[parisc-linux] 2.4.14 and ISA-NE2000 StackDump

[Pedot, Wolfgang]

Well, you=B4ve got a 64Bit-Kernel and i run a 32bit Kernel on my =
715/75.

I just tested with 2.4.4-pa7 and got the same effect...

greetings
Wolfgang

> -----Original Message-----
> From:	Helge Deller [SMTP:deller@gmx.de]
> Sent:	Monday, November 19, 2001 7:52 PM
> To:	Pedot, Wolfgang; 'Parisc Linux Mailinglist'
> Subject:	Re: [parisc-linux] 2.4.14 and ISA-NE2000 StackDump
>=20
> Hi Wolfgang,
>=20
> I've no problems here with my ISA NE2000 and kernel 2.4.14-pa7:
>=20
> NE*000 ethercard probe at 0x340: 08 00 00 50 11 13
> eth0: NE2000 found at 0x340, using IRQ 10.
>=20
> pa64:~# uname -a
> Linux pa64 2.4.14-pa7 #2 Mon Nov 19 19:43:37 CET 2001 parisc unknown
>=20
> pa64:~# cat /proc/interrupts
>  IRQ      count         Region    ISR
>  10:       2346            EISA  NE2000
>=20
> Sadly I've no idea why it doesn't work for you...
>=20
> Greetings,
> Helge
>=20
> On Monday 19 November 2001 15:16, Pedot, Wolfgang wrote:
> > Hi,
> >
> > I just tried to update to 2.4.14-pa6 and noticed a stackdump during
> > initialisation of my old NE2000 ISA-Nic which works fine using the =
last
> > 2.4.9 Kernel. After this stackdump i booted (reset used) 2.4.9 =
again and
> > the machine hung without any message druring initialistaion of the =
NE2000
> > (right after "NE*000 ethercard probe at 0x300:"). I had to =
power-cycle the
> > machine to make it work again.
> >
> > Heres the log-message:
> >
> > Last modified Nov 1, 2000 by Paul Gortmaker
> > NE*000 ethercard probe at 0x300:WARNING! Stack pointer and cr30 do =
not
> > correspond!
> >
> > Bad Address (null pointer deref?): Code=3D6 regs=3D100fe380 =
(Addr=3D50412d43)
> >
> > any hints?
> > Are there any guys arround here which made their ne2000 work with =
2.4.14?
> > greetings
> >
> > Wolfgang Pedot
>=20
>=20
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux