[parisc-linux] sti & b2k: doesn't work?

[Joel Soete]

>
>Which graphics card do you have ?
>What does "lspci -v" and/or dmesg (look for "sti:") says ?

Hi Helge,

Sorry for delay but during week-end I do not have access to this system ;).

Here are the info:
# lspci -v
[snip]
01:00.0 3D controller: Hewlett-Packard Company Visualize FXe (rev 03)
	Subsystem: Hewlett-Packard Company: Unknown device 108c
	Flags: bus master, 66Mhz, medium devsel, latency 255, IRQ 256
	Memory at fffffff0 (64-bit, prefetchable) [size=16M]
	Memory at fffffff0 (64-bit, non-prefetchable) [size=16M]
	Expansion ROM at fffff800 [size=128K]
[snip]
00:0e.2 USB Controller: National Semiconductor Corporation USB Controller
(rev 02) (prog-if 10 [OHCI])
	Flags: bus master, medium devsel, latency 240, IRQ 193
	Memory at fffffff0 (32-bit, non-prefetchable) [size=4K]
	Memory at fffffff0 (32-bit, non-prefetchable) [size=4K]
[snip]

# more /var/log/dmesg
[snip]
STI PCI graphic ROM found at fffffffff4940000 (128 kB), fb at fffffffffb000000
(16 MB)
    id 35acda16-9a02587, conforms to spec rev. 8.0c
    graphics card name: HPA4982A
stifb: 'HPA4982A' (id: 0x35acda16) not supported.
[snip]

hth,
    Joel

PS: for pdc_console on b2k, I don't care for the moment that stifb is not
supported ;)




-------------------------------------------------------------------------
Tiscali ADSL: 12 mois à 29,50 €/mois! L'Internet rapide, c'est pour tout
le monde.
http://reg.tiscali.be/default.asp?lg=fr