io=3D0xf0400804). =
=20
SuperIO: Found NS87560 Legacy I/O device at 00:0e.1 (IRQ 64) =
=20
SuperIO: Serial port 1 at 0x3f8 =20
SuperIO: Serial port 2 at 0x2f8 =20
SuperIO: Parallel port at 0x378 =20
SuperIO: Floppy controller at 0x3f0 =20
SuperIO: ACPI at 0x7e0 =20
SuperIO: USB reg =20
parport0: PC-style at 0x378, irq 101 [PCSPP(,...)] =
=20
Starting kswapd =20
Journalled Block Device driver loaded =
=20
PCI graphic ROM found at f7000000 (2048 kB), fb @ fa000000 (32 MB) =
=20
STI word mode ROM at f7000044, hpa=3Dfa000000 =
=20
STI word mode ROM, id 35acda30-9a02587, conforms to spec rev. 8.0d =
=20
STI device: A1299B =20
pty: 256 Unix98 ptys configured =20
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ =
SERIAL_PCI en =
=20
abled =20
ttyS00 at port 0x03f8 (irq =3D 99) is a 16550A =
=20
ttyS01 at port 0x02f8 (irq =3D 100) is a 16550A =
=20
lp0: using parport0 (interrupt-driven). =
=20
Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com) =
=20
block: 128 slots per queue, batch=3D32 =
=20
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize =
=20
Uniform Multi-Platform E-IDE driver Revision: 6.31 =
=20
ide: Assuming 33MHz system bus speed for PIO modes; override with =
idebus=3Dxx =
=20
NS87415: IDE controller on PCI bus 00 dev 70 =
=20
NS87415: chipset revision 3 =20
NS87415: 100% native mode on irq 103 =20
ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:pio, hdb:p =
=20
ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:pio, hdd:pio =
=20
hda: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive =
=20
ide0 at 0xf00-0xf07,0xe02 on irq 103 =20
hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache =
=20
Uniform CD-ROM driver Revision: 3.12 =20
loop: loaded (max 8 devices) =20
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001) =
=20
tulip0: no phy info, aborting mtable build =
=20
tulip0: MII transceiver #1 config 1200 status 7809 advertising 01e1. =
=20
eth0: Digital DS21143 Tulip rev 65 at 0x1000, 00:30:6E:21:4B:D2, IRQ 66. =
=20
SCSI subsystem driver Revision: 1.00 =20
sym53c8xx: at PCI bus 0, device 15, function 0 =
=20
sym53c8xx: 53c896 detected =20
sym53c8xx: at PCI bus 0, device 15, function 1 =
=20
sym53c8xx: 53c896 detected =20
sym53c896-0: rev 0x7 on pci bus 0 device 15 function 0 irq 65 =
=20
sym53c896-0: ID 7, Fast-20, Parity Checking =
=20
WARNING! Stack pointer and cr30 do not correspond! =
=20
Dumping virtual address stack instead =
=20
Dumping Stack from 0x203e8000 to 0x203e8b00: =
=20
8000 1cf21f4b 60933501 39928bc5 c150df50 7325178b 82a1bea1 e64a2f17 =
05437d43 =
=20
8020 cce2eb7d 0af04fd4 99b363a9 15962afa 33107201 2b5ae0a6 66565151 =
56c3741enter command > sea =20
Searching for potential bo
8040 ccda17f1 adf05d6e 99b42fe3 5be0badd 331eea95 b7b7c0e8 663dd52b =
6f6f81d1l minutes. =20
To discontinue search, press any k
8060 cc0d1f05 dea9b6f0 981a3e0b bd536de1 30347c17 7aa6dbc3 601e4d7d =
f53b02d4 =20
Path Number Device Path =20
8080 c03c9afb ea7605a9 807935f7 d4ec0b53 00f26bef a9d816a7 01e4d7df =
53b02d4f ----------- ----------------- ----------- =
=20
80a0 03bf1aed a716efcc 077e35db 4e2ddf99 0e8adee5 9c2d0a60 1d15bdcb =
