[parisc-linux] Kernel 2.6.0-test1-pa0 crashes
Rüdiger Scholz
rscholz@hrzpub.tu-darmstadt.de
Tue, 15 Jul 2003 21:37:35 +0200
This is a multi-part message in MIME format.
--------------020209020800070707060502
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 8bit
Sorry, forgot the bootlog....
Rüdiger Scholz schrieb:
> Hi,
>
> yesterday I compiled the shiny new 2.6.0-kernel and tried to boot it
> on my 715/100. But it crashed right after the message "Freeing memory..."
> Kernel was compiled with gcc-3.3.
>
> Has anyone an idea why it crashed? Full System.map and Config-File is
> there: http://rscholz.bluehash.de/parisc .
>
> TIA,
> Rüdiger Scholz
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
>
>
--------------020209020800070707060502
Content-Type: text/plain;
name="gandalf-2.6.0-test1.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="gandalf-2.6.0-test1.log"
----------------------------------------------------------------------------
BootRom Version 1.6
Memory Size: 128 MB
----------------------------------------------------------------------------
(c) Copyright 1990-1994, Hewlett-Packard Company.
All rights reserved
Press <ESCAPE> to stop boot sequence.
----------------------------------------------------------------------------
Command Description
------- -----------
Auto [boot|search] [on|off] Set/show auto mode
Boot [pri|alt [isl]] Boot from primary or alternate path
Boot [scsi|eisa.<slot>[.<addr>]] [isl] Boot from SCSI or EISA
Boot lan[.<addr>] [install] [isl] Boot from LAN
Chassis [on|off] Set/show chassis codes display mode
DefaultSS Reboot and set EEPROM to default values
Diagnostic [on|off] Set/show diagnostic boot mode
Fastboot [on|off] Set/show fast boot mode
Help Show this command menu
Information Show system information
LanAddress Show LAN station addresses
Monitor [<DEV>[.<type>]] Set/show graphics monitor type
(<DEV>=graphics|graphics_<1|2>)
Path [pri|alt [<DEV>[.<addr>]]] Set/show boot source path
(<DEV>=lan|scsi|eisa.<slot>)
Path [console [<DEV>[.<parm>]]] Set/show boot console path
(<DEV>=<RS232>|<GRAPH>
<RS232>=rs232|rs232_2
<parm>=<baud>.<length>.<parity>
<GRAPH>=graphics|graphics_<1|2>
<parm>=<monitor>)
Path [keyboard [hil|ps2]] Set/show boot keyboard path
Pim [hpmc|toc|lpmc] Show PIM info
Search [ipl] [scsi|eisa] Show potential boot devices
Search [ipl] [lan [install]] Show potential boot LAN devices
Secure [on|off] Set/show security mode
----------------------------------------------------------------------------
BOOT_ADMIN> bo priipl
Not a boot path
BOOT_ADMIN> bo pri ipl
Attempting to boot.
Loading Initial Program Loader
IPL successfully loaded
Booting
palo ipl 1.2 root@b2000 Tue Jan 14 13:13:07 MST 2003
Partition Start(MB) End(MB) Id Type
1 1 22 f0 Palo
2 23 64 83 ext2
3 65 194 82 swap
4 195 2046 83 ext2
PALO(F0) partition contains:
0/vmlinux32 3223985 bytes @ 0x48000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current command line:
2/vmlinux root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102
0: 2/vmlinux
1: root=/dev/sda4
2: HOME=/
3: devfs=mount
4: console=ttyS0
5: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? 0
2/vmlinux-2.6.0-test1-pa0
Current command line:
2/vmlinux-2.6.0-test1-pa0 root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102
0: 2/vmlinux-2.6.0-test1-pa0
1: root=/dev/sda4
2: HOME=/
3: devfs=mount
4: console=ttyS0
5: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? 0 b
Command line for kernel: 'root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux-2.6.0-test1-pa0'
Selected kernel: /vmlinux-2.6.0-test1-pa0 from partition 2
ELF32 executable
Entry 00100220 first 00100000 n 3
Segment 0 load 00100000 size 2477712 mediaptr 0x1000
Segment 1 load 0035e000 size 389400 mediaptr 0x25e000
Segment 2 load 003c0000 size 303232 mediaptr 0x2be000
Branching to kernel entry point 0x00100220. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.6.0-test1-pa0 (root@gandalf) (gcc-Version 3.3.1 20030626 (Debian prerelease)) #1 Mon Jul 14 23:14:30 CEST 2003
FP[0] enabled: Rev 1 Model 13
The 32-bit Kernel has started...
