[parisc-linux] 2.6.0-test1-pa1 crashes on 715/100
Ruediger Scholz
rscholz@hrzpub.tu-darmstadt.de
Sat, 19 Jul 2003 21:23:33 +0200
This is a multi-part message in MIME format.
--------------050503030805080500070407
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Hi there!
I tried to run 2.6.0-test1-pa1 on my machine but it crashes right after
"Freeing unused kernel memory". IAOQ says something bout
"canonicalize_funcptr_for_compare" so I will give gcc-3.2 a run to see
how far the kernel will get then.
Greetings,
Ruediger
--------------050503030805080500070407
Content-Type: text/plain;
name="gandalf-2.6.0.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="gandalf-2.6.0.log"
----------------------------------------------------------------------------
BootRom Version 1.6
Memory Size: 128 MB
----------------------------------------------------------------------------
(c) Copyright 1990-1994, Hewlett-Packard Company.
All rights reserved
Press <ESCAPE> to stop boot sequence.
----------------------------------------------------------------------------
Command Description
------- -----------
Auto [boot|search] [on|off] Set/show auto mode
Boot [pri|alt [isl]] Boot from primary or alternate path
Boot [scsi|eisa.<slot>[.<addr>]] [isl] Boot from SCSI or EISA
Boot lan[.<addr>] [install] [isl] Boot from LAN
Chassis [on|off] Set/show chassis codes display mode
DefaultSS Reboot and set EEPROM to default values
Diagnostic [on|off] Set/show diagnostic boot mode
Fastboot [on|off] Set/show fast boot mode
Help Show this command menu
Information Show system information
LanAddress Show LAN station addresses
Monitor [<DEV>[.<type>]] Set/show graphics monitor type
(<DEV>=graphics|graphics_<1|2>)
Path [pri|alt [<DEV>[.<addr>]]] Set/show boot source path
(<DEV>=lan|scsi|eisa.<slot>)
Path [console [<DEV>[.<parm>]]] Set/show boot console path
(<DEV>=<RS232>|<GRAPH>
<RS232>=rs232|rs232_2
<parm>=<baud>.<length>.<parity>
<GRAPH>=graphics|graphics_<1|2>
<parm>=<monitor>)
Path [keyboard [hil|ps2]] Set/show boot keyboard path
Pim [hpmc|toc|lpmc] Show PIM info
Search [ipl] [scsi|eisa] Show potential boot devices
Search [ipl] [lan [install]] Show potential boot LAN devices
Secure [on|off] Set/show security mode
----------------------------------------------------------------------------
BOOT_ADMIN> bo pri ipl
Attempting to boot.
Loading Initial Program Loader
IPL successfully loaded
Booting
palo ipl 1.2 root@b2000 Tue Jan 14 13:13:07 MST 2003
Partition Start(MB) End(MB) Id Type
1 1 22 f0 Palo
2 23 64 83 ext2
3 65 194 82 swap
4 195 2046 83 ext2
PALO(F0) partition contains:
0/vmlinux32 3223985 bytes @ 0x48000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current command line:
2/vmlinux root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102
0: 2/vmlinux
1: root=/dev/sda4
2: HOME=/
3: devfs=mount
4: console=ttyS0
5: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? 0
2/vmlinux-2.6.0-test1-pa1
Current command line:
2/vmlinux-2.6.0-test1-pa1 root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102
0: 2/vmlinux-2.6.0-test1-pa1
1: root=/dev/sda4
2: HOME=/
3: devfs=mount
4: console=ttyS0
5: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? 0 b
Command line for kernel: 'root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux-2.6.0-test1-pa1'
Selected kernel: /vmlinux-2.6.0-test1-pa1 from partition 2
ELF32 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 2266045 mediaptr 0x1000
Segment 1 load 0032a000 size 409816 mediaptr 0x22b000
Segment 2 load 00390000 size 532608 mediaptr 0x290000
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.6.0-test1-pa1 (ruediger@gandalf) (gcc version 3.2.3 20030415 (Debian prerelease)) #1 Fri Jul 18 21:58:57 CEST 2003
FP[0] enabled: Rev 1 Model 13
The 32-bit Kernel has started...
Determining PDC firmware type: Snake.
model 000060b0 00000481 00000000 00000000 77b661a7 00000000 00000004 00000072 00000072
vers 0000000b
model 9000/715
Total Memory: 128 Mb
pagetable_init
On node 0 totalpages: 32768
DMA zone: 32768 pages, LIFO batch:8
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux-2.6.0-test1-pa1
PID hash table entries: 16 (order 4: 128 bytes)
Console: colour dummy device 160x64
Calibrating delay loop... 99.73 BogoMIPS
Memory: 126192k available
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
POSIX conformance testing by UNIFIX
Initializing RT netlink socket
EISA bus registered
Searching for devices...
Found devices:
1. Coral SGC Graphics (10) at 0xf4000000 [0], versions 0x4, 0x0, 0x77
2. Mirage GSC Builtin Graphics (10) at 0xf8000000 [1], versions 0x13, 0x0, 0x85
3. Mirage Core BA (11) at 0xf0100000 [2], versions 0x29, 0x0, 0x81
4. Mirage Core SCSI (10) at 0xf0106000 [2/0/1], versions 0x29, 0x0, 0x82
5. Mirage Core LAN (802.3) (10) at 0xf0107000 [2/0/2], versions 0x29, 0x0, 0x8a
6. Mirage Core RS-232 (10) at 0xf0105000 [2/0/4], versions 0x29, 0x0, 0x8c
7. Mirage Core Centronics (10) at 0xf0102000 [2/0/6], versions 0x29, 0x0, 0x74
8. Mirage Audio (10) at 0xf0104000 [2/0/8], versions 0x29, 0x0, 0x7b
9. Mirage Core PC Floppy (10) at 0xf010a000 [2/0/10], versions 0x29, 0x0, 0x83
10. Mirage Core PS/2 Port (10) at 0xf0108000 [2/0/11], versions 0x29, 0x0, 0x84
11. Mirage Core PS/2 Port (10) at 0xf0108100 [2/0/12], versions 0x29, 0x0, 0x84
12. Mirage Wax BA (11) at 0xf0200000 [5], versions 0x13, 0x0, 0x8e
13. Mirage 100 Wax HIL (10) at 0xf0201000 [5/0/1], versions 0x13, 0x0, 0x73
14. Mirage Wax RS-232 (10) at 0xf0202000 [5/0/2], versions 0x13, 0x0, 0x8c
15. Mirage 100 (0) at 0xfffbe000 [8], versions 0x60b, 0x0, 0x4
16. Memory (1) at 0xfffbf000 [9], versions 0x4b, 0x0, 0x9
CPU(s): 1 x PA7100LC (PCX-L) at 100.000000 MHz
Lasi version 0 at 0xf0100000 found.
LED display at f00e0000 registered
Wax at 0xf0200000 found.
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 244 entries (12 bytes)
biovec pool[1]: 4 bvecs: 244 entries (48 bytes)
biovec pool[2]: 16 bvecs: 244 entries (192 bytes)
biovec pool[3]: 64 bvecs: 244 entries (768 bytes)
biovec pool[4]: 128 bvecs: 122 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 61 entries (3072 bytes)
SCSI subsystem initialized
pty: 256 Unix98 ptys configured
Journalled Block Device driver loaded
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled
Gecko-style soft power switch enabled.
lp: driver loaded but no devices found
Generic RTC Driver v1.07
ttyS0 at MMIO 0xf0105800 (irq = 90) is a 16550A
ttyS1 at MMIO 0xf0202800 (irq = 121) is a 16550A
parport_init_chip: initialize bidirectional-mode.
parport0: PC-style at 0xf0102800, irq 88 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Found i82596 at 0xf0107000, IRQ 87
eth0: 82596 at 0xf0107000, 08 00 09 7A DC 08 IRQ 87.
