[parisc-linux] How to configure EISA network card in 715/80

Christian Suder csuder@cisco.com
Fri, 11 Jan 2002 11:38:02 -0800


I do see those same messages :


>PCI or EISA Host Bus Adapter 0 not registered. in16(0x100) returning -1

running newer kernels on a C110 with a NE1000 NIC. With 2.4.9-pa23 it works 
nicely. Here is the output with a newer kernel 2.4.17-pa3 :

15. Raven T' Wax EISA BA (11) at 0xfc000000 [8/20/5], versions 0x1e, 0x0, 
0x90,
  additional addresses: 0xf4000000
16. U2-IOA BC GSC+ Port (7) at 0xf5fbf000 [8/63], versions 0x501, 0x1, 0xc
17. U2-IOA BC Runway Port (12) at 0xfff8a000 [10], versions 0x580, 0x7, 0xb
18. Coral SGC Graphics (10) at 0xf6000000 [10/20], versions 0x4, 0x0, 0x77
19. U2-IOA BC GSC+ Port (7) at 0xf5fff000 [10/63], versions 0x501, 0x1, 0xc
20. Raven 120 T' (0) at 0xfffa0000 [32], versions 0x58e, 0x0, 0x4
21. SkyHawk 100/120 (1) at 0xfffb1000 [49], versions 0x49, 0x0, 0x9
CPU(s): 1 x PA7200 (PCX-T') at 120.000000 MHz
ccio found U2 at 0xfff88000
ccio found U2 at 0xfff8a000
Lasi version 0 at 0xffd00000 found.
Wax at 0xffe00000 found.
Wax: HIL Keyboard-NMI registered.
Wax EISA Adapter found at 0xfc000000
EISA: failed to claim EISA Bus address space!

Note the message in the last line !

Maybe that gives some hint what its going on,

         Christian