[parisc-linux] 715/33 experience and one question

[Ulrich.Strelow@schering.de]

Here is my experience booting the kernel on a 715/33 using hpux:

ISL> hpux /stand/vmlinux

Boot
: disk(2/0/1.6.0.0.0.0.0;0)/stand/vmlinux
389128 + 98304 + 68064 start 0x12000


The Kernel has started...
You are running a 33MHz PA-RISC-Machine with 48MB of RAM.
Free memory was at 0x000AB100 (=stackbase, stacksize=0x00040000).
Free memory now at 0x000EB100 and ends at 0x03000000.
Linux version 2.2.1 (root@be5359) (gcc version 2.8.1) #2
 Fri Jul 16 10:17:36 METDST 1999
command_line: <none>

exponent = 1028 mantissa = 1092275 result = 33328125
processor       : 0
vendor_id       : Hewlett Packard (HP)
cpu family      : PA-RISC 1.1
revision        : 4
model           : 9000/715
model name      : Scorpio Jr.(715/33)
hversion        : 0x00003110
sversion        : 0x00000481
sw_id           : 2015972664
shadow registers: yes
cpu category    : category A
cpu level       : level 1
cpu MHz         : 33.00333500
I-cache         : 64 KB
D-cache         : 64 KB (WB)
ITLB entries    : 120
DTLB entries    : 120 - shared with ITLB


PUFFINLOOKHERE! now initializing CR14
PUUIFF fault_vector is 15800
secret message is "cows can fly"
interrupted with code 142, regs 00000000
IAOQ: 00000000 00000000
PSW: 00000000
EIR: 00000000
interrupted with code 241, regs 00000000
IAOQ: 00000000 00000000
Calibrating delay loop...

Then it hangs with no leds blinking ...

The kernel messages are the same using the PARISC/Linux Bootstrap and
rbootd.

And then my question:
I think the 715/33 does  not  have a Dino or a Lasi chip (am I right?), but
 does it have a gecko (and what is this?)?

Ulrich
---------------------------------------------
Ulrich Strelow
<ulrich.strelow@schering.de or
ulrich_strelow@yahoo.com>
Berlin, Germany