This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C04F53.576F0F70
Content-Type: text/plain;
charset="iso-8859-1"
Greetings,
I have downloaded the .5 Beta CDROM image, burned it and get a "fault in
kernel" after the "Serial driver ... enabled" message when booting on my
715/50. This happens with either graphics or serial console configured in
NVRAM.
Has anyone else seen this error?
----------------begin console output
(c) Copyright Hewlett-Packard Company, 1991, 1992
Portions of this code are (c) Copyright Samsung Electronics Co., Ltd, 91, 92
PDC ROM rev. 1.2
IODC ROM rev. 1.1
64 MB of memory have been configured.
Selecting a system to boot.
To stop selection process, press and hold the ESCAPE key.....
Booting from: scsi.6.0 TOSHIBA CD-ROM XM-3501TA
Soft booted.
palo ipl bame@noam Tue Oct 31 14:18:02 MST 2000
0/vmlinux 2140145 bytes @ 0x6f9800
0/palo-cmdline '0/vmlinux ROOT=/ TERM=LINUX root=/dev/scd0'
Kernel: partition 0 file /vmlinux
ELF32 executable
Entry 00100150 first 00100000 n 4
Segment 0 load 00100000 size 1460344 mediaptr 0x1000
Segment 1 load 00266000 size 179048 mediaptr 0x166000
Segment 2 load 00294000 size 109876 mediaptr 0x192000
Segment 3 load 002b0000 size 8192 mediaptr 0x1ad000
branching to kernel entry point 0x00100150
PDC Console Initialized
The 32-bit Kernel has started...
Enabled FP coprocessor
Free memory starts at: 0xc02da000
(0x504d6c,0x504d6c,0x0,0x0)
PALO command line: 'ROOT=/ TERM=LINUX root=/dev/scd0'
PALO initrd 0-0
model 00003100 00000481 00000000 00000000 77a94524 ffffffff 00000004
0000000a 0000000a
vers 00000009
CPUID vers 0 rev 0
Searching for devices in PDC firmware... processor hpa 0xfffbe000
an older box...
Found devices:
1. Stinger Optional Graphics (10) at 0xf4000000, versions 0x6, 0x0, 0x77,
0x0, 0x0
2. Scorpio Core BA (11) at 0xf082f000, versions 0x7, 0x0, 0x70, 0x0, 0x0
3. Scorpio Core SCSI (10) at 0xf0825000, versions 0x7, 0x0, 0x71, 0x0, 0x0
4. Scorpio Core LAN (802.3) (10) at 0xf0826000, versions 0x7, 0x0, 0x72,
0x0, 0x0
5. Scorpio Core HIL (10) at 0xf0821000, versions 0x7, 0x0, 0x73, 0x0, 0x0
6. Scorpio Core RS-232 (10) at 0xf0823000, versions 0x7, 0x0, 0x75, 0x0, 0x0
7. Scorpio Core RS-232 (10) at 0xf0822000, versions 0x7, 0x0, 0x75, 0x0, 0x0
8. Scorpio Core Centronics (10) at 0xf0824000, versions 0x7, 0x0, 0x74, 0x0,
0x0
9. Scorpio Audio (10) at 0xf1000000, versions 0x7, 0x0, 0x7b, 0x0, 0x0
10. Scorpio EISA BA (11) at 0xfc000000, versions 0x7, 0x0, 0x76, 0x0, 0x0
11. Scorpio (715/50) (0) at 0xfffbe000, versions 0x310, 0x0, 0x4, 0x0, 0x81
12. Scorpio (1) at 0xfffbf000, versions 0x17, 0x0, 0x9, 0x0, 0x0
That's a total of 12 devices.
CPU(s): 1 x PA7100 (PCX-T) at 50.000000 MHz
Linux version 2.4.0-test6 (pjlahaie@elenuial.thepuffingroup.com) (gcc
version 2.96 20000925 (experimental)) #32 Mon Nov 6 10:20:58 EST 2000
free_bootmem(0x2da800, 0x3d25800)
initrd: 00000000-00000000
pagetable_init
On node 0 totalpages: 16384
zone(0): 8192 pages.
zone(1): 8192 pages.
zone(2): 0 pages.
Kernel command line: ROOT=/ TERM=LINUX root=/dev/scd0
trap_init
Calibrating delay loop... 49.77 BogoMIPS
Memory: 61388k available
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
ASP version 1 at 0xf0800000 found.
Found i82596 at 0xf0826000, IRQ 87
early initialization of device eth0 is deferred
Found HIL at 0xf0821000, IRQ 94
HIL: no keyboard present.
Warning : device (10, 0x7, 0x0, 0x73, 0x0) NOT claimed by HIL 712, 715 or
similiar
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
Starting kswapd v1.7
pty: 256 Unix98 ptys configured
lp: driver loaded but no devices found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
sim700: Couldn't get consistent shared memory
sim700: Configuring 53c700 (SCSI-ID 7) at f0825100, IRQ 86
scsi0: Revision 0x0
Post test1, istat 05, sstat0 00, dstat 84
sim700: WARNING IRQ probe failed, (returned 0)
scsi0: WARNING: target data areas are not dma coherent!
scsi0: test 1 completed ok.
scsi0: sim700_intr_handle() called with no interrupt
scsi0 : LASI/Simple 53c7xx
scsi : 1 host.
