[parisc-linux] RE: The new FS of ESIEE Team is ready
=?iso-8859-1?Q?SOETE_Jo=EBl?=
JSO@EUROPAY.COM
Fri, 6 Apr 2001 09:04:45 +0200
Hi Ryan,
Thanks a lot but sorry I am sure it need more because it does not work with
STI on my B180 (anyway it is
operational as I can log on serial console). (And with exactly the same fs
[the
http://puffin.external.hp.com/pub/parisc/binaries/debian/basetars/baseplus-2
0010404.tar.gz] with the kernel
http://mkhppa1.esiee.fr/archive/vmlinux.gz (dated 08-Mar-2001) it works
fine???)
Here is the config file I used for my last test:
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_PARISC=y
# CONFIG_UID16 is not set
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor type
#
CONFIG_PA7100=y
CONFIG_PA11=y
#
# General options
#
CONFIG_GSC=y
CONFIG_IOMMU_CCIO=y
CONFIG_GSC_LASI=y
CONFIG_GSC_WAX=y
CONFIG_PCI=y
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_WAX_EISA=y
CONFIG_SUPERIO=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
CONFIG_PCI_NAMES=y
CONFIG_CHASSIS_LCD_LED=y
#
# General setup
#
CONFIG_HOTPLUG=y
CONFIG_NET=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
#
# Parallel port support
#
CONFIG_PARPORT=y
#
# Block devices
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
#
# Networking options
#
CONFIG_INET=y
CONFIG_IP_PNP=y
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_SG=y
#
# SCSI low-level drivers
#
CONFIG_SCSI_LASI=y
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
#
# PCMCIA SCSI adapter support
#
# CONFIG_SCSI_PCMCIA is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_LASI_82596=y
CONFIG_NET_PCI=y
CONFIG_TULIP=y
#
# Ethernet (1000 Mbit)
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Input core support
#
# CONFIG_INPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_GSC_PS2=y
# CONFIG_HIL is not set
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
CONFIG_SERIAL_GSC=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_JOYSTICK is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_GENRTC=y
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_PCMCIA_SERIAL=y
#
# PCMCIA character device support
#
# CONFIG_PCMCIA_SERIAL_CS is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
...
# CONFIG_JFFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=y
...
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
...
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
...
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
...
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_STI=y
...
CONFIG_FBCON_CFB2=y
CONFIG_FBCON_CFB4=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_STI=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_STI_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FBCON=y
CONFIG_FBCON_FONT=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_SUN12x22=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# Kernel hacking
#
CONFIG_MAGIC_SYSRQ=y
Is it helpfull.
Thanks anyway for advise,
Joel
> -----Original Message-----
> From: Ryan Bradetich [mailto:rbrad@beavis.ybsoft.com]
> Sent: Friday, April 06, 2001 4:09 AM
> To: SOETE Jo?l
> Subject: Re: [parisc-linux] RE: The new FS of ESIEE Team is ready
>
>
> The magic you are looking for is:
>
> CONFIG_SERIAL_CONSOLE=n
> CONFIG_STI_CONSOLE=y
>
> I believe this should work with both enabled, but currently it
> doesn't :(
>
>
> - Ryan
>
> On Thu, Apr 05, 2001 at 07:53:07PM +0200, SOETE Jo?l wrote:
> > Hi Thomas,
> >
> > I just download the last release of linux palo (date of
> today) as well as
> > the last release of the cross-compiler.
> >
> > I try to build a new kernel with the config file standing
> on your archive.
> >
> > But if the resulting kernel is well bootable, it does not
> allow to work with
> > the sti console.
> > (against the kernel you put on your archive which works
> perfectly with the
> > sti console)
> >
> > (Be sure that there's no other difference between two test:
> I just choose
> > another kernel with iplboot.)
> >
> > What is magical option (in .config or elsewhere)?
> >
> > Thanks in advance for your help.
> > Joel
> >
> > > -----Original Message-----
> > > From: SOETE Jo?l
> > > Sent: Wednesday, March 21, 2001 3:19 PM
> > > To: 'Thomas Marteau'; parisc-linux@lists.parisc-linux.org
> > > Cc: Giacomo Mulas; SOETE Jo?l; William Carlsson
> > > Subject: RE: The new FS of ESIEE Team is ready
> > >
> > >
> > > Hello Thomas,
> > >
> > > I just finished to install and reboot with your
> > > fs_hd_20010320 on my B180.
> > >
> > > And I am very happy to see my favorite penguin appearing for
> > > the first time on the STI console works. Nice, great,
> marvelous, ...
> > >
> > > Also I would like to ask you additional favors: it would be
> > > nice to put on your download site the .config file with the
> > > corresponding cvs date of the kernel (the release of your
> > > cross-compiler could also be helpful for me) so that I can
> > > have a good base for future rebuild or test.
> > >
> > > Thanks again for your fs and thanks in advance for
> additional help,
> > > Joel
> > >
> > > > -----Original Message-----
> > > > From: Thomas Marteau [mailto:marteaut@esiee.fr]
> > > > Sent: Tuesday, March 20, 2001 8:08 PM
> > > > To: parisc-linux@lists.parisc-linux.org
> > > > Cc: Giacomo Mulas; SOETE Joel; William Carlsson
> > > > Subject: The new FS of ESIEE Team is ready
> > > >
> > > >
> > > > Hi all,
> > > >
> > > > The new FS is ready (~61MB). No "more" bugged with the
> > > > good TERM parameter and
> > > > no password :)
> > > > It is a specially designed for 712 owners but it is a sane
> > > > fs, we hope.
> > > >
> > > > Please, go to our DL page:
> http://mkhppa1.esiee.fr/en/download.html
> > > >
> > > > Good luck, Thomas
> > > > ESIEE Team
> > > >
> > >
> >
> >
> >
> **********************************************************************
> > This e-mail and any attachments to it may contain
> confidential information which is strictly intended for the
> use of the authorised recipient. If you have received this
> e-mail in error, please delete it and notify the sender by
> replying to this e-mail.
> > Thank you for your co-operation.
> >
> **********************************************************************
> >
> >
> > _______________________________________________
> > parisc-linux mailing list
> > parisc-linux@lists.parisc-linux.org
> > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
> >
>
**********************************************************************
This e-mail and any attachments to it may contain confidential information which is strictly intended for the use of the authorised recipient. If you have received this e-mail in error, please delete it and notify the sender by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************