[parisc-linux] problems with PCI IDE controller
Matthew Wilcox
willy@debian.org
Sat, 14 Dec 2002 13:10:48 +0000
On Sat, Dec 14, 2002 at 12:48:43PM +0100, Joerg Steindlberger wrote:
> Here is what I did: Building the kernel - booting the system - doing a
> modprobe -k ide-disk (from remote) - pressing Transfer Of Control -
> interrupting boot sequence and typing ser pim. And here is the output of
> the console: (thank You for helping - Joerg)
Great. Now...
http://www.parisc-linux.org/faq/kernelbug-howto.html
I notice you have devfs compiled in. I can't recommend this course
of action, though I coubt it's the root of the problem.
> hp-c240 login:
> Debian GNU/Linux testing/unstable hp-c240 tts/0
>
> hp-c240 login: Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PDC20268: IDE controller on PCI bus 00 dev 08
> PDC20268: chipset revision 2
> PDC20268: not 100% native mode: will probe irqs later
>
>
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PDC20268: IDE controller on PCI bus 00 dev 08
> PDC20268: chipset revision 2
> PDC20268: not 100% native mode: will probe irqs later
>
> Stack Dump:
> 2f1a0900: 00000002 73747576 6f707172 6b6c6d6e
> 2f1a08f0: 6768696a 1010fdec 00000000 0000000f
> 2f1a08e0: 103dee76 10323810 10323b68 00000036
> 2f1a08d0: 00000061 00000000 00000001 10323810
> 2f1a08c0: 00000000 00000002 103df23f 00000010
> 2f1a08b0: 103dee40 0002423c 00000400 1037da4c
>
> Kernel addresses on the stack:
> [<1010fdec>] [<0002423c>] [<0002ec19>] [<1024ba78>]
> [<00034b44>] [<000204c8>] [<00034b44>] [<0002ebe8>]
> [<0002e898>] [<1011cd58>] [<102d0cec>] [<00034b44>]
> [<00036010>] [<1011ce84>] [<00034b44>] [<00036010>]
> [<000300ea>] [<0002120c>] [<00036010>] [<0002ee98>]
> [<0002e898>] [<1011cd58>] [<00036010>] [<00036010>]
> [<0002c180>] [<0002ba01>] [<000213e8>] [<00020003>]
> [<10135ddc>] [<0000fe30>] [<0001eac3>] [<00017af0>]
> [<0002b9cc>] [<0002ba04>] [<00036010>] [<00010504>]
> [<1011de54>] [<0002d000>] [<0002c5c0>] [<10104904>]
> [<0002c5b4>] [<0002c5b4>] [<0000a060>] [<0002c5d0>]
> [<10108f90>] [<10108084>] [<10107cf4>] [<1013fd44>]
> [<1013e638>] [<1014ed24>] [<0002c5b4>] [<0001436b>]
> [<101205a8>]
>
> High Priority Machine Check (HPMC): Code=1 regs=10313080 (Addr=00000000)
>
> YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
> PSW: 00000000000001000000011100001100 Not tainted
> r00-03 00000000 10320010 1010f840 000000ff
> r04-07 0000fd00 0000fd1f 109ab400 0002e898
> r08-11 109ab400 00000061 00000000 00000001
> r12-15 00000000 2fda3ce0 2f1a0550 00000003
> r16-19 00044c08 00045408 00000000 f200006f
> r20-23 0000000e 0000000f 1026bee4 10323810
> r24-27 0000fd1f 00000003 109ac160 10310010
> r28-31 0000006f ffffe003 2f1a0900 1010f840
> sr0-3 00000000 00000265 00000000 00000265
> sr4-7 00000000 00000000 00000000 00000000
>
> IASQ: 00000000 00000000 IAOQ: 1026bf10 1026bf14
> IIR: 00141860 ISR: 9227ffc8 IOR: 00000064
> CPU: 0 CR30: 2f1a0000 CR31: 103d0000
> ORIG_R28: 00000000
>
>
>
> Firmware Version 5.8
>
> Duplex Console IO Dependent Code (IODC) revision 1
>
> ------------------------------------------------------------------------------
> (c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
> ------------------------------------------------------------------------------
>
> Processor Speed State Coprocessor State I/D Cache
> --------- -------- --------------------- -----------------
> -------------
> 0 236 MHz Active Functional 2 MB/2 MB
>
> Central Bus Speed (in MHz) : 118
>
> Available memory (bytes) : 536870912
> Good memory required (bytes): 44974080
>
> Primary boot path: LAN.0.0.0.0.0.0
> Alternate boot path: FWSCSI.6.0
> Console path: GRAPHICS(4)
> Keyboard path: PS2
>
> CPU 0
> WARNING: Self tests have been disabled as a result of FASTBOOT
> being enabled. To enable self tests, use the FASTBOOT
> command in the CONFIGURATION menu and reboot the system.
>
>
> Processor is booting from first available device.
>
> To discontinue, press any key within 10 seconds.
>
> Boot terminated.