82596.c $Revision: 1.29 $
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi0: 53c710 rev 2
scsi0 : LASI SCSI 53c700
anticipatory scheduling elevator
scsi0: (2:0) Synchronous at offset 8, period 100ns
Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
scsi0: (3:0) Synchronous at offset 8, period 100ns
Vendor: SEAGATE Model: ST32430N Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
st: Version 20030622, fixed bufsize 32768, s/g segs 256
scsi0: (3:0) Enabling Tag Command Queuing
SCSI device sda: 4194685 512-byte hdwr sectors (2148 MB)
SCSI device sda: drive cache: none
/dev/scsi/host0/bus0/target3/lun0: p1 p2 p3 p4
Attached scsi disk sda at scsi0, channel 0, id 3, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0, type 5
Attached scsi generic sg1 at scsi0, channel 0, id 3, lun 0, type 0
STI GSC/PCI core graphics driver Version 0.9a
STI byte mode ROM at f4000000, hpa at f4000000
STI id 2bcb015a-9a02587, conforms to spec rev. 8.04
STI device: HPA4071A
STI word mode ROM at f0024000, hpa at f8000000
STI id 2b4ded6d-40a00499, conforms to spec rev. 8.04
STI device: HPA208LC1024
sticon: Initializing STI text console.
Console: switching to colour STI console 160x64
mice: PS/2 mouse device common for all mice
Keyboard initialization sequence failled
input: PS/2 keyboard port at 0xf0108000 (irq 69) found and attached
input: PS/2 mouse port at 0xf0108100 (irq 69) found and attached
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 524k freed
Stack Dump:
10590598: 10590598 10343200 17f22200 00000001
10590588: 10030110 17eef620 0900deee 0900deee
10590578: 1033f000 10597980 10419810 00027774
10590568: 00000000 00000008 00000001 1032c810
10590558: 10419810 10342810 10419e44 10590200
10590548: 0000000f 00000000 00027550 0000000f
10590538: 00000010 00000010 00000000 1010631c
10590528: 0000000f 00000148 103f7bcc 10590488
10590518: 00000008 10343124 00000201 00000001
10590508: 10343468 10343010 00000010 faf00810
105904f8: 0000005f 00000010 00000010 00000050
105904e8: 00000010 00000010 00000001 10419e44
105904d8: 17eef620 00027550 1032a010 0000000e
105904c8: 105b6534 103f7b40 10590480 0000005f
105904b8: 00000010 00000010 00000050 10121658
105904a8: 0000000f 00000148 103f7bcc 10590408
10590498: 00000000 10343448 17eef620 0000000f
10590488: 10030110 10343124 00000000 00000000
10590478: 17fd0000 17ee7200 17ee7200 101b0b8c
10590468: 17ed966c 10590210 10590108 17ed9600
10590458: 17ed9600 10404260 00000000 17ee7340
10590448: 00000000 17ee7340 100837a0 17eef668
10590438: 103f7bcc 103f7bcc 10590414 1010a088
10590428: 10121e1c 10597670 00000000 00000001
10590418: 10590414 10590414 10121e1c 10590388
10590408: 00000000 10587348 105881d0 00000000
105903f8: 00000000 17f3e060 17ee7340 1013a4f0
105903e8: 17f3e0cc 10590210 10590108 00000000
105903d8: 1033f000 10590210 00027550 00000000
105903c8: 0c601094 0000000d 105900d4 1044c730
105903b8: 00000000 40181838 10401604 101e650c
105903a8: 101e6508 00000000 00000000 00000000
10590398: 00000000 00000000 00000000 00000001
