[parisc-linux] Xfree86 doesn't run on 700
Yves Bodack
bodack@stud.fh-heilbronn.de
Wed, 16 Oct 2002 01:26:57 +0200
This is a multi-part message in MIME format.
------=_NextPart_000_001B_01C274B3.1E20A8A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hi,
take a look at your dmesg output. There you find something like:
model 9000/735
CPU(s): 1 x PA7100 (PCX-T) at 125.000000 MHz
STI GSC/PCI graphics driver version 0.9
STI device: HPA1439A
fb0: stifb 1280x1024-32 frame buffer device, id: 26d148ee, mmio: 0xf8100000
So it tells me I have a HP 9000/735/125 with 1280x1024x32 framebuffer...
On http://www.openpa.net/index.html you find descriptions and pictures of HP
700 machines. I also attached my XFree86conf-4, that should work, but you
may have to change color depth.
Greetings,
Yves...
> Hi,
> I just installed Debian 3.0 on an Apollo Series 700.
> I'm not sure of the model, but it has 96 Meg memory
> and a beautiful 19" 1280x1024 Sync on Green monitor.
>
> I have gotten it to boot fine, but cannot get xfree86
> configured for graphics. It does not come up with any
> info during the install, and I cannot find any info on
> what graphics system it has. I did see on a hardware
> list that it may have Coral SGC, but do not see this
> supported by XFree86.
>
> Thank you!
> Roland Hauff
------=_NextPart_000_001B_01C274B3.1E20A8A0
Content-Type: application/octet-stream;
name="XF86Config-4"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="XF86Config-4"
#=0A=
# This XFree86 config files is usable for HIL and USB keyboards and mice=0A=
# by Helge Deller <deller@gmx.de> 2002-07-06=0A=
#=0A=
# Please adjust the "depth" and "Modes" entries below in the Screen =
Section=0A=
# acording to your system configuration.=0A=
# =0A=
# EXAMPLE:=0A=
# Run the following command on the bash prompt:=0A=
#=0A=
# dmesg | grep stifb=0A=
#=0A=
# and my system gives:=0A=
# fb0: stifb 1280x1024-8 frame buffer device, id: 2b4ded6d, mmio: =
0xf8100000=0A=
# so I'm using "Depth 8" and "Modes 1280x1024" below.=0A=
#=0A=
=0A=
Section "Files"=0A=
FontPath "unix/:7100" # local font server=0A=
# if the local font server has problems, we can fall back on these=0A=
FontPath "/usr/lib/X11/fonts/misc"=0A=
FontPath "/usr/lib/X11/fonts/cyrillic"=0A=
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"=0A=
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"=0A=
FontPath "/usr/lib/X11/fonts/Type1"=0A=
FontPath "/usr/lib/X11/fonts/Speedo"=0A=
FontPath "/usr/lib/X11/fonts/100dpi"=0A=
FontPath "/usr/lib/X11/fonts/75dpi"=0A=
EndSection=0A=
=0A=
Section "Module"=0A=
Load "GLcore"=0A=
Load "bitmap"=0A=
Load "dbe"=0A=
Load "ddc"=0A=
Load "dri"=0A=
Load "extmod"=0A=
Load "freetype"=0A=
Load "glx"=0A=
Load "int10"=0A=
Load "pex5"=0A=
Load "record"=0A=
Load "speedo"=0A=
Load "type1"=0A=
Load "vbe"=0A=
Load "xie"=0A=
EndSection=0A=
=0A=
Section "InputDevice"=0A=
Identifier "Keyboard"=0A=
Driver "keyboard"=0A=
Option "CoreKeyboard"=0A=
# Option "XkbLayout" "de"=0A=
EndSection=0A=
=0A=
Section "InputDevice"=0A=
Identifier "Mouse"=0A=
Driver "mouse"=0A=
Option "CorePointer"=0A=
Option "Device" "/dev/input/mice"=0A=
Option "Protocol" "ImPS/2"=0A=
Option "ZAxisMapping" "4 5"=0A=
EndSection=0A=
=0A=
=0A=
Section "Device"=0A=
Identifier "Generic Video Card"=0A=
Driver "fbdev"=0A=
Option "UseFBDev" "true"=0A=
EndSection=0A=
=0A=
Section "Monitor"=0A=
Identifier "Generic Monitor"=0A=
HorizSync 30-70=0A=
VertRefresh 50-160=0A=
Option "DPMS"=0A=
EndSection=0A=
=0A=
Section "Screen"=0A=
Identifier "Default Screen"=0A=
Device "Generic Video Card"=0A=
Monitor "Generic Monitor"=0A=
DefaultDepth 24=0A=
DefaultFbBpp 32=0A=
SubSection "Display"=0A=
Depth 24 # 8 or 24=0A=
Modes "1280x1024" # "1024x768" or "1280x1024"=0A=
EndSubSection=0A=
EndSection=0A=
=0A=
Section "ServerLayout"=0A=
Identifier "Default Layout"=0A=
Screen "Default Screen"=0A=
InputDevice "Keyboard"=0A=
InputDevice "Mouse"=0A=
EndSection=0A=
=0A=
Section "DRI"=0A=
Mode 0666=0A=
EndSection=0A=
------=_NextPart_000_001B_01C274B3.1E20A8A0--