[parisc-linux] 2.4.16-pa24 crashes on c3k

Mon, 31 Dec 2001 19:08:08 -0500

Does this mean that the answer is to just keep downloading kernels until it
works?  BTW, somewhere in the process my problems with Eth0/1 were solved.
All I can think of was the one install that I tried from source.  I guess
the `make modules` or `make module_install` fixed something without my
knowing it.  Anyway, I can now telnet, ftp, ping, etc. my J2240 from my
WinDoze PCs so I'm a little further along.

----- Original Message -----
From: Grant Grundler <grundler@dsl2.external.hp.com>
To: Craig D. Lansing <lansing@beldar.com>
Cc: <parisc-linux@lists.parisc-linux.org>
Sent: Monday, December 31, 2001 12:22 PM
Subject: Re: [parisc-linux] 2.4.16-pa24 crashes on c3k

> "Craig D. Lansing" wrote:
> > Did you ever get this resolved?
>
> Well, for the systems I can test (A500/C3000), yes.
> IIRC, Thomas Bogendoerf said he fixed it for B132 and C200.
>
> > I saw Tom's reply that it could be related to /boot extending beyond
2GB,
>
> In general yes. But given recent kernel changes around PCI/EISA HBA
numbering
> I'd say it's a kernel problem.
>
> > J2240, I have tried 32-2.4.16-pa24 and pa29 and am getting stack dumps
> > similar to yours.  I have tried the pre-compiled kernels and creating
from
> > source to no avail.  The general steps are:
> >
> > 1. Download kernel or kernel source
> > 2. Compile if from source
> > 3. Copy vmlinux***, System.map.***, and Config.*** to /boot
> > 4. Link vmlinux to vmlinux***
> > 5. Edit /etc/palo.conf
> > 6. run palo (no args)
>
> You don't need to run palo again. It doesn't hurt either.
> Just point /boot/vmlinux (or whatever palo.conf says) to the new kernel.
>
> Just a few more nits interesting to other kernel developers.
> I hope Ryan or Thomas can sort this out for you.
>
> > Linux version 2.4.9-32 (root@paer) (gcc version 3.0.2 (Debian)) #1 Fri
Nov
> > 30 19:36:30 MST 2001
> ...
> > model   9000/782/J2240
> ...
> > Found devices:
> > 1. U2-IOA BC Runway Port (12) at 0xfff88000 [8], versions 0x580, 0xf,
0xb
> > 2. unknown device (13) at 0xfc000000 [8/0], versions 0x5d, 0x3, 0xa
> > 3. SummitHawk Dino RS-232 (10) at 0xfc003000 [8/0/63], versions 0x5d,
0x0,
> > 0x8c
> > 4. Dino PCI Bridge (13) at 0xfc004000 [8/4], versions 0x680, 0x3, 0xa
> > 5. SummitHawk 230 Core BA (11) at 0xffd00000 [8/12], versions 0x5c, 0x0,
> > 0x81,
> > additional addresses: 0xffc00000
> > 6. SummitHawk 230 Core Centronics (10) at 0xffd02000 [8/12/0], versions
> > 0x5c, 0x
> > 0, 0x74,  additional addresses: 0xffd03000
> > 7. SummitHawk 230 Core Audio (10) at 0xffd04000 [8/12/1], versions 0x5c,
> > 0x4, 0x
> > 7b
> > 8. SummitHawk 230 Core SCSI (10) at 0xffd06000 [8/12/5], versions 0x5c,
0x0,
> > 0x8
> > 2
> > 9. SummitHawk 230 Core PS/2 Port (10) at 0xffd08000 [8/12/7], versions
0x5c,
> > 0x0
> > , 0x84
> > 10. SummitHawk 230 Core PS/2 Port (10) at 0xffd08100 [8/12/8], versions
> > 0x5c, 0x
> > 0, 0x84
> > 11. U2-IOA BC GSC+ Port (7) at 0xfc03f000 [8/63], versions 0x501, 0x1,
0xc
> > 12. U2-IOA BC Runway Port (12) at 0xfff8a000 [10], versions 0x580, 0xf,
0xb
> > 13. Cujo PCI Bridge (13) at 0xf1604000 [10/4], versions 0x682, 0x1, 0xa,
> > additi
> > onal addresses: 0xf6000000
> > 14. SummitHawk Dino RS-232 (10) at 0xf1607000 [10/4/63], versions 0x5d,
0x0,
> > 0x8
> > c
> > 15. U2-IOA BC GSC+ Port (7) at 0xf163f000 [10/63], versions 0x501, 0x1,
0xc
> > 16. SummitHawk U+ (0) at 0xfffa0000 [32], versions 0x5b5, 0x0, 0x4
> > 17. SummitHawk U+ (0) at 0xfffa2000 [34], versions 0x5b5, 0x0, 0x4
> > 18. SummitHawk Memory (1) at 0xfffb1000 [49], versions 0x83, 0x0, 0x9
> > CONFIG_SMP=n  ignoring additional CPUs
> > Warning : device (0, 0x5b5, 0x0, 0x4) NOT claimed by CPU
> > CPU(s): 1 x PA8200 (PCX-U+) at 236.000000 MHz
> > ccio found U2 at 0xfff88000
> > io_io_low: 0xf8000000
> > 19. unknown device (13) at 0xfc000000 [8/0], versions 0x5d, 0x3, 0xa
> > 20. SummitHawk Dino RS-232 (10) at 0xfc003000 [8/0/63], versions 0x5d,
0x0,
> > 0x8c
> > 21. Dino PCI Bridge (13) at 0xfc004000 [8/4], versions 0x680, 0x3, 0xa
>
> I think the devices showing up twice has been fixed in 2.4.16 kernels.
>
> > 22. SummitHawk 230 Core BA (11) at 0xffd00000 [8/12], versions 0x5c,
0x0,
> > 0x81,
> >  additional addresses: 0xffc00000
> > 23. SummitHawk 230 Core Centronics (10) at 0xffd02000 [8/12/0], versions
> > 0x5c, 0
> > x0, 0x74,  additional addresses: 0xffd03000
> > 24. SummitHawk 230 Core Audio (10) at 0xffd04000 [8/12/1], versions
0x5c,
> > 0x4, 0
> > x7b
> > 25. SummitHawk 230 Core SCSI (10) at 0xffd06000 [8/12/5], versions 0x5c,
> > 0x0, 0x
> > 82
> > 26. SummitHawk 230 Core PS/2 Port (10) at 0xffd08000 [8/12/7], versions
> > 0x5c, 0x
> > 0, 0x84
> > 27. SummitHawk 230 Core PS/2 Port (10) at 0xffd08100 [8/12/8], versions
> > 0x5c, 0x
> > 0, 0x84
> > 28. U2-IOA BC GSC+ Port (7) at 0xfc03f000 [8/63], versions 0x501, 0x1,
0xc
> > ccio found U2 at 0xfff8a000
> > io_io_low: 0xf1600000
> > 29. Cujo PCI Bridge (13) at 0xf1604000 [10/4], versions 0x682, 0x1, 0xa,
> > additi
> > onal addresses: 0xf6000000
> > 30. SummitHawk Dino RS-232 (10) at 0xf1607000 [10/4/63], versions 0x5d,
0x0,
> > 0x8
> > c
> > 31. U2-IOA BC GSC+ Port (7) at 0xf163f000 [10/63], versions 0x501, 0x1,
0xc
> > Lasi version 0 at 0xffd00000 found.
> > Cujo version unknown found at 0xfc000000
>
> hmm...another nit. We should know the version by now.
>
> > Dino version 3.1 found at 0xfc004000
> > Cujo version 2.0 found at 0xf1604000
> > Enabling Cujo 2.0 bug workaround
> > POSIX conformance testing by UNIFIX
> > Linux NET4.0 for Linux 2.4
> > Based upon Swansea University Computer Society NET3.039
> > Starting kswapd v1.8
> > parport_init_chip: initialize bidirectional-mode.
> > parport0: PC-style at 0xffd02800, irq 88 [PCSPP,TRISTATE]
> > STI PCI ROM enabled at 0xf1ff0000
> > PCI graphic ROM found at f1ff0000 (64 kB), fb @ f6000000 (32 MB)
> > PCI region 0: f6000000 with 32768 kB
> > PCI region 1: 00000000 with 0 kB
> > PCI region 2: 00000000 with 0 kB
> > PCI region 3: 00000000 with 0 kB
> > PCI region 4: 00000000 with 0 kB
> > PCI region 5: 00000000 with 0 kB
> > PCI region 6: f1ff0000 with 64 kB
> > PCI region 7: 00000000 with 0 kB
> > PCI region 8: 00000000 with 0 kB
> > PCI region 9: 00000000 with 0 kB
> > PCI region 10: 00000000 with 0 kB
> > PCI region 11: 00000000 with 0 kB
> > Trying PCI STI ROM at f1ff0000, PCI hpa at f6000000
> > I'm not trying to set up the PCI graphic card now... It would freeze
your
> > machin
> > e
> > Unable to handle STI device 'Hewlett-Packard Company A4977A Visualize
EG'
>
> This should work now too.
> Or at least it's only know to NOT work with the C3000.
>
> grant
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
>