[parisc-linux] PA-Linux 0.6.1 on HP 9000 710, kernel canīt find the cd-rom
Jim Buttafuoco
jim@buttafuoco.org
Fri, 18 May 2001 15:17:20 -0400
Jan,
Currently the 710 is not supported. There seems to be a problem with
the interrupt controller. (Correct me if I am wrong.) I try to get my
710 to boot every week or so and NO go. You can get a complete history
of my problems via the mail archives
Jim
> Hi,
>
> ich habe auf mehreren HP 9000 710 50MHz die 0.6.1 PA-RISC ISO
getestet.
> Jedesmal kann das CD-Laufwerk vom Kernel nicht gefunden werden. Ist
dies
> noch ein Bug im NCR53c7xx LASI Treiber bzw. ist es bereits behoben?
>
> I have just tested the 0.6.1 PA-RISC ISO on several HP 9000 710 with
50
> MHZ. The Kernel is always unable to find the CD-Rom. Is this a bug
> within the NCR53c7xx, or am I missing something? Is there a patch/fix?
>
> Here is a copy of the boot log:
>
> Hier das Boot-Log:
>
> (c) Copyright. Hewlett-Packard Company. 1991.
> All rights reserved.
>
> PDC ROM rev. 2.0
> IODC ROM rev. 2.0
> 64 MB of memory configured and tested.
>
>
> Selecting a system to boot.
> To stop selection process, press and hold the ESCAPE key.
>
> Selection process stopped.
>
> Searching for Potential Boot Devices.
> To terminate search, press and hold the ESCAPE key.
>
> Search terminated.
>
>
>
> b) Boot from specified device
> s) Search for bootable devices
> a) Enter Boot Administration mode
> x) Exit and continue boot sequence
> ?) Help
>
> Select from menu: a
> BOOT_ADMIN> info
> ----------------------------- Hardware Configuration
> ------------------------
>
> Machine model: 9000/710
>
> Processor Frequency = 50000000 Hz
> I/O Subsystem Frequency = 25000000 Hz
>
> LAN Jumper Status: External AUI Port selected
>
> Processor Revision = 3
> System Controller Revision = 0
> Floating Point Coprocessor Revision = 3
>
> Hardware Version 12288 (0x00003000)
> Software Version 1153 (0x00000481)
>
> BOOT_ADMIN> boot scsi.4.0
>
> Trying scsi.4.0
> Boot path initialized.
> Attempting to load IPL.
>
> Hard booted.
> palo ipl debackex@pc5158a Wed Apr 11 17:56:43 CEST 2001
> 0/vmlinux 2619890 bytes @ 0x4fc000
> 0/palo-cmdline '0/vmlinux ROOT=/ TERM=linux root=/dev/scd0
console=ttyS0
> ramdisk=8192'
> Kernel: partition 0 file /vmlinux
> ELF32 executable
> Entry 00100000 first 00100000 n 5
> Segment 0 load 00100000 size 1530128 mediaptr 0x1000
> Segment 1 load 00276000 size 182408 mediaptr 0x177000
> Segment 2 load 002a4000 size 212996 mediaptr 0x1a4000
> Segment 3 load 002dc000 size 8192 mediaptr 0x1d9000
> Segment 4 load 00323a48 size 75904 mediaptr 0x1dba48
> branching to kernel entry point 0x00100000
> PDC Console Initialized
> Linux version 2.4.0 (debackex@pc5158a) (gcc version 2.97 20010203
> (experimental)) #6 Mon May 14 14:37:01 CEST 2001
> FP[0] enabled: Rev 3 Model 0
> The 32-bit Kernel has started...
> Determining PDC firmware type: Older Legacy Box
> setup_cmdline(0x64d58,0x64d58,0x0,0x0)
> PALO command line: 'ROOT=/ TERM=linux root=/dev/scd0 console=ttyS0
> ramdisk=8192'
> PALO initrd 0-0
> model 00003000 00000481 00000000 00000000 00000000 00000000 00000004
> 0000000d 00000000
> vers 00000003
> CPUID vers 0 rev 0
> model 9000/710
> Total Memory: 64 Mb
> initrd: 00000000-00000000
> pagetable_init
> On node 0 totalpages: 16384
> zone(0): 16384 pages.
> zone(1): 0 pages.
> zone(2): 0 pages.
> Searching for devices...