10590388: 00000000 00000001 00000001 00000000
10590378: 00000000 10590108 00000003 101b0a64
10590368: 00000006 00000000 00000000 00000000
10590358: 05b6719b 00000000 00000002 00000000
10590348: 10590108 17eef820 17ee6420 10343124
10590338: 000014f4 000006fc 00000df8 101567a4
10590328: 00000000 00000001 00000001 f0000704
10590318: f000b858 00000002 0000000f 10340810
10590308: ffffe836 10340810 0000000f 00000000
105902f8: 10590140 00000064 10390000 00000000
105902e8: 00000002 00000000 00000002 10419e44
105902d8: 10342810 00000000 00000002 00000000
105902c8: 00000002 00000002 1033b020 f0000704
105902b8: 00000001 00000001 00000000 1016955c
105902a8: 1032c810 10419810 10342810 00000000
10590298: 00000000 00000000 00000000 00000000
10590288: 00000000 00000000 00000000 40061097
10590278: 10590200 00000400 00000000 1032a010
10590268: 00027552 00000400 00000000 00000400
10590258: 00000000 101e64d8 00027552 1032a010
10590248: 0900deee 1033f000 10597670 10419810
10590238: 00027774 00000000 105900d4 00000001
10590228: 1033f000 00026f74 105b6540 105900c8
10590218: 105b6534 0000000e 1032a010 00027550
10590208: 10130070 10383010 0006000e f0000704
105901f8: 00000001 10597670 00000000 10166bb8
105901e8: 00000004 faf002c8 1032a010 0000000c
105901d8: 00000000 ffffffe0 10597670 00000040
105901c8: 105b6854 0000000d 00000000 10419810
105901b8: 10597670 1033f000 0900deee 10130070
105901a8: 00020002 00000000 00020002 faf00350
Kernel addresses on the stack:
[<10234de8>] scsi_request_fn+0x54/0x2ec
[<10106074>] parisc_terminate+0x5c/0xa8
[<1010631c>] handle_interruption+0x25c/0x56c
[<10121658>] io_schedule+0x3c/0x68
[<101b0b8c>] new_devfs_lookup_struct+0x18/0x50
[<1010a088>] intr_check_sig+0x0/0xc
[<1013a4f0>] filemap_nopage+0x2b4/0x3cc
[<101e650c>] __canonicalize_funcptr_for_compare+0x34/0x128
[<101b0a64>] devfs_open+0xa4/0xd4
[<101567a4>] dentry_open+0x12c/0x1b0
[<1016955c>] locate_fd+0x120/0x15c
[<10166bb8>] open_namei+0xac/0x4b8
[<10130070>] do_sigaction+0xf0/0x28c
[<10106210>] handle_interruption+0x150/0x56c
[<10130568>] sys_rt_sigaction+0x80/0xb4
[<1010afe8>] syscall_exit+0x0/0x28
[<1010a088>] intr_check_sig+0x0/0xc
Kernel Fault: Code=15 regs=10590200 (Addr=00027550)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001100000000000001110 Not tainted
r00-03 00000000 10383010 10130070 00027550
r04-07 1032a010 0000000e 105b6534 105900c8
r08-11 105b6540 00026f74 1033f000 00000001
r12-15 105900d4 00000000 00027774 10419810
r16-19 10597670 1033f000 0900deee 1032a010
r20-23 00027552 101e64d8 00000000 00000400
r24-27 00000000 00000400 00027552 1032a010
r28-31 00000000 00000400 10590200 40061097
sr0-3 00000001 00000001 00000000 00000001
sr4-7 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 101e6508 101e650c
IIR: 0c601094 ISR: 00000000 IOR: 00027550
CPU: 0 CR30: 10590000 CR31: 10386000
ORIG_R28: 00000000
IAOQ[0]: __canonicalize_funcptr_for_compare+0x30/0x128
IAOQ[1]: __canonicalize_funcptr_for_compare+0x34/0x128
RP(r2): do_sigaction+0xf0/0x28c
--------------050503030805080500070407--