[parisc-linux] D370

Arto Jantunen viiru@debian.org
Thu, 02 Jan 2003 20:41:07 +0200


Herb Radford <herbr@magma.ca> writes:

> Has there been any change in the support for the D-Class machines with
> an Access Port card?
> I'm not sure I understand what's happening when the AP card is
> inserted. If I boot into the PDC I get the console on Serial 1. If I
> boot with my console plugged into the AP card serial port I get nada!
> When I plug my console into Serial 2 I also get zip!
> If I boot with the console in Serial 1, output stops at the famous
> "branching to" message.
>
> Must the AP card be removed for useful o[peration?

Thats how I did it for my D390 and after that it works fine. Also,
you can do the "switch to serial 2 after the branching point" dance..

Also, so that others know, with the current (as in 2.4.20) kernels
(which fixed some unaligned access issues, I believe), the machine
works just fine on 32-bit SMP.

-- 
Arto Jantunen