[parisc-linux] Thomas Marteau kbd patch adapted.(2)
=?iso-8859-1?Q?Jo=EBl_Soete?=
jso@europay.com
Wed, 5 Sep 2001 15:30:03 +0200
Sorry for previous unreadable patch text.
Here is what I hope to be clearer.
--- hp_psaux.c.orig Tue Aug 28 12:02:32 2001
+++ hp_psaux.c Wed Sep 5 10:51:44 2001
@@ -43,6 +43,7 @@
/* HP specific LASI PS/2 keyboard and psaux constants */
#define AUX_REPLY_ACK 0xFA /* Command byte ACK. */
+#define AUX_RESEND 0xFE /* Sent by the keyb. Asking for resending the
last command. */
#define AUX_RECONNECT 0xAA /* scancode when ps2 device is plugged (back)
in */
#define LASI_PSAUX_OFFSET 0x0100 /* offset from keyboard to psaux port */
@@ -71,8 +72,7 @@
#define LASI_STAT_CLKSHD 0x80
static unsigned long lasikbd_hpa;
-static unsigned long lasips2_hpa;
-
+static int cmd_status;
static inline u8 read_input(unsigned long hpa)
{
@@ -106,9 +106,10 @@
}
}
+#if 0
if (wait)
printk(KERN_DEBUG "Lasi PS/2 wait %d\n", wait);
-
+#endif
gsc_writeb(val, hpa+LASI_XMTDATA);
return 1;
@@ -123,14 +124,28 @@
static void lasikbd_leds(unsigned char leds)
{
- write_output(KBD_CMD_SET_LEDS, lasikbd_hpa);
- write_output(leds, lasikbd_hpa);
- write_output(KBD_CMD_ENABLE, lasikbd_hpa);
+ cmd_status=2;
+ while (cmd_status!=0) {
+ write_output(KBD_CMD_SET_LEDS, lasikbd_hpa);
+ mdelay(5);
+ }
+
+ cmd_status=2;
+ while (cmd_status!=0) {
+ write_output(leds, lasikbd_hpa);
+ mdelay(5);
+ }
+
+ cmd_status=2;
+ while (cmd_status!=0) {
+ write_output(KBD_CMD_ENABLE, lasikbd_hpa);
+ mdelay(5);
+ }
}
#if 0
/* this might become useful again at some point. not now -prumpf */
-int lasi_ps2_test(void *hpa)
+int lasi_ps2_test(unsigned long hpa)
{
u8 control,c;
int i, ret = 0;
@@ -155,10 +170,56 @@
}
#endif
-static int __init lasi_ps2_reset(unsigned long hpa, int id)
+static int init_keyb(unsigned long hpa)
+{
+ int fail;
+ u8 data=0;
+
+
+ do {
+ while ((read_status(hpa) & LASI_STAT_TBNE));
+ gsc_writeb(KBD_CMD_SET_LEDS, hpa+LASI_XMTDATA);
+
+ while (!(read_status(hpa) & LASI_STAT_RBNE));
+
+ while ((read_status(hpa) & LASI_STAT_RBNE))
data=read_input(hpa);
+ }while(data!=AUX_REPLY_ACK);
+
+ fail=0;
+
+ do {
+ while ((read_status(hpa) & LASI_STAT_TBNE));
+ gsc_writeb(0x00, hpa+LASI_XMTDATA);
+
+ while (!(read_status(hpa) & LASI_STAT_RBNE));
+
+ while ((read_status(hpa) & LASI_STAT_RBNE)) {
+ data=read_input(hpa);
+ fail++;
+ if(fail==10) break;
+ }
+ }while(data!=AUX_REPLY_ACK);
+
+ fail=0;
+ do {
+ while ((read_status(hpa) & LASI_STAT_TBNE));
+ gsc_writeb(KBD_CMD_ENABLE, hpa+LASI_XMTDATA);
+
+ while (!(read_status(hpa) & LASI_STAT_RBNE));
+ while ((read_status(hpa) & LASI_STAT_RBNE)) {
+ data=read_input(hpa);
+ fail++;
+ if(fail==10) break;
+ }
+
+ }while(data!=AUX_REPLY_ACK);
+
+ return 1;
+}
+
+static void __init lasi_ps2_reset(unsigned long hpa)
{
u8 control;
- int ret = 1;
/* reset the interface */
gsc_writeb(0xff, hpa+LASI_RESET);
@@ -167,22 +228,6 @@
/* enable it */
control = read_control(hpa);
write_control(control | LASI_CTRL_ENBL, hpa);
-
- /* initializes the leds at the default state */
- if (id==0) {
- write_output(KBD_CMD_SET_LEDS, hpa);
- write_output(0, hpa);
- ret = write_output(KBD_CMD_ENABLE, hpa);
- }
-
- return ret;
-}
-
-static int inited;
-
-static void lasi_ps2_init_hw(void)
-{
- ++inited;
}
@@ -363,7 +408,7 @@
lock_kernel();
fasync_aux(-1, file, 0);
if (--aux_count) {
- unlock_kernel();
+ unlock_kernel();
return 0;
}
unlock_kernel();
@@ -399,62 +444,60 @@
id = gsc_readb(hpa+LASI_ID) & 0x0f;
if (id==1)
- hpa -= LASI_PSAUX_OFFSET;
- lasikbd_hpa = hpa;
-
+ hpa -= LASI_PSAUX_OFFSET;
status_keyb = read_status(hpa);
status_mouse = read_status(hpa+LASI_PSAUX_OFFSET);
while ((status_keyb|status_mouse) & LASI_STAT_RBNE){
- while (status_keyb & LASI_STAT_RBNE) {
+ while (status_keyb & LASI_STAT_RBNE) {
- scancode = read_input(hpa);
+ scancode = read_input(hpa);
- /* XXX don't know if this is a valid fix, but filtering
- * 0xfa avoids 'unknown scancode' errors on, eg, capslock
- * on some keyboards.
