[parisc-linux] C110 builtin nic slow?

[Joel Soete]

Hi all,

Joel Soete wrote:
> Hi all,
> 
> 
> Joel Soete wrote:
> 
>>
>>
>> M. Grabert wrote:
>>
>>> Sorry to reply myself,
>>
>>
> this is me now ;)
Again, apologies

> 
> A small follow-up: I exchange my 3com with another hp nic (the same as 
> the first one).
> 
> The pb now, is that the new one become eth0 (and works fine) but the old 
> one (which would be eth1) is not any-more usable (no means to configure 
> to setup and configure it):
> # cat /proc/pci
> [...]
>   Bus  0, device  11, function  0:
>     Ethernet controller: Hewlett-Packard Company J2585B HP 10/100VG PCI 
> LAN Ada
> ter (rev 0).
>       IRQ 9.
>       Master Capable.  Latency=64.  Min Gnt=8.Max Lat=32.
>       I/O at 0xe000 [0xe0ff].
>       Non-prefetchable 32 bit memory at 0xeb000000 [0xeb001fff].
>   Bus  0, device  12, function  0:
>     Ethernet controller: Hewlett-Packard Company J2585B HP 10/100VG PCI 
> LAN Ada
> ter (#2) (rev 0).
>       IRQ 10.
>       Master Capable.  Latency=64.  Min Gnt=8.Max Lat=32.
>       I/O at 0xe400 [0xe4ff].
>       Non-prefetchable 32 bit memory at 0xeb002000 [0xeb003fff].
> [...]
> 
> Any idea?
> 
I found: ether=9,0,eth0 ether=10,0,eth1 as additional bootparam.

It works but I am confused:
at the office I also have two nic (well of tulip model) on my b2k but I 
never have to add any bootparam to make recognise the second card?
Is it linked with the model capability?

Thanks,
	Joel

PS:  ft problem seems to be solved :)
hmm this 3com works perfectly with 10BT-hd at the office but connected 
this time to a hub (10BT capable) :0