[parisc-linux] 743 VME board boots

Sun, 27 Jan 2002 15:17:44 +0000

Hi,
  I just stuck a 743 board in a VME rack and powered it up - it "just
worked" :)   Did an install from a 0.9.3-pre CD via frame buffer
console. This board has a FWD zalon scsi expansion board, which was
detected ok, although I didn't have any devices on that interface.
Thanks to Grant for the boards.

Richard

Linux version 2.4.9-32 (root@paer) (gcc version 3.0.2 (Debian)) #1 Fri Nov 30 19:36:30 MST 2001
FP[0] enabled: Rev 1 Model 13
The 32-bit Kernel has started...
Determining PDC firmware type: Snake.
model	00006040 00000481 00000000 00000000 4c418c55 00000000 00000004 00000072 00000072
vers	0000000c
CPUID	vers 0 rev 0
model	9000/743
Total Memory: 128 Mb
pagetable_init
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda3 HOME=/ console=tty0 sti=0 sti_font=VGA8x16 TERM=linux
Console: colour dummy device 160x64
Calibrating delay loop... 99.73 BogoMIPS
Memory: 126200k available
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Searching for devices...
Found devices:
1. Anole Artist Optional Graphics (10) at 0xf8000000 [1], versions 0x8, 0x0, 0x85
2. Anole 100 Core BA (11) at 0xf0100000 [2], versions 0x1b, 0x0, 0x81
3. Anole 100 Core SCSI (10) at 0xf0106000 [2/0/1], versions 0x1b, 0x0, 0x82
4. Anole 100 Core LAN (802.3) (10) at 0xf0107000 [2/0/2], versions 0x1b, 0x0, 0x8a
5. Anole 100 Core RS-232 (10) at 0xf0105000 [2/0/4], versions 0x1b, 0x0, 0x8c
6. Anole 100 Core Centronics (10) at 0xf0102000 [2/0/6], versions 0x1b, 0x0, 0x74
7. Anole 100 Audio (10) at 0xf0104000 [2/0/8], versions 0x1b, 0x0, 0x7b
8. Anole 100 Core PS/2 Port (10) at 0xf0108000 [2/0/11], versions 0x1b, 0x0, 0x84
9. Anole 100 Core PS/2 Port (10) at 0xf0108100 [2/0/12], versions 0x1b, 0x0, 0x84
10. Anole 64 TIMI BA (11) at 0xffc11000 [7], versions 0x1b, 0x0, 0x93
11. Anole 100 VME Networking (10) at 0xffcf0000 [7/0/1], versions 0x1b, 0x0, 0x88
12. Anole 100 Timi RS-232 (10) at 0xffc1a000 [7/0/2], versions 0x21, 0x0, 0x8c
13. unknown device (10) at 0xffcf1000 [7/0/3], versions 0x1b, 0x0, 0x8f
14. Anole 100 (743/100) (0) at 0xfffbe000 [8], versions 0x604, 0x0, 0x4
15. unknown device (1) at 0xfffbf000 [9], versions 0x0, 0x0, 0x9
16. Shrike Add-on FW-SCSI (4) at 0xfff88000 [11], versions 0x14, 0x0, 0x89
17. Anole 100 VME BA (11) at 0xffc00000 [15], versions 0x1b, 0x0, 0x78
CPU(s): 1 x PA7100LC (PCX-L) at 100.000000 MHz
Lasi version 0 at 0xf0100000 found.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
parport_init_chip: initialize bidirectional-mode.
parport0: PC-style at 0xf0102800, irq 88 [PCSPP,TRISTATE]
STI word mode ROM at f002e000, hpa=f8000000
STI word mode ROM, id 2b4ded6d-40a00499, conforms to spec rev. 8.04
STI device: HPA208LC1280
Console: switching to colour frame buffer device 160x64
fb0: stifb 1280x1024-8 frame buffer device, id: 2b4ded6d, mmio: 0xf8100000
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at iomem 0xf0105800 (irq = 90) is a 16550A
IRQ not found for serial device at 0xffc1a000
Warning : device (10, 0x21, 0x0, 0x8c) NOT claimed by Serial RS232
PS/2 keyboard port at 0xf0108000 (irq 69) found, device attached.
Lasi PS/2 transmit buffer timeout
PS/2 psaux port at 0xf0108100 (irq 69) found, no device attached.
lp0: using parport0 (interrupt-driven).
Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com)
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
loop: loaded (max 8 devices)
Found i82596 at 0xf0107000, IRQ 87
eth0: 82596 at 0xf0107000, 08 00 09 4F FE 1A IRQ 87.
82596.c $Revision: 1.26 $
SCSI subsystem driver Revision: 1.00
zalon_scsi_callback: Zalon vers field is 0x1, IRQ 34
ncr53c8xx: 53c720 detected
ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential
scsi0 : ncr53c8xx-3.4.3b-20010512
53c700: Version 2.6 By James.Bottomley@HansenPartnership.com
scsi1: 53c710 rev 2 
scsi1 : LASI SCSI 53c700
scsi1: (0:0) Synchronous at offset 8, period 236ns
  Vendor: TOSHIBA   Model: CD-ROM XM-5401TA  Rev: 1036
  Type:   CD-ROM                             ANSI SCSI revision: 02
scsi1: (1:0) Synchronous at offset 8, period 100ns
  Vendor: IBM       Model: DCHS04F  CLAR04   Rev: HP53
  Type:   Direct-Access                      ANSI SCSI revision: 02
scsi1: (4:0) Synchronous at offset 8, period 100ns
  Vendor: IBM       Model: DCHS04F  CLAR04   Rev: HP53
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi1, channel 0, id 1, lun 0
Attached scsi disk sdb at scsi1, channel 0, id 4, lun 0
scsi1: (1:0) Enabling Tag Command Queuing
SCSI device sda: 8813870 512-byte hdwr sectors (4513 MB)
Partition check:
 sda: sda1 sda2 sda3
scsi1: (4:0) Enabling Tag Command Queuing
SCSI device sdb: 8813870 512-byte hdwr sectors (4513 MB)
 sdb: sdb1
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
Lasi Harmony Audio rev. 0 at 0xf0104000, using IRQ 82
sticonsole_init: searching for STI ROMs
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 249912k swap-space (priority -1)
eth0: link ok.
VFS: Disk change detected on device sr(11,0)
ISO 9660 Extensions: RRIP_1991A