[parisc-linux] Install on a D370!
Herb Radford
herbr@magma.ca
Wed, 12 Dec 2001 12:01:45 -0500
OK, I have had success with the C110, C200 and a B180 system.
Now I'm trying a D370. No go. I tried with the 0.9.2 Cd just to see if it
was alive or had basic problems. Got as far as the famous (for me anyway)
"Branching to kernel entry point 0x00100000." and that's all folks! I tried
both serial ports on the machine to no avail.
Yesterday I downloaded the 0.9.3-rc6.iso (it has the same md5sum as the
official version so I assume congruency) and have had exactly the same results!
There is a FWSCSI card in the box with 6 drives attached and another card,
a "Remote Management/Access Port" card in HSC 0 Slot 0.
I've seen a couple of messages about D350's which say all this stuff worked!
Does anyone have any suggestions?
Regards, Herb
And here's the log file:
Firmware Version 38.40
Duplex Console IO Dependent Code (IODC) revision 4
------------------------------------------------------------------------------
(c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State Coprocessor State Cache Size
--------- -------- --------------------- ----------------- ----------
0 160 MHz Active Functional 512 KB
Central Bus Speed (in MHz) : 120
Model: D370/1
Available memory (bytes) : 536870912
Good memory required (bytes): 43753472
Primary boot path: 8/16/5.4 (dec)
Alternate boot path: 8/16/5.0 (dec)
Console path: 8/20/1.0 (dec)
Keyboard path: 8/16/7.0 (dec)
------- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command > sea iopl
Searching for device(s) with bootable media...
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path Number Device Path (dec) Device Type and Utilities
----------- ----------------- -------------------------
P0 8/16/5.2 Random access media
IPL
P1 8/16/6.0 LAN Module
Main Menu: Enter command > sea
Searching for potential boot device(s)...
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path Number Device Path (dec) Device Type
----------- ----------------- -----------
P0 8/4.11 Random access media
P1 8/4.10 Random access media
P2 8/4.9 Random access media
P3 8/4.8 Random access media
P4 8/4.4 Random access media
P5 8/16/5.2 Random access media
P6 8/16/6.0 LAN Module
Main Menu: Enter command > sea ipl
Searching for device(s) with bootable media...
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path Number Device Path (dec) Device Type and Utilities
----------- ----------------- -------------------------
P0 8/16/5.2 Random access media
IPL
P1 8/16/6.0 LAN Module
Main Menu: Enter command > bo p0
Interact with IPL (Y, N, or Cancel)?> n
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl 0.96 root@palinux Fri Nov 2 16:31:18 MST 2001
Boot image contains:
0/vmlinux32 3122078 bytes @ 0x4cf000
0/vmlinux64 3990942 bytes @ 0x7c9800
0/ramdisk 1946807 bytes @ 0xb98000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: 'root=/dev/ram console=ttyS0 TERM=vt102'
Selected kernel: /vmlinux from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing...
This box can boot either 32 or 64-bit kernels...
Both kernels available, choosing 32-bit kernel
ELF32 executable
Entry 00100000 first 00100000 n 6
Segment 0 load 00100000 size 1618208 mediaptr 0x1000
Segment 1 load 0028c000 size 287728 mediaptr 0x18d000
Segment 2 load 002d4000 size 379072 mediaptr 0x1d4000
Segment 3 load 00334000 size 8192 mediaptr 0x231000
Segment 4 load 00338000 size 32768 mediaptr 0x233000
Segment 5 load 003750e8 size 83184 mediaptr 0x23b0e8
Loading ramdisk 1946807 bytes @ 1fe14000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Firmware Version 38.40
Duplex Console IO Dependent Code (IODC) revision 4
------------------------------------------------------------------------------
(c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State Coprocessor State Cache Size
--------- -------- --------------------- ----------------- ----------
0 160 MHz Active Functional 512 KB
Central Bus Speed (in MHz) : 120
Model: D370/1
Available memory (bytes) : 536870912
Good memory required (bytes): 43753472
Primary boot path: 8/16/5.4 (dec)
Alternate boot path: 8/16/5.0 (dec)
Console path: 8/20/1.0 (dec)
Keyboard path: 8/16/7.0 (dec)
------- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command > pa
Primary boot path: 8/16/5.4 (dec)
08/10/05.4 (hex)
Alternate boot path: 8/16/5.0 (dec)
08/10/05.0 (hex)
Console path: 8/20/1.0 (dec)
08/14/01.0 (hex)
Keyboard path: 8/16/7.0 (dec)
08/10/07.0 (hex)
Main Menu: Enter command > di
------- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command > ser
------- Service Menu ----------------------------------------------------------
Command Description
------- -----------
ChassisCodes [<proc>] Display chassis codes
CLEARPIM Clear (zero) the contents of PIM
EepromRead [<addr>] [<len>] Read EEPROM locations
LCD [ON|OFF] Configure the front panel display
MemRead <addr> [<len>] Read memory locations
PDT [CLEAR] Display or clear
the Page Deallocation Table
PIM [<proc> [HPMC|LPMC|TOC]] Display PIM information
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
MAin Return to Main menu
-------
Service Menu: Enter command > pim
PROCESSOR PIM INFORMATION
----------------- Processor 0 HPMC Information ------------------
No valid timestamp
HPMC Chassis Codes = No chassis codes logged
General Registers 0 - 31
00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
08-11 0000000000000000 0000000000000000 0000000000000000 0000000000000000
12-15 0000000000000000 0000000000000000 0000000000000000 0000000000000000
16-19 0000000000000000 0000000000000000 0000000000000000 0000000000000000
20-23 0000000000000000 0000000000000000 0000000000000000 0000000000000000
24-27 0000000000000000 0000000000000000 0000000000000000 0000000000000000
28-31 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<Press any key to continue (q to quit)>
Control Registers 0 - 31
00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
08-11 0000000000000000 0000000000000000 0000000000000000 0000000000000000
12-15 0000000000000000 0000000000000000 0000000000000000 0000000000000000
16-19 0000000000000000 0000000000000000 0000000000000000 0000000000000000
20-23 0000000000000000 0000000000000000 0000000000000000 0000000000000000
24-27 0000000000000000 0000000000000000 0000000000000000 0000000000000000
28-31 0000000000000000 0000000000000000 0000000000000000 0000000000000000
Space Registers 0 - 7
00-03 00000000 00000000 00000000 00000000
04-07 00000000 00000000 00000000 00000000
<Press any key to continue (q to quit)>
IIA Space = 0x0000000000000000
IIA Offset = 0x0000000000000000
Check Type = 0x00000000
CPU State = 0x00000000
Cache Check = 0x00000000
TLB Check = 0x00000000
Bus Check = 0x00000000
Assists Check = 0x00000000
Assist State = 0x00000000
Path Info = 0x00000000
System Responder Address = 0x0000000000000000
System Requestor Address = 0x0000000000000000
Check Summary = 0x0000000000000000
Available Memory = 0x0000000000000000
CPU Diagnose Register 2 = 0x0000000000000000
CPU Status Register 0 = 0x0000000000000000
