[parisc-linux] How to configure EISA network card in 715/80

[Matthew Wilcox]

On Fri, Jan 11, 2002 at 11:07:45AM -0500, Rafael Herrera wrote:
> 1. Mirage 80 GSC Builtin Graphics (10) at 0xf8000000 [1], versions 0x10, 0x0, 0x85
> 2. Mirage 80 Core BA (11) at 0xf0100000 [2], versions 0x2b, 0x0, 0x81
> 3. Mirage 80 Core SCSI (10) at 0xf0106000 [2/0/1], versions 0x2b, 0x0, 0x82
> 4. Mirage 80 Core LAN (802.3) (10) at 0xf0107000 [2/0/2], versions 0x2b, 0x0, 0x8a
> 5. Mirage 80 Core RS-232 (10) at 0xf0105000 [2/0/4], versions 0x2b, 0x0, 0x8c
> 6. Mirage 80 Core Centronics (10) at 0xf0102000 [2/0/6], versions 0x2b, 0x0, 0x74
> 7. Mirage 80 Audio (10) at 0xf0104000 [2/0/8], versions 0x2b, 0x0, 0x7b
> 8. Mirage 80 Core PC Floppy (10) at 0xf010a000 [2/0/10], versions 0x2b, 0x0, 0x83
> 9. Mirage 80 Core PS/2 Port (10) at 0xf0108000 [2/0/11], versions 0x2b, 0x0, 0x84
> 10. Mirage 80 Core PS/2 Port (10) at 0xf0108100 [2/0/12], versions 0x2b, 0x0, 0x84
> 11. Pace Wax BA (11) at 0xf0200000 [5], versions 0x10, 0x0, 0x8e
> 12. Pace Core HIL (10) at 0xf0201000 [5/0/1], versions 0x10, 0x0, 0x73
> 13. Mirage 80 Wax RS-232 (10) at 0xf0202000 [5/0/2], versions 0x10, 0x0, 0x8c
> 14. Mirage 80 (0) at 0xfffbe000 [8], versions 0x619, 0x0, 0x4
> 15. Mirage 80 (1) at 0xfffbf000 [9], versions 0x4f, 0x0, 0x9

This is rather strange.  I see no EISA adapter.  Sure, we have Wax in
its role as a bus adapter, with its HIL & RS-232 subdevices, but there's
no EISA device.  Anyone know why this might be?

(iirc, it normally shows up as device 6).

-- 
Revolutions do not require corporate support.