[parisc-linux] C180 netbooting

nick@snowman.net nick@snowman.net
Tue, 28 Aug 2001 23:08:49 -0400 (EDT)


I have 128meg of ram and am useing the current CVS source compiled
today.  Should I try another kernel?  I have to boot custom kernels as one
of the SCSI drivers hangs the system.
	Nick

On Tue, 28 Aug 2001, Ryan Bradetich wrote:

> Arg.... I recongnize this message :(
> 
> Nick,
> 
> Can you tell me which kernel you are using, and how much
> RAM you have in the C180?  This message means that the ccio
> driver can not find any available resources in the IO page
> directory to allocate for the DMA trasaction.
> 
> Thanks,
> 
> - Ryan
> 
> On Tue, Aug 28, 2001 at 06:12:45PM -0400, nick@snowman.net wrote:
> > ok, what I've finally been able to do is boot to an nfsroot, partition sda
> > and sdb, then when I try to mke2fs any partition on either drive I get
> > errors along the lines of
> > init-2.04# SCSI device sdb: 4194685 512-byte hdwr sectors (2148 MB)
> >  sdb: sdb1 sdb2
> > SCSI device sdb: 4194685 512-byte hdwr sectors (2148 MB)
> >  sdb: sdb1 sdb2
> > Kernel panic: ccio-dma.c: ccio_alloc_range() I/O MMU is out of mapping
> > resources.
> > 
> > Kernel panic: ccio-dma.c: ccio_alloc_range() I/O MMU is out of mapping
> > resources.
> > 
> > In interrupt handler - not syncing
> > Kernel panic: ccio-dma.c: ccio_alloc_range() I/O MMU is out of mapping
> > resources.
> > 
> > In interrupt handler - not syncing
> > Kernel panic: ccio-dma.c: ccio_alloc_range() I/O MMU is out of mapping
> > resources.
> > 
> > In interrupt handler - not syncing
> > SysRq: Boot Sync Unmount showPc showTasks showMem loglevel0-8 tErm kIll
> > killalL
> > SysRq: Resetting
> > 
> > Is that usefull at all, and if not what would be usefull?
> > 	Thanks
> > 		Nick
> 
> 
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
>