385a14c1 HL-DT-ST GCE-8481B =
=20
80c0 3a5dcec5 70c29cd0 74cd28d9 e1f38cf2 e99a51b3 c3e719e5 d334a367 =
87ce33cb18406LC =
=20
=20
80e0 a66946cf 0f9c6797 4ca438cd 1f4e7a7c 993ec4c9 3ee =
=20
8200 38d02703 3c1cffcd 71d6fb55 784f4ac8 e3db43f9 f0e820c2 c7b687f3 =
e1d04185 =20
Available memory: 2147483648 bytes
8220 8f6d0fe7 c3a0830b 1eda1fcf 87410617 3db43f9f 0e820c2f 7b1eca6d =
1d72ad0c 15732736 bytes =
=20
Prim
8240 f64b2189 3a93ef4a ece0f641 75516bc6 d9b759d1 ead462de b36eb3a3 =
d5a8c5bdot path: SCSI.6.0 =20
Console path: S
8260 66dd6747 ab518b7b cdbace8f 56a316f7 9b03284d ad3098bc 3606509b =
5a613179th: USB =20
----- Main Menu -----------------
8280 6c7a1465 b4b4d7a0 d8f428cb 6969af41 b19ee4c5 d2a5ebd0 633dc98b =
a54bd7a1 =20
Command =20
82a0 c67b9317 4a97af43 8c81937d 9559ebd4 190326fb 2ab =20
=20
----- =20
Main Menu: Enter command > bo id
83e0 d9ceaf65 82cccd20 b39d5ecb 05999a41 674c08c5 0b4581d0 ceeea4d9 =
16fdb6f2 =20
Booting... =20
Boot IO Dependent Code (IODC) rev
8400 9dabfce1 2d8dd8b6 3b214c91 5b6d043e 76342c71 b6acbd2e ec6858e3 =
6d597a5dlo ipl 1.0 root@palinux Mon Apr 1 10:02:53 MST 2002 =
=20
8420 d8a60495 dac441e8 b14c092b b58883d1 62981257 6b1107a3 c54691fd =
d654ba140/vmlinux32 4250101 bytes @ 0x458800 =
=20
8440 8a8d23fb aca97429 151a47f7 5952e853 2a423abd b2d365f4 5484757b =
65a6cbe9 =20
0/ramdisk 2656756 bytes @ 0xdac800 =20
8460 a97e5fa5 cb3b2280 52fcbf4b 96764501 a5f97e97 2ceman =
=20
8560 c99f7ee9 fd53e01a 933efdd3 faa7c035 267dfba7 f54f806b 4cfbf74f =
ea9f00d7 =20
This box can boot either 32 o
8580 99f7ee9f d53e01af 33efdd3f aa7c035f 67dfba7f 54f806bf cfc9c1ad =
a986b82c =20
32-bit kernelELF32 e
85a0 9f93835b 530d7059 3f51b3e5 a66c55e0 7ea367cb 4cd8abc1 fd307ac5 =
99c7e2d0 =20
Segment 0 load 00100000 size 2359528 mediaptr=20
85c0 fa60f58b 338fc5a1 f4b75e45 67693e10 e91809d9 cea4c972 d23013b3 =
9d4992e542000 size 488912 mediaptr 0x242000 =
=20
85e0 a4602767 3a9325cb 48b6fb9d 7550fec4 911b4269 ead748da 223684d3 =
d5ae91b5 =20
Segment 3 load 003fc000 size 8192
8600 446d09a7 ab5d236b 88da134f 56ba46d7 11c293cd ad0238fc 2385279b =
5a0471f9 4 load 00400000 size 32768 mediaptr 0x2fa000 =
=20
8620 477cfa65 b47e56a0 8ef9f4cb 68fcad41 1d855cc5 d18264 mediapt =
=20
86a0 478145f1 eb440e6e 8f028be3 d6881cdd 1e0517c7 ad1039bb 3c0a2f8f =
5a2073773.0.4) #1 Wed Oct 22 17:45:10 =
=20
86c0 7862ea4d b43653bc f0c5d49b 686ca779 e1fd1c65 d0affba0 c3fa38cb =
a15ff741l 19 =20
The 32-bit Kernel has started... =20
86e0 87f47197 42bfee83 0f9e567d 85096854 1f3cacfb 0a12d0a9 3e0feca5 =
14531400 =20
model 00005dc0 00000481 00000000 00000002 776
8700 7c696c19 28d09d52 f8a46d61 51d78ff6 f13e6f91 a3d =
=20
8740 49b1bbe1 f040f036 936377c3 e081e06d 26c6ef87 c103c0db 4d8ddf0f =
820781b7d: 4fd66000-4ffee9f4 =20
initrd: reserving 3fd66000-3ff
8760 9b1bbe1f 040f036f 3641c96d 0868b38c 6cf52789 10a7d24a d99cfa41 =
213911c6=20
pagetable_init =20
On node 0 totalpages: 524288 =20
8780 b34f41d1 420496de 66e836f1 847f98ee cdd06de3 08ff31dd 9bd66e95 =
1188d6e8 =20
zone(2): 0 pages. =20
LCD display at f05d0008,f0
87a0 37da6879 23671882 6fc265a1 46b88456 dff27e11 8d07bdfe bfe4fc23 =
1a0f7bfdine: ramdisk_size=3D8192 root=3D/dev/ram console=3DttyS0 =