>
>
> ------- Main Menu
> -------------------------------------------------------------
>
> Command Description
> ------- -----------
> BOot [PRI|ALT|<path>] Boot from specified path
> PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
> SEArch [DIsplay|IPL] [<path>] Search for boot devices
>
> COnfiguration [<command>] Access Configuration menu/commands
> INformation [<command>] Access Information menu/commands
> SERvice [<command>] Access Service menu/commands
>
> DIsplay Redisplay the current menu
> HElp [<menu>|<command>] Display help for menu or command
> RESET Restart the system
> -------
> Main Menu: Enter command > ser pim
>
> PROCESSOR PIM INFORMATION
>
> ----------------- Processor 0 HPMC Information ------------------
>
> Timestamp = Fri Dec 13 23:00:06 GMT 2002 (20:02:12:13:23:00:06)
>
> HPMC Chassis Codes = 0xcbf0 0x5007 0x5408 0x5508 0xcbfb
>
> General Registers 0 - 31
> 00-03 0000000000000000 0000000010320010 000000001010f840
> 00000000000000ff
> 04-07 000000000000fd00 000000000000fd1f 00000000109ab400
> 000000000002e898
> 08-11 00000000109ab400 0000000000000061 0000000000000000
> 0000000000000001
> 12-15 0000000000000000 000000002fda3ce0 000000002f1a0550
> 0000000000000003
> 16-19 0000000000044c08 0000000000045408 0000000000000000
> 00000000f200006f
> 20-23 000000000000000e 000000000000000f 000000001026bee4
> 0000000010323810
> 24-27 000000000000fd1f 0000000000000003 00000000109ac160
> 0000000010310010
> 28-31 000000000000006f 00000000ffffe003 000000002f1a0900
> 000000001010f840
>
> <Press any key to continue (q to quit)>
>
> Control Registers 0 - 31
> 00-03 0000000000000000 0000000000000000 0000000000000000
> 0000000000000000
> 04-07 0000000000000000 0000000000000000 0000000000000000
> 0000000000000000
> 08-11 00000000000004ca 0000000000000000 00000000000000c0
> 000000000000001f
> 12-15 0000000000000000 0000000000000000 0000000000107000
> 00000000f0000000
> 16-19 000000195c1e11d2 0000000000000000 000000001026bf10
> 0000000000141860
> 20-23 000000009227ffc8 c000000000000064 000000000004070c
> 0000000080000000
> 24-27 000000000032d000 000000001f208000 00000000ffffffff
> 00000000ffffffff
> 28-31 00000000ffffffff 00000000ffffffff 000000002f1a0000
> 00000000103d0000
>
> Space Registers 0 - 7
> 00-03 00000000 00000265 00000000 00000265
> 04-07 00000000 00000000 00000000 00000000
>
> <Press any key to continue (q to quit)>
>
> IIA Space = 0x0000000000000000
> IIA Offset = 0x000000001026bf14
> Check Type = 0x20000000
> CPU State = 0x9e000004
> Cache Check = 0x00000000
> TLB Check = 0x00000000
> Bus Check = 0x0020000c
> Assists Check = 0x00000000
> Assist State = 0x00000000
> Path Info = 0x00000000
> System Responder Address = 0xfffffffffffa0000
> System Requestor Address = 0x0000000000000000
> Check Summary = 0x8002000040004000
> Available Memory = 0x0000000000000000
> CPU Diagnose Register 2 = 0x0501000000000004
> CPU Status Register 0 = 0x4420c20000000000
> CPU Status Register 1 = 0x8002000000000000
> SADD LOG = 0x0800000000000000
> Read Short LOG = 0xc10010fff200006f
>
> <Press any key to continue (q to quit)>
>
> Memory Error Log Information:
>
> Timestamp = Fri Dec 13 23:00:07 GMT 2002 (20:02:12:13:23:00:07)
>
> No memory errors logged
>
>
> I/O Module Error Log Information:
>
> Timestamp = Fri Dec 13 23:00:08 GMT 2002 (20:02:12:13:23:00:08)
>
> Bus HPA Module Type Path Slt Md Sev Estat Requestor
> Responder
> --- ---------- ---------------- -------- -- -- ---- ----- ----------
> ----------
> 0 0xfff88000 I/O Adapter 8 2 0 he 0x0d 0x00000000
> 0x00000000
> 1 0xf203f000 Bus Converter 8/63 15 3 se 0x07 0xfffa0800
> 0xf200006f
> 1 0xf2000000 Bus Bridge (PCI) 0x07 0xf2000000
> 0x0000fd1f
>
> PCI Device Failure Information
>
> Physical Slot Logical Path
> ------------- ----------------------------
> 1 0/255/255/255/8/0/1/0
>
>
>
> PCI Error Summary
>
> A Processer IO error occurred. The GSC-PCI bridge was
> the requestor. Error bit indicates a master timeout
> or master Abort was received during a PCI transaction.
>
> Bus HPA Module Type Path Slt Md Sev Estat Requestor
> Responder
> --- ---------- ---------------- -------- -- -- ---- ----- ----------
> ----------
> 0 0xfff8a000 I/O Adapter 10 2 2 he 0x0d 0x00000000
> 0x00000000
>
> <Press any key to continue (q to quit)>
> Main Menu: Enter command >
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
--
"It's not Hollywood. War is real, war is primarily not about defeat or
victory, it is about death. I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk