[parisc-linux] SMP problems
Arto Jantunen
viiru@debian.org
Thu, 12 Sep 2002 08:48:34 +0300
--17pEHd4RhPHOinZp
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
This is a HP9000/R390 machine, or atleast the previous owner
said so. It has two PA8200 cpu's running at 240Mhz, but I have
disabled the second cpu for debuging this problem. As you can see
from the attached minicom capture, if running an SMP kernel with
only one cpu, it crashes. It also crashes when running on two cpu's,
which is why I am reporting this. This proves that the problem has
nothing to do with the two cpu's stepping on each others toes or
anything. The machine runs perfectly stable on an UP kernel. Any
comments, suggestions of things that I could do to help someone
debug it and anything else is welcome. Please CC me on replies,
I'm not on the list.
--
Arto Jantunen
--17pEHd4RhPHOinZp
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="minicom.cap"
Content-Transfer-Encoding: quoted-printable
Firmware Version 38.39
Duplex Console IO Dependent Code (IODC) revision 0
---------------------------------------------------------------------------=
---
(c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
---------------------------------------------------------------------------=
---
Processor Speed State Coprocessor State Cache Size
--------- -------- --------------------- ----------------- ----------
0 240 MHz Active Functional 2 MB
1 240 MHz Stopped:Deconfigured Unknown 2 MB
Central Bus Speed (in MHz) : 120=20
Model: R390/2
Available memory (bytes) : 1073733632=20
Good memory required (bytes): 86876160=20
Primary boot path: 8/4.1 (dec) =20
Alternate boot path: 8/4.6 (dec) =20
Console path: 8/16/4.0 (dec) =20
Keyboard path: 8/16/7.0 (dec) =20
CPU 0
WARNING: Memory has been initialized, but not tested as a result of
FASTBOOT being enabled. To test memory, use the FASTBOOT
command in the CONFIGURATION menu and reboot the system.
Processor is starting autoboot process.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
------------------------
Booting...=20
Boot IO Dependent Code (IODC) revision 152
HARD Booted.
palo ipl 1.0 root@palinux Mon Apr 1 10:02:53 MST 2002
Partition Start(MB) End(MB) Id Type
1 1 16 f0 Palo
2 49 1002 82 swap
3 1003 4094 83 ext2
4 17 48 83 ext2
PALO(F0) partition contains:
0/vmlinux32 3687647 bytes @ 0x48000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: 'root=3D/dev/sda3 HOME=3D/ console=3DttyS0 TERM=3D=
vt102 palo_kernel=3D4/vmlinux'
Selected kernel: /vmlinux from partition 4
ELF32 executable
Entry 00100000 first 00100000 n 6
Segment 0 load 00100000 size 1893508 mediaptr 0x1000
Segment 1 load 002d0000 size 596888 mediaptr 0x1d0000
Segment 2 load 00364000 size 221560 mediaptr 0x262000
Segment 3 load 0039c000 size 8192 mediaptr 0x299000
Segment 4 load 003a0000 size 32768 mediaptr 0x29b000
Segment 5 load 003e38a4 size 82000 mediaptr 0x2a38a4
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.4.19-pa14 (root@elli) (gcc version 3.0.4) #1 SMP Wed Sep 11=
12:54:30 EEST 2002
FP[0] enabled: Rev 0 Model 14
The 32-bit Kernel has started...
Determining PDC firmware type: System Map.
model 00005ba0 00000491 00000000 00000002 7777173a 100000f0 00000008 000000=
b2 000000b2
vers 00000501
CPUID vers 14 rev 23 (0x000001d7)
capabilities 0x3
model 9000/800/R390
Total Memory: 1024 Mb
pagetable_init
On node 0 totalpages: 262144
zone(0): 262144 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=3D/dev/sda3 HOME=3D/ console=3DttyS0 TERM=3Dvt102=
palo_kernel=3D4/vmlinux
Console: colour dummy device 160x64
Calibrating delay loop... 478.41 BogoMIPS
Memory: 1033080k available
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Searching for devices...
