[parisc-linux] Failed boot on D310
djweis@sjdjweis.com
djweis@sjdjweis.com
Sun, 3 Jun 2001 17:44:33 -0500 (CDT)
On Sun, 3 Jun 2001, Richard Hirst wrote:
> On Sun, Jun 03, 2001 at 12:41:46PM -0500, djweis@sjdjweis.com wrote:
> > On Sun, 3 Jun 2001, Richard Hirst wrote:
> > > On Sun, Jun 03, 2001 at 08:33:23AM -0500, djweis@sjdjweis.com wrote:
> > > > I've got a D310 with a 100mhz processor and 128 megs of RAM. I trie=
d to
> > > > boot the ISO version 0.9 last night, but it crashed on boot. I can =
get the
> > > > exact error messages, it looked like a register dump.=20
> > > >=20
> Ah, I'd assumed it got as far as starting the kernel and then the
> kernel crashed. In this case I think it has failed reading the
> CD. Can you read the CD on some other system to check it burned
> ok? Are you confident that the CD drive is P5 and is working?
Okay, I managed to get bootp and tftp set up enough to get an image over
the wire. It did get into the kernel after a while and here are the boot
messages:
Main Menu: Enter command > boot lan =
Interact with IPL (Y or N)?> n =
=
Booting... =
Network Station Address 080009-ae8800 =
=
Boot IO Dependent Code (IODC) revision 2 =
=
=
HARD Booted. =
palo ipl bame@palinux Fri=
May 11 16:10:29 MDT 2001 0/vmlinux 2622963 by=
tes @ 0x6800 0/palo-cmdline =
'0/vmlinux HOME=3D/ TERM=3Dlinux root=3D/dev/ram initrd=3D0/ramdisk cons'0/=
ramdisk 1678201 bytes @ 0x286df3 =
Kernel: partition 0 file /vmlinux =
Ramdisk: partition 0 file /ramdisk =
ELF32 executable =
Entry 00100000 first 00100000 n 4 =
Segment 0 load 00100000 size 1469948 mediaptr 0x1000=
Segment 1 load 00268000 size 192312 mediaptr 0x=
168000 Segment 2 load 00298000 size 221184 mediap=
tr 0x197000 Segment 3 load 002fa7c8 size 73264 me=
diaptr 0x1cd7c8 Loading ramdisk 1678201 bytes @ =
07e55000... branching to kernel entry p=
oint 0x00100000 Set default PSW W bit =
to 0 PDC Console Initi=
alized Linux versio=
n 2.4.0-pa10 (root@slab) (gcc version 3.0 20010315 (prerelease)) #11FP[0] e=
nabled: Rev 1 Model 13 Th=
e 32-bit Kernel has started... =
=20
Determining PDC firmware type: Newer Box =
setup_cmdline(0x64cc4,0x64cc4,0x7e55000,0x7feeb79) =
PALO command line: 'HOME=3D/ TERM=3Dlinux root=3D/dev/ram console=
=3DttyS0' PALO initrd 7e55000-7feeb79 =
model 00004840 00000481 00000000 00000000 773=
61cea 100000f0 00000004 000000722vers 0000000c =
CPUID vers 0 rev 0 =
model 9000/811/D310 =
Total Memory: 128 Mb =
initrd: 17e55000-17fee=
b79 pagetable_init =
On node 0 to=
talpages: 32768 zone(0)=
: 32768 pages. zo=
ne(1): 0 pages. =
zone(2): 0 pages. =
Searching for devices... =
Found devices: =
1. UL 550 Lasi Core BA (11) at 0xf0100000, versions 0x2f,=
0x0, 0x81, 0x0, 0x0, 2. UL 550 Core SCSI (10) at 0xf0106000, versions 0x2=
f, 0x0, 0x82, 0x0, 0x0 3. UL 350 Core LAN (802.3) (10) at 0xf0107000, =
versions 0x2f, 0x0, 0x8a, 0x0, 004. UL 550 Core Centronics (10) at 0xf01020=
00, versions 0x2f, 0x0, 0x74, 0x0, 0x 5. UL 550 Core PC Keyboard (10) at 0x=
f0108000, versions 0x2f, 0x0, 0x84, 0x0, 006. UL 550 Core PC Keyboard (10) =
at 0xf0108100, versions 0x2f, 0x0, 0x84, 0x0, 007. UL 550 Core Wax BA (11) =
at 0xffe00000, versions 0x31, 0x0, 0x8e, 0x0, 0x0 8. UL 550 Wax Core RS-=
232 (10) at 0xffe02000, versions 0x31, 0x0, 0x8c, 0x0, 0x09. UL 550 Wax EIS=
A BA (11) at 0xfc000000, versions 0x31, 0x0, 0x90, 0x0, 0x0, 10. Gecko BO=
A BC GSC+ Port (7) at 0xfff80000, versions 0x500, 0x0, 0xc, 0x0, 0x011. Blu=
efish Add-on FW-SCSI (4) at 0xfff84000, versions 0x13, 0x1, 0x89, 0x0, 0012=
=2E Unknown device (0) at 0xfffbe000, versions 0x484, 0x0, 0x4, 0x0, 0x81 =
13. UL Proc L 100 (1) at 0xfffbf000, versions 0x57, 0x0, 0x9, 0x0, 0x0=
That's a total of 13 devices. =
CPU(s): 1 x PA7100LC (PCX-L) at 100.000000 MHz =
Kernel command line: HOME=3D/ TERM=3Dlinux root=3D/dev/=
ram console=3DttyS0 Calibrating delay loop... 99.73 BogoMIPS =
Memory: 125076k available =
Dentry-cache hash table entries:=
16384 (order: 5, 131072 bytes) Buffer-cache hash table ent=
ries: 4096 (order: 2, 16384 bytes) Page-cache hash table =
entries: 32768 (order: 5, 131072 bytes) Inode-cache hash =
table entries: 8192 (order: 4, 65536 bytes) POSIX confor=
mance testing by UNIFIX Lasi ve=
rsion 0 at 0xf0100000 found. Wa=
x at 0xffe00000 found. =
Wax: HIL Keyboard-NMI registered. =
Wax EISA bus adapter version 0x5761 at 0xffe00000 =
Initializing Lasi PS/2-keyboard port at 0xf0108000... =
Support for Lasi PS/2-psaux not yet available ! =
Found i82596 at 0xf0107000, IRQ 87 =
early initialization of device eth0 is deferred=
Linux NET4.0 for Linux 2.4 =
Based upon Swansea University Compute=
r Society NET3.039 Starting kswapd v1.8 =
pty: 25<4>Lasi PS/2 transmi=
t buffer timeout Lasi PS/2 transmit buf=
fer timeout PS/2 transmit bu=
ffer timrequest_module[parport_lowlevel]: Root fs not mounted lp: driver l=
oaded but no devices found RAMDISK=
driver initialized: 16 RAM disks of 4096K size 1024 blocksize et=
h0: 82596 at 0xf0107000, 08 00 09 AE 88 00 IRQ 87. =
82596.c $Revision: 1.18 $ =
RAMDISK: Compressed image found at block 0 =
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_=
IRQ SERIAL_PCI endttyS00 at iomem 0xffe02800 (irq =3D 121) is a 16550A =
=
=20
There doesn't seem to be linefeeds at the end of the line, I hope it
wraps correctly.
The mac address was read correctly. The ttyS00 line is the last thing to
be printed.
dave
--=20
Dave Weis "I believe there are more instances of the abridgemen=
t
djweis@sjdjweis.com of the freedom of the people by gradual and silent
encroachments of those in power than by violent=20
and sudden usurpations."- James Madison