Vendor: TOSHIBA Model: CD-ROM XM-3501TA Rev: 3054
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI cdrom total.
Uniform CD-ROM driver Revision: 3.11
82596.c: MAC of HP700 LAN blindely read from the prom!
eth0: Couldn't get consistent shared memory
eth0: 82596 at 0xf0826000, 08 00 09 42 1B 37 IRQ 87.
82596.c $Revision: 1.14 $
Serial driver version 5.01 (2000-05-29) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
Dumping Stack from c3fc4000 to c3fc4bc0:
4000 00000000 00000140 00000000 00000000 c027a46c 00000001 00000000 ffffffff
4020 00000000 00000000 00000000 00000000 00000000 00000000 ffffffff c027a384
[...]
4ba0 ffffffff bffff5ff ffffff7f c01046e0 ffffbeff f7b7eddf 5fffffdf feefffff
Data access rights fault in kernel: Code=26 regs=c3fc4980 (Addr=00000003)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001000000000000001010
r0-3 00000000 c0221800 c011e9f8 c3fce420
r4-7 c3fce200 c0244f10 00000008 f0823800
r8-11 00000003 00000007 c0191568 c02c60a4
r12-15 fffffffc c0245000 c0245000 c02d72b8
r16-19 c0245000 c0245000 c02c6028 00000000
r20-23 c3fce234 f0823807 f0823800 0000000a
r24-27 ffffffff c3fce420 c3fce200 c0266000
r28-31 ffffffff 00000240 c3fc4bc0 c012dfc0
sr0-4 00000000 00000000 00000000 00000000
sr4-8 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: c011e710 c011e714
IIR: 0f881093 ISR: 00000000 IOR: 00000003
ORIG_R28: 00000058
----------------end console output
thanks,
Robert Duncan
Nortelnetworks
------_=_NextPart_001_01C04F53.576F0F70
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
CD-ROM 715/50 boot dies after serial driver...
Greetings,
I have downloaded the .5 Beta CDROM image, burned it =
and get a "fault in kernel" after the "Serial driver ... =
enabled" message when booting on my 715/50. This happens =
with either graphics or serial console configured in NVRAM.
Has anyone else seen this error?
----------------begin console output
&nb=
sp; (c) Copyright Hewlett-Packard Company, 1991, =
1992
Portions of this code are (c) Copyright Samsung =
Electronics Co., Ltd, 91, 92
PDC ROM rev. 1.2
IODC ROM rev. 1.1
64 MB of memory have been configured.
Selecting a system to boot.
To stop selection process, press and hold the ESCAPE =
key.....
Booting from: =
scsi.6.0 TOSHIBA CD-ROM XM-3501TA
Soft booted.
palo ipl bame@noam Tue Oct 31 14:18:02 MST =
2000
0/vmlinux 2140145 bytes @ 0x6f9800
0/palo-cmdline '0/vmlinux ROOT=3D/ TERM=3DLINUX =
root=3D/dev/scd0'
Kernel: partition 0 file /vmlinux
ELF32 executable
Entry 00100150 first 00100000 n 4
Segment 0 load 00100000 size 1460344 mediaptr =
0x1000
Segment 1 load 00266000 size 179048 mediaptr =
0x166000
Segment 2 load 00294000 size 109876 mediaptr =
0x192000
Segment 3 load 002b0000 size 8192 mediaptr =
0x1ad000
branching to kernel entry point 0x00100150
PDC Console Initialized
The 32-bit Kernel has started...
Enabled FP coprocessor
Free memory starts at: 0xc02da000
(0x504d6c,0x504d6c,0x0,0x0)
PALO command line: 'ROOT=3D/ TERM=3DLINUX =
root=3D/dev/scd0'
PALO initrd 0-0
model 00003100 00000481 00000000 =
00000000 77a94524 ffffffff 00000004 0000000a 0000000a
vers 00000009
CPUID vers 0 rev 0
Searching for devices in PDC firmware... processor =
hpa 0xfffbe000
an older box...
Found devices:
1. Stinger Optional Graphics (10) at 0xf4000000, =
versions 0x6, 0x0, 0x77, 0x0, 0x0
2. Scorpio Core BA (11) at 0xf082f000, versions 0x7, =
0x0, 0x70, 0x0, 0x0
3. Scorpio Core SCSI (10) at 0xf0825000, versions =
0x7, 0x0, 0x71, 0x0, 0x0
4. Scorpio Core LAN (802.3) (10) at 0xf0826000, =
versions 0x7, 0x0, 0x72, 0x0, 0x0
5. Scorpio Core HIL (10) at 0xf0821000, versions =
0x7, 0x0, 0x73, 0x0, 0x0
6. Scorpio Core RS-232 (10) at 0xf0823000, versions =
0x7, 0x0, 0x75, 0x0, 0x0
7. Scorpio Core RS-232 (10) at 0xf0822000, versions =
0x7, 0x0, 0x75, 0x0, 0x0
8. Scorpio Core Centronics (10) at 0xf0824000, =
versions 0x7, 0x0, 0x74, 0x0, 0x0
9. Scorpio Audio (10) at 0xf1000000, versions 0x7, =
0x0, 0x7b, 0x0, 0x0
10. Scorpio EISA BA (11) at 0xfc000000, versions =
0x7, 0x0, 0x76, 0x0, 0x0
11. Scorpio (715/50) (0) at 0xfffbe000, versions =
0x310, 0x0, 0x4, 0x0, 0x81
12. Scorpio (1) at 0xfffbf000, versions 0x17, 0x0, =
0x9, 0x0, 0x0
That's a total of 12 devices.
