[parisc-linux] J2240 / NIC
Craig D. Lansing
lansing@beldar.com
Sat, 29 Dec 2001 10:22:48 -0500
This is a multi-part message in MIME format.
------=_NextPart_000_00F3_01C19052.C3CE9BE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I just got around to bringing in the J2240 from the garage to connect it =
to the LAN. Unfortunately, the upgrade to 0.9.3 via iso image seems to =
have rendered the NIC unusable (or did I render the NIC unusable when =
moving the box w/o help?). Below is the output from boot:
Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) =
block.
tulip0: ***WARNING***: No MII transceiver found!
eth0: Digital DS21143 Tulip rev 33 at 0xfe00, 00:60:B0:B2:FC:F5, IRQ 99.
tulip1: no phy info, aborting mtable build
tulip1: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21143 Tulip rev 48 at 0x1ff00, 00:60:B0:A4:F3:F1, IRQ =
160.
SCSI subsystem driver Revision: 1.00
------=_NextPart_000_00F3_01C19052.C3CE9BE0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2614.3500" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I just got around to bringing in the =
J2240 from the=20
garage to connect it to the LAN. Unfortunately, the upgrade to =
0.9.3 via=20
iso image seems to have rendered the NIC unusable (or did I render the =
NIC=20
unusable when moving the box w/o help?). Below is the output from=20
boot:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3Dr_ansi size=3D2>
<P>Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)</P>
<P>tulip0: EEPROM default media type Autosense.</P>
<P>tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3)=20
block.</P>
<P>tulip0: ***WARNING***: No MII transceiver found!</P>
<P>eth0: Digital DS21143 Tulip rev 33 at 0xfe00, 00:60:B0:B2:FC:F5, IRQ =
99.</P>
<P>tulip1: no phy info, aborting mtable build</P>
<P>tulip1: MII transceiver #1 config 1000 status 7809 advertising =
01e1.</P>
<P>eth1: Digital DS21143 Tulip rev 48 at 0x1ff00, 00:60:B0:A4:F3:F1, IRQ =
160.</P>
<P>SCSI subsystem driver Revision: 1.00</P></FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV></BODY></HTML>
------=_NextPart_000_00F3_01C19052.C3CE9BE0--