[parisc-linux] The mouse patch
Thomas Marteau
marteaut@esiee.fr
Mon, 11 Jun 2001 23:26:24 +0200
This is a multi-part message in MIME format.
--------------AA99F5639BE1355209CBE326
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi all,
I have produced a newer code for the mouse PS2 on HP box. I mean the
mouse you plug directly to your 712 for example. Of course, due to the
status of STI-console, it works with the STI frame buffer.
If someone can be kind enough to build a kernel with this patch with
the following .config file and the latest CVS possible and give your
feedback...
The favorite modell will be 712.
Thanks, Thomas
ESIEE Team
--------------AA99F5639BE1355209CBE326
Content-Type: text/plain; charset=us-ascii;
name="mouse.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="mouse.patch"
diff -Nru linux.old/drivers/char/hp_keyb.h linux.new/drivers/char/hp_keyb.h
--- linux.old/drivers/char/hp_keyb.h Thu Jan 1 01:00:00 1970
+++ linux.new/drivers/char/hp_keyb.h Mon Jun 11 21:14:32 2001
@@ -0,0 +1,51 @@
+/*
+ * LASI PS/2 keyboard/psaux header for HP-PARISC workstations
+ *
+ * Copyright 2001 Marteau Thomas <marteaut@esiee.fr>
+ *
+ * This file contains all the data needed by hp_keyb.c and hp_psaux.c
+ *
+ * 2001/05/10 Try to compact the code in the two files
+ *
+ */
+
+/* These defines are not used! */
+#define KBD_ECHO 0xEE /* in/out */
+#define KBD_DEFAULT 0xF6 /* out */
+#define KBD_DIAGFAIL 0xFD /* in */
+
+/* Only in hp_keyb.c */
+#define KBD_BREAK 0xF0 /* in */
+
+/* Standard mouse behaviour parameters */
+
+#define AUX_REPLY_ACK 0xFA /* Command byte ACK. */
+#define AUX_RECONNECT 0xAA /* scancode when ps2 device is plugged (back) in */
+
+/* PA-RISC define */
+#define LASI_OFFSET 0x0100
+
+#define LASI_ID 0x00
+#define LASI_RESET 0x00
+#define LASI_RCVDATA 0x04
+#define LASI_XMTDATA 0x04
+#define LASI_CONTROL 0x08
+#define LASI_STATUS 0x0C
+
+/* Control register bits */
+
+#define LASI_CTRL_ENBL 0x01 /* enable interface */
+#define LASI_CTRL_LPBXR 0x02 /* loopback operation */
+#define LASI_CTRL_DIAG 0x20 /* directly control clock/data line */
+#define LASI_CTRL_DATDIR 0x40 /* data line direct control */
+#define LASI_CTRL_CLKDIR 0x80 /* clock line direct control */
+
+/* Status register bits */
+
+#define LASI_STAT_RBNE 0x01
+#define LASI_STAT_TBNE 0x02
+#define LASI_STAT_TERR 0x04
+#define LASI_STAT_PERR 0x08
+#define LASI_STAT_CMPINTR 0x10
+#define LASI_STAT_DATSHD 0x40
+#define LASI_STAT_CLKSHD 0x80
diff -Nru linux.old/drivers/char/hp_psaux.c linux.new/drivers/char/hp_psaux.c
--- linux.old/drivers/char/hp_psaux.c Mon Jun 11 21:03:39 2001
+++ linux.new/drivers/char/hp_psaux.c Mon Jun 11 21:35:32 2001
@@ -9,7 +9,9 @@
* Marteau Thomas (marteaut@esiee.fr)
* Djoudi Malek (djoudim@esiee.fr)
* fixed leds control
+ * implemented the psaux and controlled the mouse scancode based on pc_keyb.c
*/
+#include <linux/config.h>
#include <asm/hardware.h>
#include <asm/keyboard.h>
@@ -17,58 +19,40 @@
#include <linux/types.h>
#include <linux/ptrace.h> /* interrupt.h wants struct pt_regs defined */
+#include <linux/interrupt.h>
#include <linux/sched.h> /* for request_irq/free_irq */