- */
- if (inited && scancode != 0xfa)
- handle_at_scancode(scancode);
+ /* XXX don't know if this is a valid fix, but filtering
+ * 0xfa avoids 'unknown scancode' errors on, eg, capslock
+ * on some keyboards.
+ */
+
+ if (scancode == AUX_REPLY_ACK)
+ cmd_status=0;
+
+ else if (scancode == AUX_RESEND)
+ cmd_status=1;
+ else
+ handle_at_scancode(scancode);
- status_keyb =read_status(hpa);
- }
+ status_keyb =read_status(hpa);
+ }
#ifdef CONFIG_PSMOUSE
- while (status_mouse & LASI_STAT_RBNE) {
- scancode = read_input(hpa+LASI_PSAUX_OFFSET);
- handle_mouse_scancode(scancode);
- status_mouse = read_status(hpa+LASI_PSAUX_OFFSET);
- }
- status_mouse = read_status(hpa+LASI_PSAUX_OFFSET);
+ while (status_mouse & LASI_STAT_RBNE) {
+ scancode = read_input(hpa+LASI_PSAUX_OFFSET);
+ handle_mouse_scancode(scancode);
+ status_mouse = read_status(hpa+LASI_PSAUX_OFFSET);
+ }
+ status_mouse = read_status(hpa+LASI_PSAUX_OFFSET);
#endif /* CONFIG_PSMOUSE */
- status_keyb = read_status(hpa);
+ status_keyb = read_status(hpa);
}
tasklet_schedule(&keyboard_tasklet);
return (status_keyb|status_mouse);
}
-
-
-
extern struct pt_regs *kbd_pt_regs;
static void lasikbd_interrupt(int irq, void *dev, struct pt_regs *regs)
{
- lasips2_hpa = (unsigned long) dev; /* save "hpa" for lasikbd_leds() */
kbd_pt_regs = regs;
- handle_lasikbd_event(lasips2_hpa);
+ handle_lasikbd_event(dev);
}
-
extern int pckbd_translate(unsigned char, unsigned char *, char);
static struct kbd_ops gsc_ps2_kbd_ops = {
translate: pckbd_translate,
- init_hw: lasi_ps2_init_hw,
leds: lasikbd_leds,
#ifdef CONFIG_MAGIC_SYSRQ
sysrq_key: 0x54,
@@ -468,7 +511,7 @@
unsigned long hpa = dev->hpa;
unsigned int irq;
char *name;
- int device_found;
+ int device_found=0;
u8 id;
id = gsc_readb(hpa+LASI_ID) & 0x0f;
@@ -488,20 +531,10 @@
}
/* reset the PS/2 port */
- device_found = lasi_ps2_reset(hpa,id);
-
- /* allocate the irq and memory region for that device */
- if (!(irq = busdevice_alloc_irq(dev)))
- return -ENODEV;
-
- if (request_irq(irq, lasikbd_interrupt, 0, name, (void *)hpa))
- return -ENODEV;
-
- if (!request_mem_region(hpa, LASI_STATUS + 4, name))
- return -ENODEV;
-
+ lasi_ps2_reset(hpa);
switch (id) {
case 0:
+ device_found = init_keyb(hpa);
register_kbd_ops(&gsc_ps2_kbd_ops);
break;
case 1:
@@ -527,6 +560,17 @@
#endif
} /* of case */
+ /* allocate the irq and memory region for that device */
+ if (!(irq = busdevice_alloc_irq(dev)))
+ return -ENODEV;
+
+ if (request_irq(irq, lasikbd_interrupt, 0, name, (void *)hpa))
+ return -ENODEV;
+
+ if (!request_mem_region((unsigned long)hpa, LASI_STATUS + 4, name))
+ return -ENODEV;
+
+
printk(KERN_INFO "PS/2 %s port at 0x%08lx (irq %d) found, "
"%sdevice attached.\n",
name, hpa, irq, device_found ? "":"no ");
**********************************************************************
This e-mail and any attachments to it may contain confidential information which is strictly intended for the use of the authorised recipient. If you have received this e-mail in error, please delete it and notify the sender by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************