[parisc-linux] Boot-up challenges on a 715/75
JjDunnjr@aol.com
JjDunnjr@aol.com
Tue, 18 Nov 2003 16:31:23 EST
--part1_1e2.13b31f0d.2cebe9ab_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Gentlepersons:
Attempting to install Debian for HPPA on my 715/75 diskless workstation.
Setup includes: 2 2gig Seagate drives, scsi, IDs set at 5 and 6
an external TEAC CD-R55S, scsi, ID set at 2
1. Interrupt boot process with SEC
2. Get a list of boot devices, as follows:
P0 scsi.6.0 seagate ST32550N
P1 scsi.5.0 seagate ST32171N
P2 scsi 0.0 TEAC cd-R55S
enter P2, where the Debian Official CD Binary-1 HPPA is located
Message follows:
Failed to Initialize scsi.0.0
ENTRY_INIT status= -4
80000007 00000001 00000000 00000000 00000000 00000000 00000000
00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
00003510 000000FF FF0003BF 84000007 800100DC 00000000 0025F000 00000400
98080000 00000000 0000D4D8 00000000 000000FF 00000002 00000004
00000001
Occasiionally, I can get:
ENTRY_INIT status= -7
I have tried several ways to call up this CD-RW. I have specified the scsi
address; I have rewritten the PATHs to direct boot up. All to no avail
It is clear that the 715/75 recognizes the TEAC but does not recognize the
scsi Address.
any help
Thanks in advance
jack dunn
--part1_1e2.13b31f0d.2cebe9ab_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
<HTML><FONT FACE=3Darial,helvetica><FONT SIZE=3D2 FAMILY=3D"SANSSERIF" FACE=
=3D"Arial" LANG=3D"0">Gentlepersons:<BR>
Attempting to install Debian for HPPA on my 715/75 diskless workstation.<BR>
Setup includes: 2 2gig Seagate drives, scsi, IDs set at 5 and 6<BR>
an external TEAC CD-R55S, scsi, ID set at 2<BR>
<BR>
1. Interrupt boot process with SEC<BR>
2. Get a list of boot devices, as follows:<BR>
<BR>
P0 scsi.6.0 seagate ST32550N<BR>
P1 scsi.5.0 seagate ST32171N<BR>
P2 scsi 0.0 TEAC cd-R55S<BR>
<BR>
enter P2, where the Debian Official CD Binary-1 HPPA is located<BR>
Message follows:<BR>
<BR>
Failed to Initialize scsi.0.0<BR>
ENTRY_INIT status=3D -4<BR>
80000007 00000001 00000000 00000000 00000000 0=
0000000 00000000 00000000<BR>
00000000 00000000 00000000 00000000 00000000 0=
0000000 00000000 00000000 <BR>
00003510 000000FF FF0003BF 84000007 800100DC 0000000=
0 0025F000 00000400<BR>
98080000 00000000 0000D4D8 00000000 000000FF 0=
0000002 00000004 00000001<BR>
<BR>
Occasiionally, I can get:<BR>
ENTRY_INIT status=3D -7<BR>
<BR>
I have tried several ways to call up this CD-RW. I have specified the=20=
scsi address; I have rewritten the PATHs to direct boot up. All to no=20=
avail<BR>
It is clear that the 715/75 recognizes the TEAC but does not recognize the s=
csi Address.<BR>
<BR>
any help<BR>
<BR>
Thanks in advance<BR>
jack dunn<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
</FONT></HTML>
--part1_1e2.13b31f0d.2cebe9ab_boundary--