[parisc-linux] 2.4.21-paX on an rp2430
Carlos O'Donell
carlos@baldric.uwo.ca
Mon, 14 Jul 2003 14:23:47 -0400
pa,
Downloaded vmlinux-64-2.4.21-pa2 from cvs.parisc-linux.org
palo --commandline='0/vmlinux64 console=/dev/ttyS0 root=/dev/sda2' \
-k ./vmlinux-64-2.4.21-pa2 \
-s ./lifimage64
Then proceeded to netboot this kernel from a new rp2430, and I didn't
get very far :(
Has anyone tried testing the prebuilt kernels on newer machines?
I also tried a newer vmlinux-2.4.20-pa10-UP and the kernel oopses :(
---
Main Menu: Enter command or menu > bo lan
Interact with IPL (Y, N, or Cancel)?> y
Booting...
Network Station Address 00306e-48a712
System IP Address 192.168.1.200
Server IP Address 192.168.1.222
Boot IO Dependent Code (IODC) revision 2
HARD Booted.
palo ipl 1.2 root@b2000 Tue Jan 14 13:13:07 MST 2003
Boot image contains:
0/vmlinux64 5196863 bytes @ 0x8800
Current command line:
0/vmlinux64 console=/dev/ttyS0 root=/dev/sda2
0: 0/vmlinux64
1: console=/dev/ttyS0
2: root=/dev/sda2
Edit which field?
(or 'b' to boot with this command line)? b
Command line for kernel: 'console=/dev/ttyS0 root=/dev/sda2 palo_kernel=0/vmlinux64'
Selected kernel: /vmlinux64 from partition 0
ELF64 executable
Entry 00100000 first 00100000 n 4
Segment 0 load 00100000 size 2789296 mediaptr 0x1000
Segment 1 load 003aa000 size 1012928 mediaptr 0x2aa000
Segment 2 load 004a4000 size 319568 mediaptr 0x3a2000
Segment 3 load 004f4000 size 49152 mediaptr 0x3f1000
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH OFF ON ON
LED State: There was a system interruption that did not take the system down.
Check Chassis and Console Logs for error messages.
processor system initialization 1C00
processor system initialization 1C00