CPU Status Register 1 = 0x0000000000000000
SADD LOG = 0x0000000000000000
Read Short LOG = 0x0000000000000000
<Press any key to continue (q to quit)>
----------------- Processor 0 LPMC Information ------------------
Check Type = 0x00000000
IC Parity Info = 0x00000000
Cache Check = 0x00000000
TLB Check = 0x00000000
Bus Check = 0x00000000
Assists Check = 0x00000000
Assist State = 0x00000000
Path Info = 0x00000000
System Responder Address = 0x0000000000000000
System Requestor Address = 0x0000000000000000
----------------- Processor 0 TOC Information -------------------
General Registers 0 - 31
00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
08-11 0000000000000000 0000000000000000 0000000000000000 0000000000000000
12-15 0000000000000000 0000000000000000 0000000000000000 0000000000000000
16-19 0000000000000000 0000000000000000 0000000000000000 0000000000000000
20-23 0000000000000000 0000000000000000 0000000000000000 0000000000000000
24-27 0000000000000000 0000000000000000 0000000000000000 0000000000000000
28-31 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<Press any key to continue (q to quit)>
Control Registers 0 - 31
00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
08-11 0000000000000000 0000000000000000 0000000000000000 0000000000000000
12-15 0000000000000000 0000000000000000 0000000000000000 0000000000000000
16-19 0000000000000000 0000000000000000 0000000000000000 0000000000000000
20-23 0000000000000000 0000000000000000 0000000000000000 0000000000000000
24-27 0000000000000000 0000000000000000 0000000000000000 0000000000000000
28-31 0000000000000000 0000000000000000 0000000000000000 0000000000000000
Space Registers 0 - 7
00-03 00000000 00000000 00000000 00000000
04-07 00000000 00000000 00000000 00000000
IIA Space = 0x0000000000000000
IIA Offset = 0x0000000000000000
CPU State = 0x00000000
<Press any key to continue (q to quit)>
Memory Error Log Information:
No valid timestamp
No memory errors logged
I/O Module Error Log Information:
No valid timestamp
No I/O module errors logged
<Press any key to continue (q to quit)>
IO Bus Converter Log
--------------------
IOA0 HPA = 0x00000000
IOA0 UBC_IO_CONTROL = 0x00000000
GSC1 HPA = 0x00000000
IOA0 IO_IO_LO = 0x00000000
IOA0 IO_IO_HI = 0x00000000
IOA0 IO_IO_LO_HV = 0x00000000
IOA0 IO_IO_HI_HV = 0x00000000
IOA1 HPA = 0x00000000
IOA1 UBC_IO_CONTROL = 0x00000000
GSC2 HPA = 0x00000000
IOA1 IO_IO_LO = 0x00000000
IOA1 IO_IO_HI = 0x00000000
IOA1 IO_IO_LO_HV = 0x00000000
IOA1 IO_IO_HI_HV = 0x00000000
NIO bus converter register data is not available.
Service Menu: Enter command > di
------- Service Menu ----------------------------------------------------------
Command Description
------- -----------
ChassisCodes [<proc>] Display chassis codes
CLEARPIM Clear (zero) the contents of PIM
EepromRead [<addr>] [<len>] Read EEPROM locations
LCD [ON|OFF] Configure the front panel display
MemRead <addr> [<len>] Read memory locations
PDT [CLEAR] Display or clear
the Page Deallocation Table
PIM [<proc> [HPMC|LPMC|TOC]] Display PIM information
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
MAin Return to Main menu
-------
Service Menu: Enter command > ma
------- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command > co
------- Configuration Menu ----------------------------------------------------
Command Description
------- -----------
AUto [BOot|SEArch] [ON|OFF] Display or set specified auto flag
BootID [<proc>] [<boot ID>] Display or modify processor boot ID
BootINfo Display boot-related information
BootTimer [0 - 200] Display or set boot delay time
CPUconfig [<proc>] [ON|OFF] Config/deconfig processor
DEfault Set the system to predefined values
FastBoot [ON|OFF] Display or set boot tests execution
LanConfig [ENABLE|DISABLE] Enable or Disable the built-in LAN
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
TIme [c:y:m:d:h:m:[s]] Read or set the real time clock in GMT
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
MAin Return to Main menu
-------
Configuration Menu: Enter command > bin
BOOT INFORMATION
Processor Boot ID
--------- -------
0 2
Autoboot: OFF
Autosearch: OFF
Fastboot: OFF
Primary boot path: 8/16/5.4 (dec)
08/10/05.4 (hex)
Alternate boot path: 8/16/5.0 (dec)
08/10/05.0 (hex)
Console path: 8/20/1.0 (dec)
08/14/01.0 (hex)
Keyboard path: 8/16/7.0 (dec)
08/10/07.0 (hex)
LAN Station Address: 080009-d20c1e
Wed Dec 12 16:08:40 GMT 2001 (20:01:12:12:16:08:40)
Configuration Menu: Enter command >
Configuration Menu: Enter command > di
------- Configuration Menu ----------------------------------------------------
Command Description
------- -----------
AUto [BOot|SEArch] [ON|OFF] Display or set specified auto flag
BootID [<proc>] [<boot ID>] Display or modify processor boot ID
BootINfo Display boot-related information
BootTimer [0 - 200] Display or set boot delay time
CPUconfig [<proc>] [ON|OFF] Config/deconfig processor
DEfault Set the system to predefined values
FastBoot [ON|OFF] Display or set boot tests execution
LanConfig [ENABLE|DISABLE] Enable or Disable the built-in LAN
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
TIme [c:y:m:d:h:m:[s]] Read or set the real time clock in GMT
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
MAin Return to Main menu
-------
Configuration Menu: Enter command > ma
------- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command > in all
PROCESSOR INFORMATION
HVERSION SVERSION CVERSION Processor
Processor Speed Model Model/Op (Revision) State
--------- -------- -------- -------- ---------- -------------
0 160 MHz 0x5a20 0x0481 769 Active
Central Bus Speed (in MHz) : 120
HSC Bus Speed (in MHz) : 39
Software ID (dec) : 2014794797
Software ID (hex) : 0x7817542d
Software Capability : 0xf0
Model: D370/1
<Press any key to continue (q to quit)>
COPROCESSOR INFORMATION
Coprocessor Coprocessor Coprocessor
Processor Model Revision State
----------- ----------- ----------- -----------------
0 0x0000000e 0 Functional
CACHE INFORMATION
Processor Instruction Cache Size Data Cache Size
----------- ----------------------- ---------------
0 512 KB 512 KB
<Press any key to continue (q to quit)>
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot SIMM Pair Size Status
---- -------------- ------
0a/b 256MB Configured
1a/b 256MB Configured
---------
TOTAL 512MB
<Press any key to continue (q to quit)>
DETAILED MEMORY CONFIGURATION TABLE
SPA GROUP SMC SMC Status Bank Bank Status Size Slot
--- ----- --- ---------- ---- ----------- ---- ----
0x00000000 0 0 Configured 3 Configured 128MB 1a/b
1 Configured 0 Configured 128MB 1a/b
2 Configured 1 Configured 128MB 0a/b
2 Configured 2 Configured 128MB 0a/b
Group 0 interleaved 4 ways over 4 banks
<Press any key to continue (q to quit)>
Active, installed memory (bytes) : 536870912 of DRAM
Deallocated pages (bytes) - 0
-----------
Available memory (bytes) : 536870912
Good memory required by OS (bytes): 43753472
Memory
HVERSION SVERSION
-------- ----------
0x0760 0x00000900
<Press any key to continue (q to quit)>
I/O MODULE INFORMATION
IODC IODC
Path (dec) Type Bus Slot Mod HVERSION SVERSION Vers Dep
---- ---- --- ---- --- -------- ---------- ------ ------
8 I/O Adapter 0 2 0 0x580f 0x10000b50 0x00 0x00
8/0 Bus Converter 1 0 0 0x5000 0x00000c00 0x00 0x00
8/0/0 A Direct I/O 5 0 0 0x0100 0x00000d00 0x04 0x00
8/4 A DMA I/O 1 1 0 0x0131 0x00008980 0x98 0x00
8/16 Bus Adapter 1 4 0 0x02f0 0x00008100 0x00 0x00
8/16/5 Built-in SE SCSI 16 1 1 0x02f0 0x00008280 0x01 0x00
8/16/6 Built-in LAN 16 1 2 0x02f0 0x00008a00 0x02 0x00
8/16/0 Built-in Parallel 16 0 0 0x02f0 0x00007400 0x00 0x00
8/16/7 Built-in Keyboard 16 1 3 0x02f0 0x00008400 0x00 0x00
8/16/8 Built-in Mouse 16 2 0 0x02f0 0x00008400 0x00 0x00
8/20 Bus Adapter 1 5 0 0x0310 0x00008e00 0x00 0x00
8/20/5 Bus Adapter 20 1 1 0x0310 0x00009000 0x00 0x00
8/20/2 RS232 Port 20 0 2 0x0310 0x00008c00 0x00 0x00
10 I/O Adapter 0 2 2 0x580f 0x10000b50 0x00 0x00
<Press any key to continue (q to quit)>
Hot Swap module is present.