CPU(s): 1 x PA7100 (PCX-T) at 50.000000 MHz
Linux version 2.4.0-test6 =
(pjlahaie@elenuial.thepuffingroup.com) (gcc version 2.96 20000925 =
(experimental)) #32 Mon Nov 6 10:20:58 EST 2000
free_bootmem(0x2da800, 0x3d25800)
initrd: 00000000-00000000
pagetable_init
On node 0 totalpages: 16384
zone(0): 8192 pages.
zone(1): 8192 pages.
zone(2): 0 pages.
Kernel command line: ROOT=3D/ TERM=3DLINUX =
root=3D/dev/scd0
trap_init
Calibrating delay loop... 49.77 BogoMIPS
Memory: 61388k available
Dentry-cache hash table entries: 8192 (order: 4, =
65536 bytes)
Buffer-cache hash table entries: 4096 (order: 2, =
16384 bytes)
Page-cache hash table entries: 16384 (order: 4, =
65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, =
32768 bytes)
POSIX conformance testing by UNIFIX
ASP version 1 at 0xf0800000 found.
Found i82596 at 0xf0826000, IRQ 87
early initialization of device eth0 is =
deferred
Found HIL at 0xf0821000, IRQ 94
HIL: no keyboard present.
Warning : device (10, 0x7, 0x0, 0x73, 0x0) NOT =
claimed by HIL 712, 715 or similiar
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society =
NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux =
NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, =
4Kbytes
TCP: Hash tables configured (established 4096 bind =
4096)
Starting kswapd v1.7
pty: 256 Unix98 ptys configured
lp: driver loaded but no devices found
RAMDISK driver initialized: 16 RAM disks of 4096K =
size 1024 blocksize
sim700: Couldn't get consistent shared memory
sim700: Configuring 53c700 (SCSI-ID 7) at f0825100, =
IRQ 86
scsi0: Revision 0x0
Post test1, istat 05, sstat0 00, dstat 84
sim700: WARNING IRQ probe failed, (returned =
0)
scsi0: WARNING: target data areas are not dma =
coherent!
scsi0: test 1 completed ok.
scsi0: sim700_intr_handle() called with no =
interrupt
scsi0 : LASI/Simple 53c7xx
scsi : 1 host.
Vendor: TOSHIBA Model: CD-ROM =
XM-3501TA Rev: 3054
Type: =
CD-ROM =
=
ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, =
lun 0
scsi : detected 1 SCSI cdrom total.
Uniform CD-ROM driver Revision: 3.11
82596.c: MAC of HP700 LAN blindely read from the =
prom!
eth0: Couldn't get consistent shared memory
eth0: 82596 at 0xf0826000, 08 00 09 42 1B 37 IRQ =
87.
82596.c $Revision: 1.14 $
Serial driver version 5.01 (2000-05-29) with =
MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Dumping Stack from c3fc4000 to c3fc4bc0:
4000 00000000 00000140 00000000 00000000 c027a46c =
00000001 00000000 ffffffff
4020 00000000 00000000 00000000 00000000 00000000 =
00000000 ffffffff c027a384
[...]
4ba0 ffffffff bffff5ff ffffff7f c01046e0 ffffbeff =
f7b7eddf 5fffffdf feefffff
Data access rights fault in kernel: Code=3D26 =
regs=3Dc3fc4980 (Addr=3D00000003)
=
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001000000000000001010
r0-3 00000000 c0221800 =
c011e9f8 c3fce420
r4-7 c3fce200 c0244f10 =
00000008 f0823800
r8-11 00000003 00000007 c0191568 =
c02c60a4
r12-15 fffffffc c0245000 c0245000 =
c02d72b8
r16-19 c0245000 c0245000 c02c6028 =
00000000
r20-23 c3fce234 f0823807 f0823800 =
0000000a
r24-27 ffffffff c3fce420 c3fce200 =
c0266000
r28-31 ffffffff 00000240 c3fc4bc0 =
c012dfc0
sr0-4 00000000 00000000 00000000 =
00000000
sr4-8 00000000 00000000 00000000 =
00000000
IASQ: 00000000 00000000 IAOQ: c011e710 =
c011e714
IIR: 0f881093 ISR: =
00000000 IOR: 00000003
ORIG_R28: 00000058
----------------end console output
thanks,
Robert Duncan
Nortelnetworks
------_=_NextPart_001_01C04F53.576F0F70--