[parisc-linux] sym53c8xx driver with 64-bit kernel on C200.

[Ryan Bradetich]

I also put some debug code in the _gsc_writel command as you
suggested ..... Here is the output (I let it run overnight because
the added debug to _gsc_writel caused the run-time to slow
down quite considerably (I let it run over night....)

SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 19, function 0
_gsc_writel val: 9804 addr: fffffffff2000064
_gsc_writel val: 9808 addr: fffffffff2000064
_gsc_writel val: 980c addr: fffffffff2000064
_gsc_writel val: 980c addr: fffffffff2000064
_gsc_writel val: 9804 addr: fffffffff2000064
sym53c8xx: setting PCI_COMMAND_IO PCI_COMMAND_MEMORY...
_gsc_writel val: 9800 addr: fffffffff2000064
_gsc_writel val: 9804 addr: fffffffff2000064
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
_gsc_writel val: 9800 addr: fffffffff2000064
_gsc_writel val: 9804 addr: fffffffff2000064
sym53c8xx: 53c875 detected
sym53c875-0: rev 0x4 on pci bus 0 device 19 function 0 irq 195
sym53c875-0: NCR clock is 40401KHz
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0xfffffffff2ffe000
_gsc_writel val: ffffffff addr: fffffffff2ffd00c
pc: 98dd8
_gsc_writel val: 2000000 addr: fffffffff2ffd01c
_gsc_writel val: 800800 addr: fffffffff2ffd010
val: d88d0900
addr: fffffffff2ffd02c
_gsc_writel val: d88d0900 addr: fffffffff2ffd02c


Anyways hope this additional information provide some insight.

Thanks,

- Ryan


Ryan Bradetich wrote:

> Willy,
>
> Thanks for decoding that for me.... it does make more sense now :)
> Here is the debug messages I added to sym53c8xx.c
>
>  pc  = NCB_SCRIPTH0_PHYS (np, snooptest);
>  printk("pc: %x\n", pc);
>  host_wr = 1;
>  ncr_wr  = 2;
>  /*
>  ** Set memory and register.
>  */
>  np->ncr_cache = cpu_to_scr(host_wr);
>  OUTL (nc_temp, ncr_wr);
>  /*
>  ** Start script (exchange values)
>  */
>  OUTL (nc_dsa, np->p_ncb);
>  printk("val: %x\n", __fswab32(pc));
>  printk("addr: %p\n", (void *)((char *)np->reg + (((size_t) &((struct ncr_reg
> *)0)->nc_dsp))));
>  OUTL (nc_dsp, pc);
>
> And here is the scsi boot output:
>
> SCSI subsystem driver Revision: 1.00
> sym53c8xx: at PCI bus 0, device 19, function 0
> sym53c8xx: setting PCI_COMMAND_IO PCI_COMMAND_MEMORY...
> sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
> sym53c8xx: 53c875 detected
> sym53c875-0: rev 0x4 on pci bus 0 device 19 function 0 irq 195
> sym53c875-0: NCR clock is 40401KHz
> sym53c875-0: ID 7, Fast-20, Parity Checking
> sym53c875-0: on-chip RAM at 0xfffffffff2ffe000
> pc: 98dd8
> val: d88d0900
> addr: fffffffff2ffd02c
>
> Here is the function for _gsc_writel:
>     void _gsc_writel(u32 val, void *addr)
>
> So it appears to me the correct arguments are being passed to the _gsc_writel
> function.
> I'm not sure about the values being passed in, but the types look correct, and
> the
> address is properly sign extended.
>
> - Ryan
>
> Matthew Wilcox wrote:
>
> > On Sat, Mar 03, 2001 at 08:45:03PM -0700, Ryan Bradetich wrote:
> > > When I run OUTL(nc_dsp,pc) through the preprocessor the statement gets
> > > expanded into this:
> > >
> > > _gsc_writel(((__builtin_constant_p((__u32)((((pc))))) ? ({ __u32 __x =
> > > (((((pc))))); ((__u32)( (((__u32)(__x) & (__u32)0x000000ffUL) << 24) |
> > > (((__u32)(__x) & (__u32)0x0000ff00UL) << 8) | (((__u32)(__x) &
> > > (__u32)0x00ff0000UL) >> 8) | (((__u32)(__x) & (__u32)0xff000000UL) >>
> > > 24) )); }) : __fswab32(((((pc))))))),(void *)((char *)np->reg +
> > > (((size_t) &((struct ncr_reg *)0)->nc_dsp))));
> >
> > I guess you'd like this decoded?  Let's see.  `pc' is clearly not a constant,
> > so __builtin_constant_p returns false, so we can simplify this down to:
> >
> > _gsc_writel(__fswab32(pc) ,
> >  (void *)((char *)np->reg + (((size_t) &((struct ncr_reg *)0)->nc_dsp))));
> >
> > which leads me to ask `what value does `pc' have?'
> >
> > I suspect you want to put debugging code in _gsc_writel to tell you where
> > you're trying to perform IO to.
> >
> > My suspicion is that you're writing to the 32 bit IO space in 64-bit mode,
> > which is juts not going to work.
> >
> > --
> > Revolutions do not require corporate support.
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux