[parisc-linux] shiny new rp2430 (A400) won't boot :-(
Duraid Madina
Duraid@unsw.edu.au
Wed, 10 Apr 2002 14:53:32 +1000 (EST)
--%--multipart-mixed-boundary-1.4418.1018414412--%
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi all,
My nice new rp2430 (looks like an A400, but has a PA-8700 at 650MHz
inside, not sure if this is the only difference..) arrived this morning. I
hooked up an external (Sun) SCSI CDROM drive, an internal Fujitsu SCA-2
disk, and an RS232 console (well, FreeBSD 486 machine ;)
Unfortunately, it doesn't boot! The kernel seems to load okay and
probe around a bit, but as soon as it gets into the midst of SCSI things,
the box either locks (I've only seen this happen once) or, generates a
(firmware, I presume) 'SYSTEM ALERT' message, which doesn't mean a whole lot
to me.
For the record, as soon as I power on this system, the 'Attention'
and 'Fault' lights flash, but I have no idea if this is normal, or if not,
why they're flashing.
A transcript of the boot session is attached. I hope someone can
help me out here!
Many thanks in advance,
Duraid
--%--multipart-mixed-boundary-1.4418.1018414412--%
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Content-Description: C program text
Content-Disposition: attachment; filename="bootlog.txt"
/* this is the bootlog of an HP rp2430 (HP part #A6889A) attempting to boot
linux (pa-linux 0.9.3) from an external CDROM drive. As you'll see, it fails
right about where I'd expect SCSI devices to be probed. Hmmm.
This system is 'out of the box', apart from the external CDROM drive (an old
Sun one) and the internal Fujitsu SCA disk which were added.
If you can help or have any idea what's going on, please let me know,
I'm duraid@unsw.edu.au - thanks! */
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dallas# cu -s 9600 -l /dev/cuaa0
Connected.
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error
detected.
Check Chassis and Console Logs for error messages.
platform config 626F
processor test 1142
processor test 1100
processor test 1100
processor test 1100
processor test 1100
processor test 1100
PDH config 322F
PDH test 3149
PDH test 3160
platform test 616A
processor test 1146
processor INIT 1701
processor test 1110
processor test 1111
processor test 1112
processor test 1113
processor test 1114
processor test 1115
processor test 1116
processor test 1117
processor test 1118
processor test 1119
processor test 111A
processor test 111B
processor test 111C
processor test 111D
processor cache test 2111
processor cache test 2112
processor cache test 2113
processor cache test 2121
processor cache test 2122
processor cache test 2122
processor test 1151
processor INIT 1701
processor test 1110
processor test 1142
processor test 1142
PDH test 3158
PDH test 3157
PDH test 316E
PDH test 316E
PDH test 316E
memory config 7210
memory INIT 7702
memory INIT 771D
memory test 7150
memory config 7213
memory config 7213
memory config 7214
memory config 7213
memory config 7213
memory config 7213
memory config 7213
memory config 7213
memory config 7213
memory config 7213
memory config 7213
memory config 7215
memory config 7216
memory config 72A0
memory test 71A1
memory test 71A2
memory test 71A4
memory test 71A5
memory test 71A6
memory test 71A3
memory test 71A4
memory test 71A4
memory test 71A5
memory test 71A5
memory test 71A6
memory test 71A6
memory config 7217
memory config 7218
memory config 72A0
memory test 71A1
memory test 71A2
memory test 71A4
memory test 71A5
memory test 71A6
memory test 71A3
memory test 71A4
memory test 71A4
memory test 71A5
memory test 71A5
memory test 71A6
memory test 71A6
memory config 7210
I/O INIT 8701
I/O test 8118
I/O test 8118
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
memory config 7240
memory INIT 7702
memory config 7241
memory config 7243
memory config 72A0
memory test 71A1
memory test 71A2
memory test 71A4
memory test 71A5
memory test 71A6
memory test 71A3
