[parisc-linux] 2.4.20-rc1-pa7 boot problem

[jsoe0708@tiscali.be]

Hi all,

Starting to investigate squid problem (having tree different behaviour between
my install), I try to boot my sarge b180 with my test k-2.4.20-rc1-pa7 (booting
well my b2k) but it failled with following messages:
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 19, function 0
sym53c8xx: 53c875 detected 
sym53c875-0: rev 0x4 on pci bus 0 device 19 function 0 irq 99
sym53c875-0: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3c-20010512
blk: queue 1003d774, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: IBM       Model: DDRS-39130WS      Rev: HP01
  Type:   Direct-Access                      ANSI SCSI revision: 02
blk: queue 1003d874, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: IBM       Model: DDRS-39130WS      Rev: HP01
  Type:   Direct-Access                      ANSI SCSI revision: 02
blk: queue 1003d974, I/O limit 4095Mb (mask 0xffffffff)
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi1: 53c710 rev 2 
scsi1 : LASI SCSI 53c700
Attached scsi disk sda at scsi0, channel 0, id 5, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0
sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 15)
SCSI device sda: 17773524 512-byte hdwr sectors (9100 MB)
Partition check:
 sda:scsi : aborting command due to timeout : pid 38, scsi0, channel 0, id
5, lun 0 0x28 00 00 00 00 00 00 00 08 00 
sym53c8xx_abort: pid=38 serial_number=39 serial_number_at_timeout=39

Any idea.

Thanks in advance,
    Joel

PS: I used sym1 as scsi device driver

********************************************************************************
Controlez mieux votre consommation Internet...surfez Tiscali Complete...http://tiscali.complete.be