TERM=3Dvt102 pa =20
87c0 7fbf4d15 346842a8 ff082f79 68a63002 fe66eba1 d13ad556 fccdd743 =
a275aaadl=3D0/vmlinux =20
Console: colour dummy device 160x64 =20
87e0 f99bae87 44eb555b f341e85d 89a01fe4 e683d0bb 13497.49 BogoMIP =
=20
-------
8900 d7762b37 6520e5f3 ae9ae33d ca377eb4 5d35c67b 946efd69 ba6b8cf7 =
28ddfad3 =
=20
=20
8920 74a1acbd 51cd40f4 e935ec29 a3ec34ba d26bd853 47d86975 a4a105f5 =
8fc667b8 =
=20
--
8940 49420beb 1f8ccf71 92f2a285 3f6f2bb0 2593f059 7ea8e232 4b5155e1 =
fd277136 =
=20
8960 96a2abc3 fa4ee26d 2d455787 f49dc4db 5a8aaf0f e93b89b7 b5155e1f =
d277136f36 kB =
=20
8980 6a2abc3f a4ee26df d455787f 49dc4dbf a8dc45ad 93ce2e2c 51b88b5b =
279c5c59 =20
Available memory: 2147483648 byte
89a0 a307a3e5 4f4e0de0 4679f299 9eeaae92 8cf3e533 3ddod memory required: =
=20
89a0 a307a3e5 4f4e0de0 4679f299 9eeaae92 8cf3e533 3ddod memory required: =
=20
8aa0 8736bfb7 37b59133 0e1bca3d 6f1d9734 1c412129 de4d9b3a 38824253 =
bc9b3675
8ac0 710484a7 79366ceb e27fbc1d f21a6c84 c4ff783b e434d909 89fef077 =
c869b213
8ae0 13fde0ef 90d36427 27fbc1df 21a6c84f 4f8136ed 433b25cc 9f74d889 =
8600feca
High Priority Machine Check (HPMC): Code=3D1 regs=3D102f3080 =
(Addr=3D00000000)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001001111101000001101 Not tainted
r00-03 00000000 00000000 1034bda0 000f4000
r04-07 12378350 00000010 12378000 00000000
r08-11 00000002 1237800c 12378050 10323010
r12-15 00000000 10376c08 102d2000 00000038
r16-19 0000000f 103234d4 10323010 000f423f
r20-23 0000000f f4005014 00000001 f4005000
r24-27 000f423f 000bb800 00000001 102f0010
r28-31 00000000 00001d4c 103e8b00 10201f40
sr0-3 00000000 00000000 00000000 00000000
sr4-7 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 1034be68 1034be6c
IIR: 0ea00013 ISR: a607ffd0 IOR: 01405014
CPU: 0 CR30: 103e8000 CR31: 103a0000
ORIG_R28: 00000000
------=_NextPart_000_0025_01C3AADE.E8216470
Content-Type: text/plain;
name="komunikat.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="komunikat.txt"
Firmware Version 1.6 =20
Duplex Console IO Dependent Code (IODC) revision 1 =
=20
-------------------------------------------------------------------------=
----- =
=20
(c) Copyright 1995-2000, Hewlett-Packard Company, All rights reserved =
=20
-------------------------------------------------------------------------=
----- =
=20
Processor Speed State Coprocessor State I/D =
Cache =
=20
--------- -------- --------------------- ---------- =
=20
0 750 MHz Active Functional 768 =
kB/1536 kB =
=20
Central Bus Speed: 120 MHz =
=20
Available memory: 2147483648 bytes =
=20
Good memory required: 15732736 bytes =
=20
Primary boot path: FWSCSI.6.0 =20
Alternate boot path: SCSI.6.0 =20
Console path: SERIAL_1.9600.8.none =
=20
Keyboard path: USB =20
----- Main Menu =
------------------------------------------------------------- =
=20
Command Description =
=20
------- ----------- =
=20
BOot [PRI|ALT|<path>] Boot from specified path =
=20
PAth [PRI|ALT|CON|KEY [<path>]] Display or modify a path =
=20
SEArch [DIsplay|[[IPL] [<path>]]] Search for boot devices =
=20
COnfiguration [<command>] Access Configuration =
menu/commands =
=20
INformation [<command>] Access Information menu/commands =
=20
SERvice [<command>] Access Service menu/commands =
=20
DIsplay Redisplay th =
=20
HElp [<menu>|<command>] Display help for menu or command =
=20
RESET Restart the system =
=20
----- =20
Main Menu: Enter command > bo ide =20
Interact with IPL (Y, N, Q)?> y =20
Booting... =20
Boot IO Dependent Code (IODC) revision 0 =
=20
HARD Booted. =20
palo ipl 1.0 root@palinux Mon Apr 1 10:02:53 MST 2002 =
=20
Boot image contains: =20
0/vmlinux32 4250101 bytes @ 0x458800 =
=20
0/vmlinux64 5527820 bytes @ 0x866800 =
=20
0/ramdisk 2656756 bytes @ 0xdac800 =
=20
Information: No console specified on kernel comman =
=20
PALO will choose the console currently used by firmware (serial).Current =
command =
=20
line: =20
0/vmlinux ramdisk_size=3D8192 root=3D/dev/ram initrd=3D0/ramdisk =
console=3DttyS0 TERM=3Dvt =
=20
102 =20
0: 0/vmlinux =20
1: ramdisk_size=3D8192 =20
2: root=3D/dev/ram =20
3: initrd=3D0/ramdisk =20
4: console=3DttyS0 =20
5: TERM=3Dvt102 =20
Edit which field? =20
(or 'b' to boot with this command line)? b =
=20
Command line for kernel: 'ramdisk_size=3D8192 root=3D/dev/ram =
console=3DttyS0 TERM=3Dvt1 =
=20
02 palo_kernel=3D0/vmlinux' =20
Selected kernel: /vmlinux from partition 0 =
=20
Selected ramdisk: /ramdisk =20
Warning: kernel name doesn't end with 32 or 64 -- Guessing... =
=20
This box can boot either 32 or 64-bit kernels...Both kernels available, =
choosing =
=20
32-bit kernelELF32 executable =20
Entry 00100268 first 00100000 n 6 =20
Segment 0 load 00100000 size 2359528 mediaptr 0x1000 =
=20
Segment 1 load 00342000 size 488912 mediaptr 0x242000 =
=20
Segment 2 load 003bc000 size 252764 mediaptr 0x2ba000 =
=20
Segment 3 load 003fc000 size 8192 mediaptr 0x2f8000 =
=20
Segment 4 load 00400000 size 32768 mediaptr 0x2fa000 =
=20
Segment 5 load 0042ab70 size 121264 mediapt =
=20
Loading ramdisk 2656756 bytes @ 3fd66000... =
=20
Branching to kernel entry point 0x00100268. If this is the last =
=20
message you see, you may need to switch your console. This is =
=20
a common symptom -- search the FAQ and mailing list at parisc-linux.org =
=20
Linux version 2.4.22-32 (root@k2000) (gcc version 3.0.4) #1 Wed Oct 22 =
17:45:10 =
=20
CEST 2003 =20
FP[0] enabled: Rev 1 Model 19 =20
The 32-bit Kernel has started... =20
Determining PDC firmware type: System Map. =
=20
model 00005dc0 00000481 00000000 00000002 77634812 100000f0 00000008 =
000000b =
=20
0000b2 =20
vers 00000203 =20
CPUID vers 19 rev 7 (0x00000267)
capabilities 0x7
model 9000/785/C3700
Total Memory: 2048 Mb
initrd: 4fd66000-4ffee9f4
initrd: reserving 3fd66000-3ffee9f4 (mem_max 80000000)
pagetable_init
On node 0 totalpages: 524288
zone(0): 524288 pages.
zone(1): 0 pages.
zone(2): 0 pages.
LCD display at f05d0008,f05d0000 registered
Kernel command line: ramdisk_size=3D8192 root=3D/dev/ram console=3DttyS0 =
TERM=3Dvt102 pa
lo_kernel=3D0/vmlinux
Console: colour dummy device 160x64
Calibrating delay loop... 1497.49 BogoMIPS
Memory: 2066424k available
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
Searching for devices...
------=_NextPart_000_0025_01C3AADE.E8216470--