#include <linux/ioport.h>
#include <linux/kernel.h>
-#include <linux/interrupt.h>
#include <linux/wait.h>
+#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/pc_keyb.h>
#include <linux/kbd_kern.h>
+/* mouse include */
+#include <linux/miscdevice.h>
+#include <linux/malloc.h>
+#include <linux/random.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+#include <asm/uaccess.h>
+#include <linux/poll.h>
+
+/* hp include */
+#include "hp_keyb.h"
static struct hp_device *lasi_psaux_keyb;
static void *lasikbd_hpa;
+static void *lasips2_hpa;
-
-#define KBD_BAT 0xaa /* in */
-#define KBD_SETLEDS 0xed /* out */
-#define KBD_ECHO 0xee /* in/out */
-#define KBD_BREAK 0xf0 /* in */
-#define KBD_TYPRATEDLY 0xf3 /* out */
-#define KBD_SCANENABLE 0xf4 /* out */
-#define KBD_DEFDISABLE 0xf5 /* out */
-#define KBD_DEFAULT 0xf6 /* out */
-#define KBD_ACK 0xfa /* in */
-#define KBD_DIAGFAIL 0xfd /* in */
-#define KBD_RESEND 0xfe /* in/out */
-#define KBD_RESET 0xff /* out */
-
-#define LASI_ID 0x00
-#define LASI_RESET 0x00
-#define LASI_RCVDATA 0x04
-#define LASI_XMTDATA 0x04
-#define LASI_CONTROL 0x08
-#define LASI_STATUS 0x0c
-
-/* Control register bits */
-
-#define LASI_CTRL_ENBL 0x01 /* enable interface */
-#define LASI_CTRL_LPBXR 0x02 /* loopback operation */
-#define LASI_CTRL_DIAG 0x20 /* directly control clock/data line */
-#define LASI_CTRL_DATDIR 0x40 /* data line direct control */
-#define LASI_CTRL_CLKDIR 0x80 /* clock line direct control */
-
-/* Status register bits */
-
-#define LASI_STAT_RBNE 0x01
-#define LASI_STAT_TBNE 0x02
-#define LASI_STAT_TERR 0x04
-#define LASI_STAT_PERR 0x08
-#define LASI_STAT_CMPINTR 0x10
-#define LASI_STAT_DATSHD 0x40
-#define LASI_STAT_CLKSHD 0x80
+#ifdef CONFIG_PSMOUSE
+/* mouse section */
+static unsigned char mouse_reply_expected;
+static struct aux_queue *queue; /* Mouse data buffer. */
+static int aux_count;
+static spinlock_t kbd_controller_lock = SPIN_LOCK_UNLOCKED;
+#endif
static inline u8 read_input(void *hpa)
@@ -111,12 +95,18 @@
return;
}
+/* This function is the PA-RISC adaptation of i386 source */
+
+static void aux_write_ack(u8 val)
+{
+ write_output(val,lasikbd_hpa+LASI_OFFSET);
+}
static void lasikbd_leds(unsigned char leds)
{
- write_output(KBD_SETLEDS, lasikbd_hpa);
+ write_output(KBD_CMD_SET_LEDS, lasikbd_hpa);
write_output(leds, lasikbd_hpa);
- write_output(KBD_SCANENABLE, lasikbd_hpa);
+ write_output(KBD_CMD_ENABLE, lasikbd_hpa);
#if 0
printk("%s(%d)\n", __FUNCTION__, leds);
#endif
@@ -149,7 +139,7 @@
}
#endif
-int lasi_ps2_reset(void *hpa)
+int lasi_ps2_reset(void *hpa, int id)
{
u8 control;
@@ -161,6 +151,13 @@
control = read_control(hpa);
write_control(control | LASI_CTRL_ENBL, hpa);
+ /* initializes the leds at the default state */
+ if (id==0){
+ write_output(KBD_CMD_SET_LEDS, hpa);
+ write_output(0, hpa);
+ write_output(KBD_CMD_ENABLE, hpa);
+ }
+
return 0;
}
@@ -171,34 +168,250 @@
++inited;
}
-static u8 handle_lasikbd_event(void *hpa)
+
+/* Greatly inspired by pc_keyb.c */
+
+/*
+ * Wait for keyboard controller input buffer to drain.
+ *
+ * Don't use 'jiffies' so that we don't depend on
+ * interrupts..