Determining PDC firmware type: Snake.
model 000060b0 00000481 00000000 00000000 77b661a7 00000000 00000004 00000072 00000072
vers 0000000b
model 9000/715
Total Memory: 128 Mb
pagetable_init
On node 0 totalpages: 32768
DMA zone: 32768 pages, LIFO batch:8
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux-2.6.0-test1-pa0
PID hash table entries: 16 (order 4: 128 bytes)
Console: colour dummy device 160x64
Calibrating delay loop... 99.73 BogoMIPS
Memory: 126232k available
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
POSIX conformance testing by UNIFIX
Initializing RT netlink socket
EISA bus registered
Searching for devices...
Found devices:
1. Coral SGC Graphics (10) at 0xf4000000 [0], versions 0x4, 0x0, 0x77
2. Mirage GSC Builtin Graphics (10) at 0xf8000000 [1], versions 0x13, 0x0, 0x85
3. Mirage Core BA (11) at 0xf0100000 [2], versions 0x29, 0x0, 0x81
4. Mirage Core SCSI (10) at 0xf0106000 [2/0/1], versions 0x29, 0x0, 0x82
5. Mirage Core LAN (802.3) (10) at 0xf0107000 [2/0/2], versions 0x29, 0x0, 0x8a
6. Mirage Core RS-232 (10) at 0xf0105000 [2/0/4], versions 0x29, 0x0, 0x8c
7. Mirage Core Centronics (10) at 0xf0102000 [2/0/6], versions 0x29, 0x0, 0x74
8. Mirage Audio (10) at 0xf0104000 [2/0/8], versions 0x29, 0x0, 0x7b
9. Mirage Core PC Floppy (10) at 0xf010a000 [2/0/10], versions 0x29, 0x0, 0x83
10. Mirage Core PS/2 Port (10) at 0xf0108000 [2/0/11], versions 0x29, 0x0, 0x84
11. Mirage Core PS/2 Port (10) at 0xf0108100 [2/0/12], versions 0x29, 0x0, 0x84
12. Mirage Wax BA (11) at 0xf0200000 [5], versions 0x13, 0x0, 0x8e
13. Mirage 100 Wax HIL (10) at 0xf0201000 [5/0/1], versions 0x13, 0x0, 0x73
14. Mirage Wax RS-232 (10) at 0xf0202000 [5/0/2], versions 0x13, 0x0, 0x8c
15. Mirage 100 (0) at 0xfffbe000 [8], versions 0x60b, 0x0, 0x4
16. Memory (1) at 0xfffbf000 [9], versions 0x4b, 0x0, 0x9
CPU(s): 1 x PA7100LC (PCX-L) at 100.000000 MHz
Lasi version 0 at 0xf0100000 found.
LED display at f00e0000 registered
Wax at 0xf0200000 found.
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 244 entries (12 bytes)
biovec pool[1]: 4 bvecs: 244 entries (48 bytes)
biovec pool[2]: 16 bvecs: 244 entries (192 bytes)
biovec pool[3]: 64 bvecs: 244 entries (768 bytes)
biovec pool[4]: 128 bvecs: 122 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 61 entries (3072 bytes)
SCSI subsystem initialized
STI GSC/PCI core graphics driver Version 0.9a
STI byte mode ROM at f4000000, hpa at f4000000
STI id 2bcb015a-9a02587, conforms to spec rev. 8.04
STI device: HPA4071A
STI word mode ROM at f0024000, hpa at f8000000
STI id 2b4ded6d-40a00499, conforms to spec rev. 8.04
STI device: HPA208LC1024
fb0: stifb 1280x1024-8 frame buffer device, id: 2bcb015a, mmio: 0xf4100000
fb1: stifb 1024x768-8 frame buffer device, id: 2b4ded6d, mmio: 0xf8100000
Console: switching to colour frame buffer device 160x64
pty: 256 Unix98 ptys configured
VFS: Disk quotas dquot_6.5.1
Journalled Block Device driver loaded
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
Initializing Cryptographic API
Gecko-style soft power switch enabled.
lp: driver loaded but no devices found
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled
ttyS0 at MMIO 0xf0105800 (irq = 90) is a 16550A
ttyS1 at MMIO 0xf0202800 (irq = 121) is a 16550A
parport_init_chip: initialize bidirectional-mode.
parport0: PC-style at 0xf0102800, irq 88 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Found i82596 at 0xf0107000, IRQ 87
eth0: 82596 at 0xf0107000, 08 00 09 7A DC 08 IRQ 87.
82596.c $Revision: 1.29 $
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi0: 53c710 rev 2
scsi0 : LASI SCSI 53c700
anticipatory scheduling elevator
scsi0: (2:0) Synchronous at offset 8, period 100ns
Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
scsi0: (3:0) Synchronous at offset 8, period 100ns
Vendor: SEAGATE Model: ST32430N Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
scsi0: (3:0) Enabling Tag Command Queuing
SCSI device sda: 4194685 512-byte hdwr sectors (2148 MB)
SCSI device sda: drive cache: none
/dev/scsi/host0/bus0/target3/lun0: p1 p2 p3 p4
Attached scsi disk sda at scsi0, channel 0, id 3, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0, type 5
Attached scsi generic sg1 at scsi0, channel 0, id 3, lun 0, type 0
Console: switching to colour frame buffer device 160x64
mice: PS/2 mouse device common for all mice
Keyboard initialization sequence failled
input: PS/2 keyboard port at 0xf0108000 (irq 69) found and attached
input: PS/2 mouse port at 0xf0108100 (irq 69) found and attached
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 300k freed
Stack Dump:
10594758: 10594758 0000000e 10594340 10360010
10594748: 103c0f78 00000001 00000000 1027c1f0
10594738: 105946c0 105fcf5c 00000000 101368b4
10594728: 100ecb60 00010501 00000008 00088000
10594718: 00000000 10375810 10594340 105943c0
10594708: 0000001a 00000000 00000b98 00000001
105946f8: 00000001 00000001 00000001 10106200
105946e8: 10423b8c ffffffdd 10423810 10423810
105946d8: 0000000e 105946d0 1042563c 105946c8
105946c8: 105946c8 ffffffdd ffffffff 00000004
105946b8: 10594508 00000001 10594694 1012a3d8
105946a8: 10423b8c ffffffdd 10423810 10423810
10594698: 0000000e 1036e088 00000b00 00000008
10594688: 00000002 ffffffdd 10423810 00000000
10594678: 41000000 00000000 40800000 1012a174
10594668: 40000000 00000000 40000000 7fffffff
10594658: 00000000 00000000 10360080 80000000
10594648: 00000000 1040d010 00000002 00000000
10594638: 41000000 00000000 40800000 10107130
10594628: 7fffffff 00000000 41000000 7fffffff
10594618: 00000000 00000000 10360080 80000000
10594608: 00000000 1040d010 00000002 10585288
105945f8: 10594388 10095350 00000001 1010a088
105945e8: 101446c0 0000014c 17ffe640 00000007
105945d8: 0000000f 000018f1 10413a58 000018f1
105945c8: 0000190f 10412810 10594500 00000000
105945b8: 41000000 00000000 40800000 1010a068
105945a8: 40000000 17ed8060 17ffe640 17ffe640
10594598: 17ed8064 10174d10 00000b98 00000000
10594588: 48930130 0000000e 17ed8060 00000000
10594578: 41000000 00000000 40800000 10231100
10594568: 102310fc 00000000 00000000 00000000
10594558: 00000000 00000000 00000000 00000000
10594548: 00000000 00000000 00000000 00000000
10594538: 41000000 00000000 40800000 00000000
10594528: 40000000 00000000 40000000 7fffffff
10594518: 41800000 00000000 40200000 00000000
10594508: 40200000 00000000 40300000 00000000
105944f8: 41000000 00000000 40800000 7fffffff
105944e8: 7fffffff 00000000 41000000 7fffffff
105944d8: 7fffffff 00000000 40800000 00000000
105944c8: 41000000 7fffffff 7fffffff 00000000
105944b8: 00000000 00000010 00000010 00000000
105944a8: 41800000 00000000 00000000 00000000
10594498: 00000000 ffffffff 7f7fffff ffffffff
10594488: 7f7fffff 7fffffff 7fffffff 00000000
10594478: 40800000 00000000 00000000 00000000
10594468: 00000000 00000000 00000000 00000000
10594458: 00000000 00000000 00000000 00000000
10594448: 00000000 00000000 000d081f 10231e6c
10594438: 105943c0 00000005 00000b00 1035e010
10594428: 10381c50 00000002 105942cc 00000002
10594418: 10110ca4 00000501 00000000 00000001
10594408: 00000000 00000002 f000b858 f0000704
105943f8: 00000001 105942cc 00000000 103c0f78
105943e8: 10360010 10412810 17ed8064 00000002
105943d8: 00000002 00000008 00000b00 1036e088
105943c8: 102310f8 10381810 0004ff0f 00000000
105943b8: 10594340 00000000 00000000 102310f8
105943a8: 00412700 f0105800 f0105800 17f20448
10594398: 17f2c288 00000000 17f204b4 17f20448
10594388: 17f2c288 17ff7854 17f204b4 f0000704
10594378: 1036e088 00000b00 17edc8d8 00000001
10594368: 00000002 17ed8064 10412810 10360010
Kernel addresses on the stack:
[<10122618>] scheduler_tick+0x84/0x434
[<10105f50>] parisc_terminate+0x54/0xa8
[<101368b4>] rcu_process_callbacks+0x8c/0xf0
[<10106200>] handle_interruption+0x25c/0x564
[<1012a3d8>] tasklet_action+0x7c/0xdc
[<1012a174>] do_softirq+0xf0/0xf8
[<10107130>] do_cpu_irq_mask+0x88/0xfc
[<1010a088>] intr_check_sig+0x0/0xc
[<1010a068>] intr_return+0x0/0x14
[<10231100>] init_dev+0x5c/0x4c8
[<103c0f78>] start_kernel+0x4/0x200
[<102310f8>] init_dev+0x54/0x4c8
[<10231bec>] tty_open+0x90/0x394
[<101442a0>] kmem_cache_alloc+0x188/0x1bc
[<10165130>] chrdev_open+0xac/0x144
[<1015c0e4>] get_empty_filp+0x60/0x124
[<101bb7f0>] devfs_open+0xa0/0xd0
[<1015a794>] dentry_open+0x12c/0x1b0
[<1015a660>] filp_open+0x68/0x70
[<10126c40>] printk+0x140/0x1b4
[<1015aafc>] sys_open+0x70/0xb0
[<101003e8>] init+0x5c/0x150
[<10109c5c>] ret_from_kernel_thread+0x1c/0x24
Kernel Fault: Code=26 regs=105943c0 (Addr=00000b98)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001001111111100001111 Not tainted
r00-03 00000000 10381810 102310f8 1036e088
r04-07 00000b00 00000008 00000002 00000002
r08-11 17ed8064 10412810 10360010 103c0f78
r12-15 00000000 105942cc 00000001 f0000704
r16-19 f000b858 00000002 00000000 00000001
r20-23 00000000 00000501 10110ca4 00000002
r24-27 105942cc 00000002 10381c50 1035e010
r28-31 00000b00 00000005 105943c0 10231e6c
sr0-3 00000000 00000000 00000000 00000000
sr4-7 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 102310fc 10231100
IIR: 48930130 ISR: 00000000 IOR: 00000b98
CPU: 0 CR30: 10594000 CR31: 103b5000
ORIG_R28: 41000000
IAOQ[0]: init_dev+0x58/0x4c8
IAOQ[1]: init_dev+0x5c/0x4c8
RP(r2): init_dev+0x54/0x4c8
--------------020209020800070707060502--