[parisc-linux] Help wanted on an 715/50 "old Box" 2

Wed, 21 Feb 2001 00:36:35 +0100

The "nothing is happing" ... I know that. But there is something
happening,
but after a long time. On kernels of some days ago, I often have to wait
for
one minute or so, but suddenly the kernel starts printing the well-know
linux kernel style. So try to wait really some minutes....

Cheers
	Christoph P.

WIES Nicolas wrote:
> 
> Hello all,
> 
> First I want to congratulate you for this great job.
> 
> I have an old Apollo, a 715/50 Scorpio with 64Mb Ram and a Tulip in the EISA
> port and my goal is to turn it into a firewall.
> 
> So, since September, every week I upgrade all sources via CVS, and I make a
> kernel and I try to boot. I try via rbootd or from a hard disk, with STI or
> with serial console.
> 
> But I never have a commplete boot.
> 
> >From the beginnig of the year, I don't remenber exactly when, I have the same
> message with this last lines:
> 
> Entry 00100170 first 00100000 n 5
> 
> Segment 0 load 00100000 size 1453916 mediaptr 0x1000
> Segment 1 load 00264000 size 201128 mediaptr 0x164000
> Segment 2 load 00298000 size 214428 mediaptr 0x196000
> Segment 3 load 002d0000 size 8192 mediaptr 0x1cb000
> Segment 4 load 002fbda8 size 71328 mediaptr 0x1cdda8
> branching to kernel entry point 0x00100170
> 
> And nothing happen.
> 
> I don't understand where can be the problem because the kernel start to load,
> according to theses lines, and freeze.
> My configuration is the last nfs-root for booting over the lan, and the
> esiee's fs_hd_sti.tar.gz for booting from the hard disk.
> Both are configure for my lan.
> 
> Message for the esiee team : Can you add a date at your fs_hd_sti.tar.gz?
> Because we can't know how old is it.
> 
> With this message, you will find my .config
> 
> Thanks for the help,
> 
>          Nicolas
> 
> P.S: I remade it because the .config is in a bad format
> 
> .config :
> 
> #
> # Automatically generated by make menuconfig: don't edit
> #
> CONFIG_PARISC32=y
> CONFIG_PARISC=y
> # CONFIG_UID16 is not set
> 
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> 
> #
> # Loadable module support
> #
> # CONFIG_MODULES is not set
> 
> #
> # General options
> #
> # CONFIG_SMP is not set
> # CONFIG_KWDB is not set
> CONFIG_GSC=y
> CONFIG_IOMMU_CCIO=y
> CONFIG_GSC_LASI=y
> CONFIG_GSC_WAX=y
> CONFIG_PCI=y
> CONFIG_GSC_DINO=y
> CONFIG_PCI_LBA=y
> CONFIG_WAX_EISA=y
> # CONFIG_SUPERIO is not set
> CONFIG_IOSAPIC=y
> CONFIG_IOMMU_SBA=y
> CONFIG_PCI_NAMES=y
> CONFIG_CHASSIS_LCD_LED=y
> 
> #
> # General setup
> #
> CONFIG_HOTPLUG=y
> CONFIG_NET=y
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> CONFIG_KCORE_ELF=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_SOM=y
> # CONFIG_BINFMT_MISC is not set
> # CONFIG_PM is not set
> 
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> # CONFIG_PARPORT_PC is not set
> # CONFIG_PARPORT_AMIGA is not set
> # CONFIG_PARPORT_MFC3 is not set
> # CONFIG_PARPORT_ATARI is not set
> CONFIG_PARPORT_GSC=y
> # CONFIG_PARPORT_SUNBPP is not set
> # CONFIG_PARPORT_OTHER is not set
> # CONFIG_PARPORT_1284 is not set
> 
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_LOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> 
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
> # CONFIG_BLK_DEV_MD is not set
> # CONFIG_MD_LINEAR is not set
> # CONFIG_MD_RAID0 is not set
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID5 is not set
> # CONFIG_BLK_DEV_LVM is not set
> # CONFIG_LVM_PROC_FS is not set
> 
> #
> # Networking options
> #
> # CONFIG_PACKET is not set
> # CONFIG_NETLINK is not set
> # CONFIG_NETFILTER is not set
> # CONFIG_FILTER is not set
> CONFIG_UNIX=y
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_INET_ECN is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_IPV6 is not set
> # CONFIG_KHTTPD is not set
> # CONFIG_ATM is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_LLC is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
> 
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
> 
> #
> # SCSI support
> #
> CONFIG_SCSI=y
> CONFIG_BLK_DEV_SD=y
> CONFIG_SD_EXTRA_DEVS=40
> CONFIG_CHR_DEV_ST=y
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_SR_EXTRA_DEVS=2
> CONFIG_CHR_DEV_SG=y
> # CONFIG_SCSI_DEBUG_QUEUES is not set
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
> 
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AHA152X is not set
> # CONFIG_SCSI_AHA1542 is not set
> # CONFIG_SCSI_AHA1740 is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_DMA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> CONFIG_SCSI_LASI=y
> CONFIG_SCSI_ZALON=y
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_NCR53C7xx is not set
> # CONFIG_SCSI_NCR53C8XX is not set
> CONFIG_SCSI_SYM53C8XX=y
> CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
> CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
> CONFIG_SCSI_NCR53C8XX_SYNC=20
> # CONFIG_SCSI_NCR53C8XX_PROFILE is not set
> # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
> # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
> # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PCI2000 is not set
> # CONFIG_SCSI_PCI2220I is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_SIM710 is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_DEBUG is not set
> 
> #
> # PCMCIA SCSI adapter support
> #
> # CONFIG_SCSI_PCMCIA is not set
> 
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> 
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_NET_SB1000 is not set
> 
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_LASI_82596=y
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> # CONFIG_AT1700 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_APRICOT is not set
> # CONFIG_CS89x0 is not set
> CONFIG_TULIP=y
> # CONFIG_DE4X5 is not set
> # CONFIG_DGRS is not set
> # CONFIG_DM9102 is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_EEPRO100_PM is not set
> # CONFIG_LNE390 is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_NE3210 is not set
> # CONFIG_ES3210 is not set
> # CONFIG_8139TOO is not set
> # CONFIG_RTL8129 is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_WINBOND_840 is not set
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_NET_POCKET is not set
> 
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> 
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
> 
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
> 
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> 
> #
> # PCMCIA network device support
> #
> # CONFIG_NET_PCMCIA is not set
> 
> #
> # Input core support
> #
> # CONFIG_INPUT is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_GSC_PS2=y
> CONFIG_HIL=y
> CONFIG_SERIAL=y
> # CONFIG_SERIAL_CONSOLE is not set
> CONFIG_SERIAL_GSC=y
> # CONFIG_SERIAL_EXTENDED is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
> CONFIG_PRINTER=y
> # CONFIG_LP_CONSOLE is not set
> # CONFIG_PPDEV is not set
> 
> #
> # I2C support
> #
> # CONFIG_I2C is not set
> 
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_MOUSE is not set
> 
> #
> # Joysticks
> #
> # CONFIG_JOYSTICK is not set
> # CONFIG_QIC02_TAPE is not set
> 
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> CONFIG_GENRTC=y
> # CONFIG_INTEL_RNG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> 
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> # CONFIG_AGP is not set
> # CONFIG_DRM is not set
> CONFIG_PCMCIA_SERIAL=y
> 
> #
> # PCMCIA character device support
> #
> # CONFIG_PCMCIA_SERIAL_CS is not set
> 
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
> 
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_ADFS_FS is not set
> # CONFIG_ADFS_FS_RW is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_FAT_FS is not set
> # CONFIG_MSDOS_FS is not set
> # CONFIG_UMSDOS_FS is not set
> # CONFIG_VFAT_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_JFFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_RAMFS is not set
> CONFIG_ISO9660_FS=y
> # CONFIG_JOLIET is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_NTFS_FS is not set
> # CONFIG_NTFS_RW is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> # CONFIG_DEVFS_FS is not set
> # CONFIG_DEVFS_MOUNT is not set
> # CONFIG_DEVFS_DEBUG is not set
> # CONFIG_DEVPTS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_QNX4FS_RW is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_SYSV_FS is not set
> # CONFIG_SYSV_FS_WRITE is not set
> # CONFIG_UDF_FS is not set
> # CONFIG_UDF_RW is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_UFS_FS_WRITE is not set
> 
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> CONFIG_NFS_FS=y
> # CONFIG_NFS_V3 is not set
> # CONFIG_ROOT_NFS is not set
> # CONFIG_NFSD is not set
> # CONFIG_NFSD_V3 is not set
> CONFIG_SUNRPC=y
> CONFIG_LOCKD=y
> # CONFIG_SMB_FS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_NCPFS_PACKET_SIGNING is not set
> # CONFIG_NCPFS_IOCTL_LOCKING is not set
> # CONFIG_NCPFS_STRONG is not set
> # CONFIG_NCPFS_NFS_NS is not set
> # CONFIG_NCPFS_OS2_NS is not set
> # CONFIG_NCPFS_SMALLDOS is not set
> # CONFIG_NCPFS_NLS is not set
> # CONFIG_NCPFS_EXTRAS is not set
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> # CONFIG_SMB_NLS is not set
> # CONFIG_NLS is not set
> 
> #
> # Console drivers
> #
> 
> #
> # Frame-buffer support
> #
> # CONFIG_FB is not set
> CONFIG_STI_CONSOLE=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FBCON=y
> # CONFIG_FBCON_FONTWIDTH8_ONLY is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> CONFIG_FONT_6x11=y
> CONFIG_FONT_SUN12x22=y
> 
> #
> # Sound
> #
> # CONFIG_SOUND is not set
> 
> #
> # Kernel hacking
> #
> CONFIG_MAGIC_SYSRQ=y
> 
> --
> Adresse de r�ponse  / return address :
> 
>         n.wies@wanadoo.fr
> 
> :-)
> 
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux

-- 
-------------------------------------------------------------------------
private:	christoph.plattner@dot.at
company:	christoph.plattner@alcatel.at