[parisc-linux] netbooting kernel
Dark Fiber
dfiber@mega-tokyo.com
Sat, 23 Mar 2002 23:21:44 +0000
when trying to netboot my c200 to install the 0.9 cd,
it doesnt get very far...
i did a sea lan and get a p0 reference;
P0 LAN.192.168.1.1.3.254 192.168.1.1 100/Full Dx
(192.168.1.1 being my router, .1.10 is my freebsd box).
so when I boot p0 i get
Cannot find ENTRY_TEST.
Failed to initialize.
ENTRY_INIT
Status = -7
checking the arp cache on my router doesnt even give a reference
to my c200 (i dont even know the c200's booting default ip)
BUT! checking my dhcp ip assignment table in the router i get
3 192.168.1.11 00-60-B0-B2-89-18 11:49:02.600
so I know its created an entry for the machine...
i also know the cable is good (i netboot my sparcstation 5 just peachy).
doing a direct connect from my c200 to my pc (freebsd 4.5) and doing a sea lan
gets no result.
i have my /etc/ethers set with the c200 MAC
i have tftpboot setup, bootpd, rarpd, etc.
if it helps here is some of the techo info from the c200;
(mebbe a known bug in some firmware I have? problem is, since I cant boot
the c200, I cant update the firmware....)
Firmware Version 5.8
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State Coprocessor State I/D Cache
--------- -------- --------------------- -----------------
-------------
0 200 MHz Active Functional 512 KB/1 MB
Central Bus Speed (in MHz) : 120
Available memory (bytes) : 268406784
Good memory required (bytes): 21610496
Primary boot path: FWSCSI.6.0
Alternate boot path: SESCSI.6.0
Console path: GRAPHICS(4)
Keyboard path: PS2
LAN Station Address: 0060b0-b28918
CHIP REVISIONS
Module Revision
------ --------
Backplane Board 1
I/O Board 3
Processor Board 0
PA 8200-8200 CPU 4.0
PDC 5.8
Memory Controller 9
I/O Bus Adapter 0 15
GSC to PCI Bridge 0x6803
Multi I/O Chip 0
I/O Bus Adapter 1 15
GSC to PCI Bridge 0x6822
GSC 1 40MHz
GSC 2 40MHz
GRAPHICS(4) 8.09/100 2fc1066b.09a02587
I/O MODULE INFORMATION
IODC IODC
Path Decimal Type Location HVER SVER Vers Dep
------------ ------- ------------------------- ---------- ---- ---- ---- ----
8/0 8/0 Bus Bridge built-in 6803 0a00 0x00 0x00
SERIAL_2 8/0/63 RS232 port built-in 0060 8c00 0x01 0x00
8/16 8/16 Bus Adapter built-in 0560 8100 0x00 0x00
8/16/0 8/16/0 Parallel built-in 0560 7400 0x00 0x00
8/16/1 8/16/1 Audio built-in 0564 7b00 0x00 0x00
SERIAL_1 8/16/4 RS232 built-in 0560 8c00 0x01 0x00
SESCSI 8/16/5 SE SCSI built-in 0560 8200 0x99 0x00
PS2 8/16/7 Keyboard built-in 0560 8400 0x00 0x00
8/16/8 8/16/8 Mouse built-in 0560 8400 0x00 0x00
8/63 8/63 Bus Converter built-in 5011 0c00 0x00 0x00
10/0 10/0 Bus Bridge built-in 6821 0a00 0x00 0x00
10/63 10/63 Bus Converter built-in 5011 0c00 0x00 0x00
-Dark Fiber <dfiber@mega-tokyo.com>
[FAQ] Write Your Own Operating System
http://www.mega-tokyo.com/os
Sarien Sierra AGI Emulator
http://www.mega-tokyo.com/sarien
3x3 Eyes Fanfiction Archive
http://www.mega-tokyo.com/pai
AD&D UnderDark Roguelike
http://www.mega-tokyo.com/underdark
Roguelike News II
http://www.mega-tokyo.com/rlnews