[parisc-linux] Re: parisc-linux digest, Vol 1 #1353 - 5 msgs
JjDunnjr@aol.com
JjDunnjr@aol.com
Fri, 17 Oct 2003 12:10:07 EDT
--part1_1a4.1b2d6030.2cc16e5f_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
In a message dated 10/17/2003 8:31:41 AM Eastern Daylight Time,
parisc-linux-request@lists.parisc-linux.org writes:
> Message: 1
> Date: Thu, 16 Oct 2003 10:02:20 -0300 (ADT)
> From: Steve Bromwich <lists@fop.ns.ca>
> To: parisc-linux@lists.parisc-linux.org
> Subject: Re: [parisc-linux] 715/75 malfunction
>
> Hi,
>
> On Wed, 15 Oct 2003 JjDunnjr@aol.com wrote:
>
> >Gentlepersons:
> >I have a 715/75 workstation. I have acquired a set of Debian CDs from an
> >official source.
> >Just recently, but now without fail, the w/s won't boot. The LEDs display
> >the following messages:
> >
> >within 2 seconds: 7-5-4-3-2-1
> >
> >2 seconds later: 6-1
>
> I had a similar problem on a 715/50 and the workstation became a spares
> box (ie, not worth repairing). http://www.openpa.net/led.html has a
> listing of LED codes, I think 6-1 is CPU/FPU error, with a solution of
> "probably replace mainboard/CPU".
>
> Cheers, Steve
>
Steve:
thanks for the URL. very helpful. I will take your advice and find another
box.
grateful but frustrated
jack dunn
--part1_1a4.1b2d6030.2cc16e5f_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
<HTML><FONT FACE=3Darial,helvetica><FONT SIZE=3D2 FAMILY=3D"SANSSERIF" FACE=
=3D"Arial" LANG=3D"0">In a message dated 10/17/2003 8:31:41 AM Eastern Dayli=
ght Time, parisc-linux-request@lists.parisc-linux.org writes:<BR>
<BR>
<BLOCKQUOTE TYPE=3DCITE style=3D"BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT=
: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Message: 1<BR>
Date: Thu, 16 Oct 2003 10:02:20 -0300 (ADT)<BR>
From: Steve Bromwich <lists@fop.ns.ca><BR>
To: parisc-linux@lists.parisc-linux.org<BR>
Subject: Re: [parisc-linux] 715/75 malfunction<BR>
<BR>
Hi,<BR>
<BR>
On Wed, 15 Oct 2003 JjDunnjr@aol.com wrote:<BR>
<BR>
>Gentlepersons:<BR>
>I have a 715/75 workstation. I have acquired a set of Debian CDs f=
rom an<BR>
>official source.<BR>
>Just recently, but now without fail, the w/s won't boot. The LEDs=20=
display<BR>
>the following messages:<BR>
><BR>
>within 2 seconds: 7-5-4-3-2-1<BR>
><BR>
>2 seconds later: 6-1<BR>
<BR>
I had a similar problem on a 715/50 and the workstation became a spares<BR>
box (ie, not worth repairing). http://www.openpa.net/led.html has a<BR>
listing of LED codes, I think 6-1 is CPU/FPU error, with a solution of<BR>
"probably replace mainboard/CPU".<BR>
<BR>
Cheers, Steve<BR>
</BLOCKQUOTE><BR>
<BR>
Steve:<BR>
thanks for the URL. very helpful. I will take your advice and fi=
nd another box.<BR>
grateful but frustrated<BR>
jack dunn</FONT></HTML>
--part1_1a4.1b2d6030.2cc16e5f_boundary--