> Found devices:
> 1. Stinger Optional Graphics (10) at 0xf4000000, versions 0x6, 0x0,
> 0x77, 0x0, 0x0
> 2. Bushmaster Core BA (11) at 0xf082f000, versions 0x6, 0x0, 0x70,
0x0,
> 0x0
> 3. Bushmaster Core SCSI (10) at 0xf0825000, versions 0x6, 0x0, 0x71,
> 0x0, 0x0
> 4. Bushmaster Core LAN (802.3) (10) at 0xf0826000, versions 0x6, 0x0,
> 0x72, 0x0, 0x0
> 5. Bushmaster Core HIL (10) at 0xf0821000, versions 0x6, 0x0, 0x73,
0x0,
> 0x0
> 6. Bushmaster Core RS-232 (10) at 0xf0823000, versions 0x6, 0x0, 0x75,
> 0x0, 0x0
> 7. Bushmaster Core RS-232 (10) at 0xf0822000, versions 0x6, 0x0, 0x75,
> 0x0, 0x0
> 8. Bushmaster Core Centronics (10) at 0xf0824000, versions 0x6, 0x0,
> 0x74, 0x0, 0x0
> 9. Bushmaster Audio (10) at 0xf1000000, versions 0x6, 0x0, 0x7a, 0x0,
> 0x0
> 10. Bushmaster (710) (0) at 0xfffbe000, versions 0x300, 0x0, 0x4, 0x0,
> 0x81
> 11. Bushmaster (1) at 0xfffbf000, versions 0x16, 0x0, 0x9, 0x0, 0x0
> That's a total of 11 devices.
> CPU(s): 1 x PA7000 (PCX-S) at 50.000000 MHz
> Kernel command line: ROOT=/ TERM=linux root=/dev/scd0 console=ttyS0
> ramdisk=8192
> Error reading tod clock
> Calibrating delay loop... 49.76 BogoMIPS
> Memory: 62044k available
> Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
> Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
> POSIX conformance testing by UNIFIX
> ASP version 1 at 0xf0800000 found.
> LED (ASP-style) display at f0800020 registered
> Found HIL at 0xf0821000, IRQ 94
> HIL: timed out, assuming no keyboard present.
> Warning : device (10, 0x6, 0x0, 0x73, 0x0) NOT claimed by HIL 712, 715
> or similiar
> Found i82596 at 0xf0826000, IRQ 87
> early initialization of device eth0 is deferred
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Starting kswapd v1.8
> pty: 256 Unix98 ptys configured
> lp: driver loaded but no devices found
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> 82596.c: MAC of HP700 LAN blindely read from the prom!
> eth0: Couldn't get consistent shared memory
> eth0: 82596 at 0xf0826000, 08 00 09 8C CD 84 IRQ 87.
> 82596.c $Revision: 1.17 $
> Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI enabled
> ttyS00 at iomem 0xf0823800 (irq = 90) is a 16550A
> ttyS01 at iomem 0xf0822800 (irq = 89) is a 16550A
> Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com)
> parport_init_chip: enhanced parport-modes not supported.
> parport0: PC-style at 0xf0824800, irq 88 [PCSPP]
> lp0: using parport0 (interrupt-driven).
> SCSI subsystem driver Revision: 1.00
> sim700: Couldn't get consistent shared memory
> sim700: Configuring 53c700 (SCSI-ID 7) at f0825100, IRQ 86, options 1
> scsi0: Revision 0x0
> Post test1, istat 05, sstat0 00, dstat 84
> sim700: WARNING IRQ probe failed, (returned 0)
> scsi0: WARNING: target data areas are not dma coherent!
> scsi0: test 1 completed ok.
> scsi0 : LASI/Simple 53c7xx
> scsi0: Unable to abort command for target 0
> scsi0: Unable to send Bus Device Reset for target 0
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: could not halt NCR chip, stage 0
> scsi0: Unable to abort command for target 1
> scsi0: Unable to send Bus Device Reset for target 1
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: could not halt NCR chip, stage 0
> scsi0: Unable to abort command for target 2
> scsi0: Unable to send Bus Device Reset for target 2
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: could not halt NCR chip, stage 0
> scsi0: Unable to abort command for target 3
> scsi0: Unable to send Bus Device Reset for target 3
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: could not halt NCR chip, stage 0
> scsi0: Unable to abort command for target 4
> scsi0: Unable to send Bus Device Reset for target 4
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: could not halt NCR chip, stage 0
> scsi0: Unable to abort command for target 5
> scsi0: Unable to send Bus Device Reset for target 5
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: could not halt NCR chip, stage 0
> scsi0: Unable to abort command for target 6
> scsi0: Unable to send Bus Device Reset for target 6
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: could not halt NCR chip, stage 0
> linear personality registered
> raid0 personality registered
> raid1 personality registered
> raid5 personality registered
> raid5: measuring checksumming speed
> 8regs : 34.671 MB/sec
> 8regs_prefetch : 40.767 MB/sec
> 32regs : 32.004 MB/sec
> 32regs_prefetch: 41.148 MB/sec
> raid5: using function: 32regs_prefetch (41.148 MB/sec)
> md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md.c: sizeof(mdp_super_t) = 4096
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 4096 bind 4096)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> VFS: Cannot open root device "scd0" or 0b:00
> Please append a correct "root=" boot option
> Kernel panic: VFS: Unable to mount root fs on 0b:00
>
>
>
> --
> Jan Heumann
>
> .~.
> /V\
> /( : )\
> ^^ ^^
>
>
>
>
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
>
>