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A6
memory test 71A6
memory test 71A6
memory INIT 7745
memory config 7240
I/O config 8204
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O config 8204
processor test 1120
processor test 1133
processor test 1134
processor test 1135
processor test 1136
processor test 1137
processor test 1138
processor test 1152
processor test 1139
processor test 113A
processor test 113B
processor test 113C
processor test 113D
processor test 113E
processor INIT 1701
processor test 1120
processor test 1142
processor test 113B
platform test 612A
I/O config 8238
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
Firmware Version 42.00
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2001, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor State Cache Size
Number State Inst
Data
--------- -------- --------------------- -----------------
------------
0 650 MHz Active Functional 750 KB 1.5
MB
Central Bus Speed (in MHz) : 120
Available Memory : 131072 KB
Good Memory Required : 25820 KB
Primary boot path: 0/0/1/1.15
Alternate boot path: 0/0/2/1.15
Console path: 0/0/4/1.643
Keyboard path: 0/0/4/1.0
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
---- Main Menu
---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu > IN
---- Information Menu
--------------------------------------------------------
Command Description
------- -----------
ALL Display all system information
BootINfo Display boot-related information
CAche Display cache information
ChipRevisions Display revisions of major VLSI
COprocessor Display coprocessor information
FRU Display FRU information
FwrVersion Display firmware version
IO Display I/O interface information
LanAddress Display Core LAN station address
MEmory Display memory information
PRocessor Display processor information
WArnings Display selftest warning messages
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<command>] Display help for specified command
RESET Restart the system
MAin Return to Main Menu
----
Information Menu: Enter command > ALL
Model: hp server rp2430 (model string 9000/800/A400-6X)
PROCESSOR INFORMATION
HVERSION SVERSION Processor
Processor Speed Model Model/Op CVERSION State
--------- -------- -------- -------- -------- -------------
0 650 MHz 0x05e1 0x0491 2. 3 Active
Central Bus Speed (in MHz) : 120
Software ID (dec) : 859917860
Software ID (hex) : 0x33414e24
Software Capability : 0x01f0
COPROCESSOR INFORMATION
Coprocessor Coprocessor Coprocessor
Processor Model Revision State
----------- ----------- ----------- -----------------
0 0x00000013 1 Functional
CACHE INFORMATION
Processor Instruction Cache Size Data Cache Size
----------- ----------------------- ---------------
0 750 KB 1.5 MB
MEMORY INFORMATION
MEMORY STATUS TABLE (MB) (Current Boot Status)
Slot 01 128M Active
Slot 02 -
Slot 03 -
Slot 04 -
Slot 05 -
Slot 06 -
Slot 07 -
Slot 08 -
Subtotal 128M
TOTAL = 128 MB
---------
Memory Installation Guidelines
------------------------------
- DIMMs must be loaded in ascending slot order: 1, 2, 3, 4, 5, 6, 7, 8
Active, Installed Memory : 128 MB of SDRAM
Deallocated Pages : 0 Pages
-----------
Available Memory : 128 MB
Good Memory Required by OS : 26 MB
Memory
HVERSION SVERSION
-------- ----------
0x09b0 0x00000900
I/O MODULE INFORMATION
Path Slot IODC
Type (dec) Number HVERSION SVERSION Vers
---- ----- ------ -------- -------- ----
System bus adapter 0 0x5820 0xb10 0x0
Local bus adapter 0/0 4 0x7820 0xa00 0x0
Local bus adapter 0/2 1 0x7820 0xa00 0x0
Local bus adapter 0/4 2 0x7820 0xa00 0x0
Local bus adapter 0/6 3 0x7820 0xa00 0x0
PCI DEVICE INFORMATION
Path Vendor Device Bus Slot
Description (dec) Id Id # #
----------- ----- ---- ---- --- ---
Ethernet cntlr 0/0/0/0 0x1011 0x19 0
Built_In
SCSI bus cntlr 0/0/1/0 0x1000 0xb 0
Built_In
SCSI bus cntlr 0/0/1/1 0x1000 0xb 0
Built_In
SCSI bus cntlr 0/0/2/0 0x1000 0xf 0
Built_In
SCSI bus cntlr 0/0/2/1 0x1000 0xf 0
Built_In