+ *
+ * Quote from PS/2 System Reference Manual:
+ *
+ * "Address hex 0060 and address hex 0064 should be written only when
+ * the input-buffer-full bit and output-buffer-full bit in the
+ * Controller Status register are set 0."
+ */
+#ifdef CONFIG_PSMOUSE
+
+static int fasync_aux(int fd, struct file *filp, int on)
+{
+
+ int retval;
+
+ retval = fasync_helper(fd, filp, on, &queue->fasync);
+ if (retval < 0)
+ return retval;
+
+ return 0;
+}
+
+
+static inline void handle_mouse_scancode(unsigned char scancode)
+{
+
+ if (mouse_reply_expected) {
+ if (scancode == AUX_REPLY_ACK) {
+ mouse_reply_expected--;
+ return;
+ }
+ mouse_reply_expected = 0;
+ }
+ else if(scancode == AUX_RECONNECT){
+ queue->head = queue->tail = 0; /* Flush input queue */
+ return;
+ }
+
+ add_mouse_randomness(scancode);
+ if (aux_count) {
+ int head = queue->head;
+
+ queue->buf[head] = scancode;
+ head = (head + 1) & (AUX_BUF_SIZE-1);
+
+ if (head != queue->tail) {
+ queue->head = head;
+ kill_fasync(&queue->fasync, SIGIO, POLL_IN);
+ wake_up_interruptible(&queue->proc_list);
+ }
+ }
+}
+
+static inline int queue_empty(void)
{
- u8 status;
- extern void handle_at_scancode(int); /* in drivers/char/keyb_at.c */
+ return queue->head == queue->tail;
+}
- while ((status = read_status(hpa)) & LASI_STAT_RBNE) {
- u8 scancode;
+static unsigned char get_from_queue(void)
+{
+ unsigned char result;
+ unsigned long flags;
- scancode = read_input(hpa);
+ spin_lock_irqsave(&kbd_controller_lock, flags);
+ result = queue->buf[queue->tail];
+ queue->tail = (queue->tail + 1) & (AUX_BUF_SIZE-1);
+ spin_unlock_irqrestore(&kbd_controller_lock, flags);
+ return result;
+}
- if (inited)
- handle_at_scancode(scancode);
+
+/*
+ * Write to the aux device.
+ */
+
+static ssize_t write_aux(struct file * file, const char * buffer,
+ size_t count, loff_t *ppos)
+{
+ ssize_t retval = 0;
+
+ if (count) {
+ ssize_t written = 0;
+
+ if (count > 32)
+ count = 32; /* Limit to 32 bytes. */
+ do {
+ char c;
+ get_user(c, buffer++);
+ written++;
+ } while (--count);
+ retval = -EIO;
+ if (written) {
+ retval = written;
+ file->f_dentry->d_inode->i_mtime = CURRENT_TIME;
+ }
}
- tasklet_schedule(&keyboard_tasklet);
+ return retval;
+}
+
- return status;
+
+static ssize_t read_aux(struct file * file, char * buffer,
+ size_t count, loff_t *ppos)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ ssize_t i = count;
+ unsigned char c;
+
+ if (queue_empty()) {
+ if (file->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+ add_wait_queue(&queue->proc_list, &wait);
+repeat:
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (queue_empty() && !signal_pending(current)) {
+ schedule();
+ goto repeat;
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&queue->proc_list, &wait);
+ }
+ while (i > 0 && !queue_empty()) {
+ c = get_from_queue();
+ put_user(c, buffer++);
+ i--;
+ }
+ if (count-i) {
+ file->f_dentry->d_inode->i_atime = CURRENT_TIME;
+ return count-i;
+ }
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ return 0;
}
+
+
+static int open_aux(struct inode * inode, struct file * file)
+{
+ if (aux_count++) {
+ return 0;
+ }
+ queue->head = queue->tail = 0; /* Flush input queue */
+ aux_count =1;
+
+ aux_write_ack(AUX_ENABLE_DEV); /* Enable aux device */
+
+ return 0;
+}
+
+
+/* No kernel lock held - fine */
+static unsigned int aux_poll(struct file *file, poll_table * wait)
+{
+
+ poll_wait(file, &queue->proc_list, wait);
+ if (!queue_empty())
