[parisc-linux] B1000 Debian 3.0r1 High-Priority Machine Check

[Steve Cornett]

> Steve, can you try the beta Boot Floppies?
My B1000 cannot seem to boot from floppy.  I verified my floppy drive
works from HP-UX.  When I use the firmware command "boot floppy" I
immediately get the error shown below, without an attempt to read from
the floppy drive.

Firmware Version 5.0
...
Main Menu: Enter command > boot floppy
ERROR:  Not a boot path
Main Menu: Enter command > in
Information Menu: Enter command > io
I/O MODULE INFORMATION
 
IODC IODC
Path         Decimal     Type                  Location   HVER SVER
Vers Dep
------------ ----------- --------------------- ---------- ---- ----
---- ----
LAN          10/0/12/0   Ethernet              built-in   0050 a200
0x02 0x00
AUDIO        10/0/13/0   Audio                 built-in   
IDE          10/0/14/0   IDE                   built-in   0050 a300
0x00 0x00
SUPERIO MISC 10/0/14/1   Bridge Device         built-in   
FLOPPY       10/0/14/1/0 Floppy Disk           built-in   
SERIAL_1     10/0/14/1/1 RS232 Port            built-in   0050 8c00
0x01 0x00
SERIAL_2     10/0/14/1/2 RS232 Port            built-in   0050 8c00
0x01 0x00
PARALLEL     10/0/14/1/3 Parallel Port         built-in   
USB          10/0/14/2   USB                   built-in   0050 a900
0x98 0x00
SCSI         10/0/15/0   SCSI                  built-in   0050 a300
0x00 0x00
FWSCSI       10/0/15/1   SCSI                  built-in   0050 a300
0x00 0x00
GRAPHICS(2)  10/6/2/0    PCI_GRAFFITIX1024     slot 2     0070 8500
0x01 0x00

Main Menu: Enter command > boot 10/0/14/1/0

ERROR:  Not a boot path