System peripheral 0/0/4/0 0x103c 0x128d 0
Built_In
Comp. ser cntlr 0/0/4/1 0x103c 0x1048 0
Built_In
System peripheral 0/0/4/2 0x0 0x0 0
Built_In
BOOT INFORMATION
Processor Boot ID
--------- -------
0 1
Autoboot: ON
Autosearch: ON
Autostart: ON
Fastboot: OFF
Primary boot path: intscsia.15
0/0/1/1.15
0/0/01/01.f (hex)
Alternate boot path: intscsib.15
0/0/2/1.15
0/0/02/01.f (hex)
Console path: 0/0/4/1.643
0/0/04/01.283 (hex)
Keyboard path: 0/0/4/1.0
0/0/04/01.0 (hex)
LAN Station Address: 00306e-2601de
Wed Apr 10 04:29:21 GMT 2002 (20:02:04:10:04:29:21)
FIRMWARE INFORMATION
Firmware Version: 42.09
Module Revision
------ --------
System Board A24210
PA 8700 CPU Module 2.3
FRU INFORMATION
FRU Name: HAR_SYS_BD
Part Number: A6889-60001
Serial Number: 40CC0GR0HG
Physical Location: 00ffff0001ffff69
Engineering Date Code: 4210
Art Work Revision: A2
Scan Revision:
FRU Specific Info:
FRU Name: CRE_PCI_BD
Part Number: A5570-60003
Serial Number: 40CC0ETRAT
Physical Location: 00ffff0002ffff69
Engineering Date Code: 4026
Art Work Revision: A3
Scan Revision:
FRU Specific Info:
FRU Name: HAR_GSP_BD
Part Number: A6889-60002
Serial Number: 40CC0GS0TC
Physical Location: 000000ffff06ff85
Engineering Date Code: 4204
Art Work Revision: A2
Scan Revision:
FRU Specific Info:
FRU Name: DIMM_128
Part Number: A5572-60001
Serial Number: A56E03388166
Physical Location: 0000ff000001ff74
Engineering Date Code: 4123
Art Work Revision: A4
Scan Revision:
FRU Specific Info:
Information Menu: Enter command > MA
---- Main Menu
---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu > SEA
Searching for potential boot device(s)
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path# Device Path (dec) Device Path (mnem) Device Type
----- ----------------- ------------------ -----------
P0 0/0/1/1.15 intscsia.15 Random access media
P1 0/0/2/0.6 extscsib.6 Random access media
Main Menu: Enter command or menu > BO P1
Interact with IPL (Y, N, or Cancel)?> Y
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl 0.96 root@palinux Fri Nov 2 16:31:18 MST 2001
Boot image contains:
0/vmlinux32 3122078 bytes @ 0x4cf000
0/vmlinux64 3990942 bytes @ 0x7c9800
0/ramdisk 1946807 bytes @ 0xb98000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Current command line:
0/vmlinux root=/dev/ram initrd=0/ramdisk console=ttyS0 TERM=vt102
0: 0/vmlinux
1: root=/dev/ram
2: initrd=0/ramdisk
3: console=ttyS0
4: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? b
Command line for kernel: 'root=/dev/ram console=ttyS0 TERM=vt102'
Selected kernel: /vmlinux from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing
64-bit kernel
ELF64 executable
Entry 00100000 first 00100000 n 4
Segment 0 load 00100000 size 2063232 mediaptr 0x1000
Segment 1 load 002f8000 size 1099104 mediaptr 0x1f9000
Segment 2 load 00408000 size 16384 mediaptr 0x306000
Segment 3 load 00410000 size 32768 mediaptr 0x30a000
Loading ramdisk 1946807 bytes @ 07e14000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.4.9-64 (root@paer) (gcc version 3.0) #1 Fri Nov 30 20:18:56
MST 2001
FP[0] enabled: Rev 1 Model 19
The 64-bit Kernel has started...
Determining PDC firmware type: 64 bit PAT.
model 00005e10 00000491 00000000 00000001 33414e24 100000f0 00000008
000000b2 000000b2
vers 00000203
cpuid 00000268
CPUID vers 19 rev 8
model 9000/800/A400-6X
Total Memory: 128 Mb
initrd: 17e14000-17fef4b7
initrd: reserving 07e14000-07fef4b7 (mem_max 08000000)
pagetable_init
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram console=ttyS0 TERM=vt102
Console: colour dummy device 160x64
Calibrating delay loop... 1297.61 BogoMIPS
Memory: 121328k available
Dentry-cache hash table entries: 16384 (order: 6, 262144 bytes)
Inode-cache hash table entries: 8192 (order: 5, 131072 bytes)
Mount-cache hash table entries: 2048 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 4096 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 6, 262144 bytes)
Searching for devices...
Found devices:
1. unknown device (0) at 0xfffffffffffa0000 [-96], versions 0x5e1, 0x0, 0x4
2. Astro BC Runway Port (12) at 0xfffffffffed00000 [0], versions 0x582, 0x0,
0xb
3. Elroy PCI Bridge (13) at 0xfffffffffed30000 [0/0], versions 0x782, 0x0,
0xa
4. Elroy PCI Bridge (13) at 0xfffffffffed34000 [0/2], versions 0x782, 0x0,
0xa
5. Elroy PCI Bridge (13) at 0xfffffffffed38000 [0/4], versions 0x782, 0x0,
0xa
6. Elroy PCI Bridge (13) at 0xfffffffffed3c000 [0/6], versions 0x782, 0x0,
0xa
7. Crescendo Memory (1) at 0xfffffffffed08000 [8], versions 0x9b, 0x0, 0x9
CPU(s): 1 x PA8600 (PCX-W+) at 650.000000 MHz
SBA found Astro 2.1 at 0xfffffffffed00000
lba version TR4.0 (0x5) found at 0xfffffffffed30000
lba range[2] : ignoring GMMIO (0xfffffff804000000)
got res[100:1ff] for resource 0 of Symbios Logic Inc. (formerly NCR)
53c896
got res[200:2ff] for resource 0 of Symbios Logic Inc. (formerly NCR)
53c896 (#2)
got res[300:3ff] for resource 0 of Symbios Logic Inc. (formerly NCR)
53c875
got res[400:4ff] for resource 0 of Symbios Logic Inc. (formerly NCR)
53c875 (#2)
got res[80:ff] for resource 0 of Digital Equipment Corporation DECchip
21142/43
got res[40:7f] for resource 1 of PCI device 103c:1048 (Hewlett-Packard
Company)
got res[fffffffff8080000:fffffffff80bffff] for resource 6 of Digital
Equipment Corporation DECchip 21142/43
got res[fffffffff8002000:fffffffff8003fff] for resource 3 of Symbios Logic
Inc. (formerly NCR) 53c896
got res[fffffffff8004000:fffffffff8005fff] for resource 3 of Symbios Logic
Inc. (formerly NCR) 53c896 (#2)
got res[fffffffff8001000:fffffffff8001fff] for resource 2 of Symbios Logic
Inc. (formerly NCR) 53c875 (#2)
got res[fffffffff8006000:fffffffff80063ff] for resource 1 of Digital
Equipment Corporation DECchip 21142/43
got res[fffffffff8007000:fffffffff80073ff] for resource 1 of Symbios Logic
Inc. (formerly NCR) 53c896
got res[fffffffff8008000:fffffffff80083ff] for resource 1 of Symbios Logic
Inc. (formerly NCR) 53c896 (#2)
got res[fffffffff8009000:fffffffff80090ff] for resource 1 of Symbios Logic
Inc. (formerly NCR) 53c875 (#2)
lba version TR4.0 (0x5) found at 0xfffffffffed34000
lba range[2] : ignoring GMMIO (0xfffffff904000000)
lba version TR4.0 (0x5) found at 0xfffffffffed38000
lba range[2] : ignoring GMMIO (0xfffffffa04000000)
lba version TR4.0 (0x5) found at 0xfffffffffed3c000
lba range[2] : ignoring GMMIO (0xfffffffb04000000)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Performance monitoring counters enabled for unknown device
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (4156,4168,4156,4171)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
ttyS00 at port 0x0040 (irq = 132) is a 16550A
request_module[parport_lowlevel]: Root fs not mounted
lp: driver loaded but no devices found
Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com)
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
loop: loaded (max 8 devices)
Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)
tulip0: no phy info, aborting mtable build
tulip0: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at 0x80, 00:30:6E:26:01:DE, IRQ 128.
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 2, function 0
sym53c8xx: 53c875 detected
sym53c8xx: at PCI bus 0, device 2, function 1
sym53c8xx: 53c875 detected
sym53c8xx: at PCI bus 0, device 1, function 0
sym53c8xx: setting PCI_COMMAND_INVALIDATE (fix-up)
sym53c8xx: 53c896 detected
sym53c8xx: at PCI bus 0, device 1, function 1
sym53c8xx: setting PCI_COMMAND_INVALIDATE (fix-up)
sym53c8xx: 53c896 detected
sym53c875-0: rev 0x37 on pci bus 0 device 2 function 0 irq 130
sym53c875-0: ID 7, Fast-20, Parity Checking
************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized
DATE: 04/10/2002 TIME: 04:31:41
ALERT LEVEL: 7 = reserved
REASON FOR ALERT
SOURCE: 0 = unknown, no source stated
SOURCE DETAIL: 0 = unknown, no source stated SOURCE ID: FF
PROBLEM DETAIL: 0 = no problem detail
LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error
detected.
Check Chassis and Console Logs for error messages.
0x0000007000FF6292 000000F0 F0000000 - type 0 = Data Field Unused
0x5800087000FF6292 00006603 0A041F29 - type 11 = Timestamp 04/10/2002
04:31:41
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:A
*****************************************
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
P.S. I believe that *once* (assuming I wasn't dreaming) the above firmware
'SYSTEM ALERT' message didn't appear - instead, Linux, having gotten to the
same point (sym53c875...) simply hung. I made a point of waiting quite some
time (thinking perhaps the hard drive was taking its sweet time powering up)
so I'm pretty sure it really was 'hung.'
P.P.S. When I turn my system on, the 'Power' and 'Remote' LEDs glow solid,
but the 'Run', 'Attention' and 'Fault' lights also flash, until the 'SYSTEM
ALERT' appears, at which point the 'Run' light goes dark. Any ideas?
--%--multipart-mixed-boundary-1.4418.1018414412--%--