Found devices:
1. U2-IOA BC Runway Port (12) at 0xfff88000 [8], versions 0x580, 0xf, 0xb
2. Bluefish Add-on FW-SCSI (4) at 0xf1004000 [8/4], versions 0x13, 0x1, 0x89
3. HP HSC-PCI Cards (4) at 0xf1008000 [8/8], versions 0x4, 0x0, 0x9d
4. UL 550 Lasi Core BA (11) at 0xffd00000 [8/16], versions 0x2f, 0x0, 0x81,=
additional addresses: 0xffd0c000 0xffc00000=20
5. UL 550 Core Centronics (10) at 0xffd02000 [8/16/0], versions 0x2f, 0x0, =
0x74, additional addresses: 0xffd01000 0xffd03000=20
6. UL 550 Lasi Core RS-232 (10) at 0xffd05000 [8/16/4], versions 0x2f, 0x0,=
0x8c
7. UL 550 Core SCSI (10) at 0xffd06000 [8/16/5], versions 0x2f, 0x0, 0x82
8. UL 350 Core LAN (802.3) (10) at 0xffd07000 [8/16/6], versions 0x2f, 0x0,=
0x8a
9. UL 550 Core PS/2 Port (10) at 0xffd08000 [8/16/7], versions 0x2f, 0x0, 0=
x84
10. UL 550 Core PS/2 Port (10) at 0xffd08100 [8/16/8], versions 0x2f, 0x0, =
0x84
11. UL 550 Core Wax BA (11) at 0xffe00000 [8/20], versions 0x31, 0x0, 0x8e
12. UL 550 Wax Core RS-232 (10) at 0xffe02000 [8/20/2], versions 0x31, 0x0,=
0x8c
13. UL 550 Wax EISA BA (11) at 0xfc000000 [8/20/5], versions 0x31, 0x0, 0x9=
0, additional addresses: 0xffc88000=20
14. U2-IOA BC GSC+ Port (7) at 0xf103f000 [8/63], versions 0x501, 0x1, 0xc
15. U2-IOA BC Runway Port (12) at 0xfff8a000 [10], versions 0x580, 0xf, 0xb
16. Bluefish Add-on FW-SCSI (4) at 0xf180c000 [10/12], versions 0x13, 0x1, =
0x89
17. U2-IOA BC GSC+ Port (7) at 0xf183f000 [10/63], versions 0x501, 0x1, 0xc
18. UL 2w U+/240 (350/550) (0) at 0xfffa0000 [32], versions 0x5ba, 0x0, 0x4
19. Memory (1) at 0xfffb1000 [49], versions 0x7e, 0x0, 0x9
CPU(s): 1 x PA8200 (PCX-U+) at 240.000000 MHz
Found U2 at 0xfff88000
Found U2 at 0xfff8a000
Lasi version 0 at 0xffd00000 found.
LED display at ffd0c000 registered
Wax at 0xffe00000 found.
Wax EISA Adapter found at 0xfc000000
EISA EEPROM at 0xffc88000
Enumerating EISA bus
EISA slot 1 a configured board was not detected ( expected ___FFFF)
Dino version 3.x (card mode) found at 0xf1008000
Dino: Failed to allocate memory region
POSIX conformance testing by UNIFIX
SMP: Bootstrap processor only.
SMP: Total 1 of 1 processors activated (478.41 BogoMIPS noticed).
Waiting on wait_init_idle (map =3D 0x0)
All processors have done init_idle
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Soft power switch enabled, polling @ 0xf0140000.
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
parport_init_chip: initialize bidirectional-mode.
parport0: PC-style at 0xffd02800, irq 88 [PCSPP,TRISTATE]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_P=
CI enabled
ttyS00 at iomem 0xffd05800 (irq =3D 90) is a 16550A
ttyS01 at iomem 0xffe02800 (irq =3D 121) is a 16550A
PS/2 keyboard port at 0xffd08000 (irq 69) found, no device attached.
lp0: using parport0 (interrupt-driven).
Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Found i82596 at 0xffd07000, IRQ 87
eth0: 82596 at 0xffd07000, 08 00 09 A3 38 14 IRQ 87.
82596.c $Revision: 1.29 $
SCSI subsystem driver Revision: 1.00
zalon_scsi_callback: Zalon vers field is 0x1, IRQ 36
ncr53c8xx: 53c720 detected
ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential
zalon_scsi_callback: Zalon vers field is 0x1, IRQ 37
ncr53c8xx: 53c720 detected
ncr53c720-1: ID 7, Fast-10, Parity Checking, Differential
scsi0 : ncr53c8xx-3.4.3b-20010512
scsi1 : ncr53c8xx-3.4.3b-20010512
Vendor: SEAGATE Model: ST34573WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP15
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP15
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST34573WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
53c700: Version 2.7 By James.Bottomley@HansenPartnership.com
scsi2: 53c710 rev 2=20
scsi2 : LASI SCSI 53c700
scsi2: (2:0) Synchronous at offset 8, period 100ns
Vendor: HP Model: DVD-ROM 6x/32x Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
scsi2: (3:0) Synchronous at offset 8, period 100ns
Vendor: HP Model: C1537A Rev: HP02
Type: Sequential-Access ANSI SCSI revision: 02
st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs =
16
Attached scsi tape st0 at scsi2, channel 0, id 3, lun 0
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 2, lun 0
Attached scsi disk sdc at scsi0, channel 0, id 3, lun 0
Attached scsi disk sdd at scsi0, channel 0, id 4, lun 0
Attached scsi disk sde at scsi0, channel 0, id 5, lun 0
Attached scsi disk sdf at scsi0, channel 0, id 6, lun 0
Attached scsi disk sdg at scsi1, channel 0, id 1, lun 0
Attached scsi disk sdh at scsi1, channel 0, id 2, lun 0
Attached scsi disk sdi at scsi1, channel 0, id 3, lun 0
Attached scsi disk sdj at scsi1, channel 0, id 4, lun 0
Attached scsi disk sdk at scsi1, channel 0, id 5, lun 0
Attached scsi disk sdl at scsi1, channel 0, id 6, lun 0
ncr53c720-0-<1,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sda: 8388314 512-byte hdwr sectors (4295 MB)
Partition check:
sda: sda1 sda2 sda3 sda4
ncr53c720-0-<2,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sdb: 8388314 512-byte hdwr sectors (4295 MB)
sdb: unknown partition table
ncr53c720-0-<3,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sdc: 8388314 512-byte hdwr sectors (4295 MB)
sdc: unknown partition table
ncr53c720-0-<4,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sdd: 8388314 512-byte hdwr sectors (4295 MB)
sdd: unknown partition table
ncr53c720-0-<5,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sde: 8388314 512-byte hdwr sectors (4295 MB)
sde: unknown partition table
ncr53c720-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sdf: 8388314 512-byte hdwr sectors (4295 MB)
sdf: unknown partition table
ncr53c720-1-<1,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sdg: 8388314 512-byte hdwr sectors (4295 MB)
sdg: unknown partition table
ncr53c720-1-<2,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sdh: 8388314 512-byte hdwr sectors (4295 MB)
sdh: unknown partition table
ncr53c720-1-<3,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sdi: 8388314 512-byte hdwr sectors (4295 MB)
sdi: unknown partition table
ncr53c720-1-<4,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sdj: 8388314 512-byte hdwr sectors (4295 MB)
sdj: unknown partition table
ncr53c720-1-<5,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sdk: 8388314 512-byte hdwr sectors (4295 MB)
sdk: unknown partition table
ncr53c720-1-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sdl: 8388314 512-byte hdwr sectors (4295 MB)
sdl: unknown partition table
Attached scsi CD-ROM sr0 at scsi2, channel 0, id 2, lun 0
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 504.400 MB/sec
8regs_prefetch: 443.600 MB/sec
32regs : 459.600 MB/sec
32regs_prefetch: 432.400 MB/sec
raid5: using function: 8regs (504.400 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 48Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 216k freed
INIT: version 2.84 booting
Activating swap.
Adding Swap: 977140k swap-space (priority -1)
Checking root file system...
fsck 1.28 (31-Aug-2002)
/dev/sda3: clean, 30096/396000 files, 160528/791616 blocks
System time was Thu Sep 12 05:23:22 UTC 2002.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Thu Sep 12 05:23:20 UTC 2002.
Calculating module dependencies... done.
Loading modules:=20
Starting RAID devices: [events: 00000012]
[events: 00000012]
[events: 00000012]
[events: 00000012]
[events: 00000012]
[events: 00000012]
md: autorun ...
md: considering sdg ...
md: adding sdg ...
md: adding sdf ...
md: adding sde ...
md: adding sdd ...
md: adding sdc ...
md: adding sdb ...
