[parisc-linux] disks not recognized by new 53c700/53c710 driver (was [parisc-linux-cvs] linux rhirst)

[Albert Strasheim]

Terribly sorry about that message. mutt is acting up. Intended message:

Hello all,

I just gave 2.4.9-pa53 a spin on my 720/50, wanting to see if perhaps
some random phenomena will allow me to complete the installation. The
Debian installer informed me that I had no disks connected, so I went
back and examined the bootup messages. The relevant portions:

...
Searching for Potential Boot Devices.
To terminate search, press and hold the ESCAPE key.

Device Selection      Device Path              Device Type
----------------------------------------------------------------------------

P0                    scsi.6.0                 MICROP  1528-15MD1066702
P1                    lan.0000e8-e5fdeb.0.0    dogbert
...
Linux version 2.4.9-pa53 (s13640887 at bach.sun.ac.za) (gcc version 3.0.2 20010829
(prerelease)) #2 Sat Oct 13 15:42:01 SAST 2001
...
CPUID   vers 0 rev 0
model   9000/720
...
Kernel command line: HOME=/ root=/dev/ram console=ttyS0 TERM=vt102
... ( don't know if this was there before, but anyway: )
STI byte mode ROM at f8000000, hpa=f8000000
STI byte mode ROM, id 26d1488c-40a00499, conforms to spec rev. 8.02
STI device: HPA1924A
...
Found i82596 at 0xf0826000, IRQ 87
82596.c: MAC of HP700 LAN read from EEPROM
eth0: Couldn't get consistent shared memory
eth0: 82596 at 0xf0826000, 08 00 09 25 4B E1 IRQ 87.
82596.c $Revision: 1.23 $
SCSI subsystem driver Revision: 1.00
sticonsole_init: searching for STI ROMs
Console: switching to colour STI console 160x64
...

No disks?

In my .config (obtained with make oldconfig) I have:

CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20

Did I miss anything or is there something amiss with the driver? :-)

Regards,

Albert

On Mon, 08 Oct 2001, Richard Hirst wrote:

> CVSROOT:	/home/cvs/parisc
> Module name:	linux
> Changes by:	rhirst	01/10/08 15:46:04
> 
> Modified files:
> 	.              : Makefile 
> 	drivers/scsi   : Config.in Makefile 
> 	arch/parisc/debian-configs: 32 64 default 
> Added files:
> 	drivers/scsi   : 53c700.c 53c700.h 53c700.scr NCR_D700.c 
> 	                 NCR_D700.h README.53c700 lasi700.c lasi700.h 
> 
> Log message:
> New driver from James Bottomley for 53c700 and 53c710.  Much improved
> over sim700.c, and already mostly in Linus' tree.  Major differences
> are support for sync working where the chip supports it, tagged
> commands, and disconnect/reselect works (sim700 had problems on
> 53c700, requiring that people booted with sim700=nodisc:0xff).
> I've left the old driver in the source for now, just commented out its
> Config question.  Will remove it completely if there are no problems.
> Tested on 712, 715/50, 715/75, B180, C360 (32 and 64 bit kernels).
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 232 bytes
Desc: not available
Url : http://lists.parisc-linux.org/pipermail/parisc-linux/attachments/20011013/0d41a0f1/attachment.pgp