[parisc-linux] Installing on Apollo 735

[Richard Hirst]

On Mon, Sep 10, 2001 at 02:04:53PM +0200, Boyan Lazarov wrote:
> The system just stop 
> The boot parameters are :
> 0: 0/vmlinux
>  1: root=/dev/ram
>  2: initrd=0/ramdisk
>  3: console=ttyS0
>  4: TERM=vt102
>  5: sim700=noneg:0xff,nodisc:0xff
>  6: isl
> 
> And the output is:
> SCSI subsystem driver Revision: 1.00 
> sim700: Configuring 53c700 (SCSI-ID 7) at f0825100, IRQ 86, options 1
> scsi0: Revision 0x0
> scsi0: test 1 completed ok.
> scsi0 : LASI/Simple 53c7xx
>   Vendor: PLEXTOR   Model: CD-ROM PX-32TS    Rev: 1.02
>   Type:   CD-ROM                             ANSI SCSI revision: 02
> scsi0: Unable to abort command for target 5
> scsi0: Unable to send Bus Device Reset for target 5
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: istat = 0c, sstat0 = 00, sstat1 = 00, dstat = 00
> scsi0: dsp = 07875060 (script[0x1418]), dsps = 078751f0, target = 0
> scsi0: Failing command for ID5
>   Vendor: SEAGATE   Model: ST31200N          Rev: 8714
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Detected scsi disk sda at scsi0, channel 0, id 6, lun 0
> 
> After this the system just stops

That's not good.  Can you try with just   sim700=nodisc:0xff
please.

Richard