md: created md0
md: bind<sdb,1>
md: bind<sdc,2>
md: bind<sdd,3>
md: bind<sde,4>
md: bind<sdf,5>
md: bind<sdg,6>
md: running: <sdg><sdf><sde><sdd><sdc><sdb>
md: sdg's event counter: 00000012
md: sdf's event counter: 00000012
md: sde's event counter: 00000012
md: sdd's event counter: 00000012
md: sdc's event counter: 00000012
md: sdb's event counter: 00000012
md0: max total readahead window set to 992k
md0: 4 data-disks, max readahead per data-disk: 248k
raid5: spare disk sdg
raid5: device sdf operational as raid disk 4
raid5: device sde operational as raid disk 3
raid5: device sdd operational as raid disk 2
raid5: device sdc operational as raid disk 1
raid5: device sdb operational as raid disk 0
raid5: allocated 5436kB for md0
raid5: raid level 5 set md0 active with 5 out of 5 devices, algorithm 2
RAID5 conf printout:
--- rd:5 wd:5 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sdb
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdc
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:sdd
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sde
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sdf
RAID5 conf printout:
--- rd:5 wd:5 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sdb
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdc
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:sdd
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sde
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sdf
md: updating md0 RAID superblock on device
md: sdg [events: 00000013]<6>(write) sdg's sb offset: 4194048
md: sdf [events: 00000013]<6>(write) sdf's sb offset: 4194048
md: sde [events: 00000013]<6>(write) sde's sb offset: 4194048
md: sdd [events: 00000013]<6>(write) sdd's sb offset: 4194048
md: sdc [events: 00000013]<6>(write) sdc's sb offset: 4194048
md: sdb [events: 00000013]<6>(write) sdb's sb offset: 4194048
md: ... autorun DONE.
/dev/md0 done.
Checking all file systems...
fsck 1.28 (31-Aug-2002)
/dev/sda4: clean, 25/8256 files, 18237/32769 blocks
Setting kernel variables.
Mounting local filesystems...
/dev/sda4 on /boot type ext2 (rw)
Running 0dns-down to make sure resolv.conf is ok...done.
Cleaning: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces: eth0: link ok.
done.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Thu Sep 12 08:23:37 EEST 2002
Cleaning: /tmp /var/lock /var/run.
Initializing random number generator... done.
Recovering nvi editor sessions... done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting OpenLDAP: slapd.
Starting internet superserver: inetd.
Starting mail transport agent: Postfix.
Starting OpenBSD Secure Shell server: sshd.
Starting teapop: teapop.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
Debian GNU/Linux testing/unstable elli ttyS0
elli login: root
Password:=20
Last login: Wed Sep 11 15:47:34 2002 on ttyS0
Linux elli 2.4.19-pa14 #1 SMP Wed Sep 11 12:54:30 EEST 2002 parisc unknown =
unknown GNU/Linux
Most of the programs included with the Debian GNU/Linux system are
freely redistributable; the exact distribution terms for each program
are described in the individual files in /usr/share/doc/*/copyright
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
elli:~# uname -=08 =08=08 =08=08 =08=08 =08=08 =08=08 =08=08 =08=07=07=07=
=07cat /proc/pcu=08 =08=08 =08=08 =08cpuinfo
processor : 0
cpu family : PA-RISC 2.0
cpu : PA8200 (PCX-U+)
cpu MHz : 240.000000
model : 9000/800/R390
model name : UL 2w U+/240 (350/550)
hversion : 0x00005ba0
sversion : 0x00000491
I-cache : 2048 KB
D-cache : 2048 KB (WB)
ITLB entries : 120
DTLB entries : 120 - shared with ITLB
bogomips : 478.41
software id : 2004293434
elli:~# sync && apt-get update
0% [Working] Hit http://security.debian.org stable/updates/main =
Packages
Hit http://security.debian.org stable/updates/main Release
Hit http://security.debian.org stable/updates/contrib Packages
Hit http://security.debian.org stable/updates/contrib Release
Hit http://security.debian.org stable/updates/non-free Packages
Hit http://security.debian.org stable/updates/non-free Release
19% [Connecting to ftp.fi.debian.org] [Waiting for file] =
Get:1 http://non-us.debian=
.org unstable/non-US/main Packages [34.2kB]
3% [Connecting to f=
tp.fi.debian.org (130.230.54.99)] [1 Packages 1106/34.2kB 3%] =
Get:2 htt=
p://ftp.fi.debian.org unstable/main Packages [1945kB]
=
0% [2 Packages 1093/1945kB 0%] [1 Packages 8346/34.2kB 24%] =
7% [2 Packages 115485/1945k=
B 5%] [Waiting for file] =
Get:3 http://non-us.debian.org unstable/non-US/main Release [89B]
Hit http://non-us.debian=
.org unstable/non-US/contrib Packages
Get:4 http://non-us.debi=
an.org unstable/non-US/contrib Release [92B]
Hit http://non-us.debian=
.org unstable/non-US/non-free Packages
Get:5 http://non-us.debi=
an.org unstable/non-US/non-free Release [93B]
Hit http://non-us.debian=
.org stable/non-US/main Sources
Hit http://non-us.debian=
.org stable/non-US/main Release
Hit http://non-us.debian=
.org stable/non-US/contrib Sources
7% [2 Packages 115485/1945kB 5%] [Waiting for file] =
Hit http://non-us.debian.org stable/non-US/contr=
ib Release
7% [2 Packages 115485/1945kB 5%] [Waiting for file] =
7% [1 Packages gzip 0] [2 Packages 115485/1945kB=
5%] [Waiting for file] =
Hit http://non-us.debian.org stable/non-US/non-free Sour=
ces
Hit =
http://non-us.debian.org stable/non-US/non-free Release
10% =
[1 Packages gzip 0] [2 Packages 174853/1945kB 8%] =
11% [2 Packages 190781/1945kB 9%] =
15% [2 Packages 280557/1945kB 14%]20% [2 Packages 376125/=
1945kB 19%]25% [2 Packages 465901/1945kB 23%]30% [2 Packages 564365/1945kB =
29%]34% [2 Packages 649797/1945kB 33%]37% [2 Packages 712061/1945kB 36%]41%=
[2 Packages 783013/1945kB 40%]45% [2 Packages 856861/1945kB 44%] =
48% [2 Packages 924917/1945kB 47%] =
153kB/s 6s51% [2 Packages 992973/1945kB 51%] =
153kB/s 6s55% [2 Packages 1072613/1945kB 55%] =
153kB/s 5s59% [2 Packages 1152253/1945kB 59%] =
153kB/s 5s62% [2 Packages 1198589/1945kB =
61%] 153kB/s 4s67% [2 Packages 1292709/19=
45kB 66%] 153kB/s 4s70% [2 Packages 13607=
65/1945kB 69%] 153kB/s 3s74% [2 Packages =
1431717/1945kB 73%] 153kB/s 3s78% [2 Pack=
ages 1509909/1945kB 77%] 153kB/s 2s81% [2=
Packages 1585205/1945kB 81%] 153kB/s 2s8=
5% [2 Packages 1661949/1945kB 85%] 153kB/=
s 1s90% [2 Packages 1750277/1945kB 89%] 1=
53kB/s 1s93% [2 Packages 1813989/1945kB 93%] =
153kB/s 0s97% [2 Packages 1897973/1945kB 97%] =
150kB/s 0s =
Get:6 http://ftp.fi.debian.org unstable/main Releas=
e [82B]
=
Hit http://ftp.fi.debian.org unstable/non-free Packages
=
Get:7 http://ftp.fi.debian.org unstable/non-free Release [86B]
=
Get:8 http://ftp.fi.debian.org unstable/contrib Packages [47.8kB]
97% [8 Packages 2308/47.8kB 4%] 150kB=
/s 0s97% [2 Packages gzip 0] [8 Packages 2308/47.8kB 4%] =
150kB/s 0s =
Get:9 http://ftp.fi.debian.org unstable/contrib Release [85B]
=
Hit http://ftp.fi.debian.org stable/main Sources
=
Hit http://ftp.fi.debian.org stable/main Release
=
Hit http://ftp.fi.debian.org stable/non-free Sources
=
Hit http://ftp.fi.debian.org stable/non-free Release
=
Hit http://ftp.fi.debian.org stable/contrib Sources
=
Hit http://ftp.fi.debian.org stable/contrib Release
99% [2 Packages gzip 212992] 150kB=
/s 0s99% [2 Packages gzip 2093056] =
150kB/s 0s99% [2 Packages gzip 4059136] =
150kB/s 0s99% [2 Packages gzip 5926912] =
150kB/s 0s99% [Working] =
150kB/s 0s99% [8 Packages gzip 0] =
150kB/s 0s100% [Working] =
150kB/s 0s =
Fetched 2027kB in 15s (131kB/s)
Reading Package Lists... 0%apt-get(285): unaligned access to 0x403cf08c at =
ip=3D0x4005e4f7
Reading Package=20
Lists... 0%
High Priority Machine Check (HPMC): Code=3D1 regs=3D102ea080 (Addr=3D000000=
00)
--17pEHd4RhPHOinZp--