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+
+static int release_aux(struct inode * inode, struct file * file)
+{
+ lock_kernel();
+ fasync_aux(-1, file, 0);
+ if (--aux_count) {
+ unlock_kernel();
+ return 0;
+ }
+ unlock_kernel();
+ return 0;
+}
+#endif
+
+
+/* This function is looking at the PS2 controller and empty the two buffers */
+
+static u8 handle_lasikbd_event(void *hpa)
+{
+ u8 status_keyb,status_mouse,scancode,id;
+ extern void handle_at_scancode(int); /* in drivers/char/keyb_at.c */
+
+ /* Mask to get the base address of the PS/2 controller */
+
+ id = gsc_readb(hpa+LASI_ID) & 0x0f;
+
+ if (id==1)
+ hpa=hpa-LASI_OFFSET;
+ lasikbd_hpa=hpa;
+
+
+ status_keyb = read_status(hpa);
+ status_mouse = read_status(hpa+LASI_OFFSET);
+
+ while ((status_keyb|status_mouse) & LASI_STAT_RBNE){
+
+ while (status_keyb & LASI_STAT_RBNE) {
+
+ scancode = read_input(hpa);
+
+ if (inited)
+ {
+ handle_at_scancode(scancode);
+ }
+
+ status_keyb =read_status(hpa);
+ }
+
+#ifdef CONFIG_PSMOUSE
+ while (status_mouse & LASI_STAT_RBNE) {
+
+ scancode = read_input(hpa+LASI_OFFSET);
+ handle_mouse_scancode(scancode);
+ status_mouse=read_status(hpa+LASI_OFFSET);
+ }
+ status_mouse=read_status(hpa+LASI_OFFSET);
+#endif
+ status_keyb =read_status(hpa);
+ }
+
+ tasklet_schedule(&keyboard_tasklet);
+ return (status_keyb|status_mouse);
+}
+
+
+
extern struct pt_regs *kbd_pt_regs;
static void lasikbd_interrupt(int irq, void *dev, struct pt_regs *regs)
{
- lasikbd_hpa = dev; /* save "hpa" for lasikbd_leds() */
+ lasips2_hpa = dev; /* save "hpa" for lasikbd_leds() */
kbd_pt_regs = regs;
- handle_lasikbd_event(lasikbd_hpa);
+ handle_lasikbd_event(lasips2_hpa);
}
@@ -230,6 +443,21 @@
#endif
};
+#ifdef CONFIG_PSMOUSE
+struct file_operations psaux_fops = {
+ read: read_aux,
+ write: write_aux,
+ poll: aux_poll,
+ open: open_aux,
+ release: release_aux,
+ fasync: fasync_aux,
+};
+
+static struct miscdevice psaux_mouse = {
+ PSMOUSE_MINOR, "psaux", &psaux_fops
+};
+#endif
+
static int __init
lasi_ps2_register(struct hp_device *d, struct pa_iodc_driver *dri)
{
@@ -247,21 +475,27 @@
name = "psaux"; /* "mouse" */;
break;
default:
- printk(KERN_WARNING "unknown PS/2 port %d found! Get famous now by reporting this to parisc-linux@parisc-linux.org!\n", id);
+ printk(KERN_WARNING "unknown PS/2 port %d found! Get famous now by reporting this to parisc-linux@thepuffingroup.com!\n", id);
name = "unknown";
}
- if (id==0) {
- printk("Initializing Lasi PS/2-%s port at 0x%p...\n", name, hpa);
- } else {
- printk("Support for Lasi PS/2-%s not yet available !\n", name); /* FIXME */
- }
+ if (id==0)
+ printk("Initializing Lasi PS/2-%s port at 0x%p...\n", name, hpa);
+#ifdef CONFIG_PSMOUSE
+ else
+ if (id==1)
+ printk("Initializing Lasi PS/2-%s port at 0x%p...\n", name, hpa);
+#endif
+ else
+ printk("Support for Lasi PS/2-%s not yet available !\n", name); /* FIXME */
if (id==0) {
int err;
unsigned int irq;
-
- if ((err = lasi_ps2_reset(hpa)))
+
+ lasikbd_hpa=hpa;
+
+ if ((err = lasi_ps2_reset(hpa,id)))
printk("%s: lasi_ps2_reset() failed!\n", __FUNCTION__);
irq = busdevice_alloc_irq(d);
@@ -270,10 +504,38 @@
request_irq(irq, lasikbd_interrupt, 0, name, hpa);
- request_mem_region((unsigned long)hpa, LASI_STATUS + 4, name);
+ request_region((unsigned long)hpa, LASI_STATUS + 4, name);
register_kbd_ops(&gsc_ps2_kbd_ops);
}
+
+#ifdef CONFIG_PSMOUSE
+ if (id==1){
+ int err;
+ unsigned int irq;
+
+ if ((err = lasi_ps2_reset(hpa,id)))
+ printk("%s: lasi_ps2_reset() failed!\n", __FUNCTION__);
+
+ irq = busdevice_alloc_irq(d);
+ if (!irq)
+ return -ENODEV;
+
+ request_irq(irq, lasikbd_interrupt, 0, name, hpa);
+
+ request_region((unsigned long)hpa, LASI_STATUS + 4, name);
+
+ misc_register(&psaux_mouse);
+ queue = (struct aux_queue *) kmalloc(sizeof(*queue), GFP_KERNEL);
+ memset(queue, 0, sizeof(*queue));
+ queue->head = queue->tail = 0;
+ init_waitqueue_head(&queue->proc_list);
+
+ aux_write_ack(AUX_ENABLE_DEV);
+
+ }
+#endif
+
return 0;
}
diff -Nru linux.old/drivers/gsc/lasi.c linux.new/drivers/gsc/lasi.c
--- linux.old/drivers/gsc/lasi.c Mon Jun 11 21:03:40 2001
+++ linux.new/drivers/gsc/lasi.c Mon Jun 11 21:08:32 2001
@@ -48,7 +48,8 @@
case 0x5000: irq = 26; break; /* RS232 */
case 0x6000: irq = 22; break; /* SCSI */
case 0x7000: irq = 23; break; /* LAN */
- case 0x8000: irq = 5; break; /* PS/2 Keyboard and Mouse */
+ case 0x8000: irq = 5; break; /* PS/2 Keyboard */
+ case 0x8100: irq = 5; break; /* PS/2 Mouse */
case 0xA000: irq = 11; break; /* Floppy Disk Controller */
default: irq = -1; break; /* unknown */
}
--------------AA99F5639BE1355209CBE326
Content-Type: text/plain; charset=us-ascii;
name="conf"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="conf"
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_PARISC=y
# CONFIG_UID16 is not set
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor type
#
# CONFIG_PA7100 is not set
# CONFIG_PA7200 is not set
CONFIG_PA7100LC=y
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
#
# General options
#
# CONFIG_SMP is not set
# CONFIG_KWDB is not set
CONFIG_GSC=y
CONFIG_IOMMU_CCIO=y
CONFIG_GSC_LASI=y
CONFIG_GSC_WAX=y
CONFIG_PCI=y
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_WAX_EISA=y
# CONFIG_SUPERIO is not set
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
CONFIG_PCI_NAMES=y
CONFIG_CHASSIS_LCD_LED=y
#
# General setup
#
# CONFIG_HOTPLUG is not set
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_SOM=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_BLK_DEV_LVM is not set
# CONFIG_LVM_PROC_FS is not set
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_SCSI_LASI=y
CONFIG_SCSI_ZALON=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_LASI_82596=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
CONFIG_TULIP=y
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_EEPRO100_PM is not set
# CONFIG_LNE390 is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139TOO is not set
# CONFIG_RTL8129 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_HAMACHI is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Input core support
#
# CONFIG_INPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_GSC_PS2=y
# CONFIG_HIL is not set
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
CONFIG_SERIAL_GSC=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
# CONFIG_JOYSTICK is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_GENRTC=y
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_STI=y
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB2=y
CONFIG_FBCON_CFB4=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_STI=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_STI_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FBCON=y
CONFIG_FBCON_FONT=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_SUN12x22=y
#
# Sound
#
CONFIG_SOUND=y
CONFIG_SOUND_HARMONY=y
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
#
# Kernel hacking
#
CONFIG_MAGIC_SYSRQ=y
--------------AA99F5639BE1355209CBE326--