EISA Cards
Path Type EISA ID
---- ---- -------
8/20/5/1 EISA slot is empty
8/20/5/2 EISA slot is empty
8/20/5/3 EISA slot is empty
8/20/5/4 EISA slot is empty
8/20/5/5 EISA slot is empty
8/20/5/6 EISA slot is empty
8/20/5/7 EISA slot is empty
8/20/5/8 EISA slot is empty
<Press any key to continue (q to quit)>
BOOT INFORMATION
Processor Boot ID
--------- -------
0 2
Autoboot: OFF
Autosearch: OFF
Fastboot: OFF
Primary boot path: 8/16/5.4 (dec)
08/10/05.4 (hex)
Alternate boot path: 8/16/5.0 (dec)
08/10/05.0 (hex)
Console path: 8/20/1.0 (dec)
08/14/01.0 (hex)
Keyboard path: 8/16/7.0 (dec)
08/10/07.0 (hex)
LAN Station Address: 080009-d20c1e
Wed Dec 12 16:10:43 GMT 2001 (20:01:12:12:16:10:43)
<Press any key to continue (q to quit)>
FIRMWARE INFORMATION
Firmware Version: 38.40
CHIP REVISIONS
Module Revision
------ --------
System Board 0
Processor Board 0
PA 8000-8000 CPU 3.1
Firmware 24
Master Memory Controller 9
I/O Bus Adapter 0 15
Fast/Wide SCSI Board 1
Multifunction I/O Controller 0
EISA Interface 0
I/O Bus Adapter 1 15
<Press any key to continue (q to quit)>
WARNINGS
No warnings to report.
Main Menu: Enter command > sea ipl
Searching for device(s) with bootable media...
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path Number Device Path (dec) Device Type and Utilities
----------- ----------------- -------------------------
P0 8/16/5.2 Random access media
IPL
P1 8/16/6.0 LAN Module
Main Menu: Enter command > bo p0
Interact with IPL (Y, N, or Cancel)?> y
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl 0.96 root@palinux Fri Nov 2 16:31:18 MST 2001
Boot image contains:
0/vmlinux32 3122078 bytes @ 0x4cf000
0/vmlinux64 3990942 bytes @ 0x7c9800
0/ramdisk 1946807 bytes @ 0xb98000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Current command line:
0/vmlinux root=/dev/ram initrd=0/ramdisk console=ttyS0 TERM=vt102
0: 0/vmlinux
1: root=/dev/ram
2: initrd=0/ramdisk
3: console=ttyS0
4: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? 0 b
Command line for kernel: 'root=/dev/ram console=ttyS0 TERM=vt102'
Selected kernel: /vmlinux from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing...
This box can boot either 32 or 64-bit kernels...
Both kernels available, choosing 32-bit kernel
ELF32 executable
Entry 00100000 first 00100000 n 6
Segment 0 load 00100000 size 1618208 mediaptr 0x1000
Segment 1 load 0028c000 size 287728 mediaptr 0x18d000
Segment 2 load 002d4000 size 379072 mediaptr 0x1d4000
Segment 3 load 00334000 size 8192 mediaptr 0x231000
Segment 4 load 00338000 size 32768 mediaptr 0x233000
Segment 5 load 003750e8 size 83184 mediaptr 0x23b0e8
Loading ramdisk 1946807 bytes @ 1fe14000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
[1;24r