[parisc-linux] HP R390 boots ok, log inside
Claudiu Carter
ccarter@linuxcare.com
Tue, 29 Aug 2000 15:10:30 -0400
This is a multi-part message in MIME format.
--------------C52EBA3FCF6E1122A4AD8B94
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Tara and i have managed to boot both an R390 and D270, here's the log
for the R390.
Claudiu Carter.
--------------C52EBA3FCF6E1122A4AD8B94
Content-Type: text/plain; charset=us-ascii;
name="R390-log"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="R390-log"
Firmware Version 38.39
Duplex Console IO Dependent Code (IODC) revision 0
------------------------------------------------------------------------------
(c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State Coprocessor State Cache Size
--------- -------- --------------------- ----------------- ----------
0 240 MHz Active Functional 2 MB
1 240 MHz Idle Functional 2 MB
Central Bus Speed (in MHz) : 120
Model: R390/2
Available memory (bytes) : 1610612736
Good memory required (bytes): 8847360
Primary boot path: 8/16/5.6 (dec)
Alternate boot path: 8/16/5.5 (dec)
Console path: 10/12.0 (dec)
Keyboard path: 8/16/7.0 (dec)
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
------- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command > Search
Searching for potential boot device(s)...
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path Number Device Path (dec) Device Type
----------- ----------------- -----------
P0 8/16/5.6 Random access media
P1 8/16/5.5 Random access media
P2 8/16/5.1 Random access media
P3 8/16/6.0 LAN Module
Main Menu: Enter command > bo P2
Interact with IPL (Y, N, or Cancel)?> N
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl bame@noam Fri Aug 4 18:36:35 MDT 2000
0/vmlinux 2349352 bytes @ 0x6f6000
0/palo-cmdline '0/vmlinux TERM=linux HOME=/ root=/dev/scd0'
Kernel: partition 0 file /vmlinux
ELF32 executable
Entry 00100000 first 00100000 n 4
Segment 0 load 00100000 size 1511580 mediaptr 0x1000
Segment 1 load 00272000 size 132368 mediaptr 0x173000
Segment 2 load 00294000 size 86880 mediaptr 0x194000
Segment 3 load 002ac000 size 8192 mediaptr 0x1aa000
branching to kernel entry point 0x00100000
pdc_cons registered !
The Kernel has started...
Free memory starts at: 0xc02dc000
PALO command line: 'TERM=linux HOME=/ root=/dev/scd0'
PALO initrd 0-0
FP CCR was 0x0, will be set to 0xc0
model 00005ba0 00000491 00000000 00000002 77f03bdf 100000f0 00000008 000000b22vers 00000501
cpuid 000001d7
CPUID vers 14 rev 23
CPU(s): 1 x PA8200 at 240.000000 MHz
Searching for devices in PDC firmware... a newer box...
Found devices:
1. UL 550 Lasi Core BA (11) at 0xffd00000, versions 0x2f, 0x0, 0x81, 0x0, 0x0
2. UL 550 Lasi Core RS-232 (10) at 0xffd05000, versions 0x2f, 0x0, 0x8c, 0x0, 003. UL 550 Core SCSI (10) at 0xffd06000, versions 0x2f, 0x0, 0x82, 0x0, 0x80
4. UL 350 Core LAN (802.3) (10) at 0xffd07000, versions 0x2f, 0x0, 0x8a, 0x0, 005. UL 550 Core Centronics (10) at 0xffd02000, versions 0x2f, 0x0, 0x74, 0x0, 0x06. UL 550 Core PC Keyboard (10) at 0xffd08000, versions 0x2f, 0x0, 0x84, 0x0, 007. UL 550 Core PC Keyboard (10) at 0xffd08100, versions 0x2f, 0x0, 0x84, 0x0, 008. UL 550 Core Wax BA (11) at 0xffe00000, versions 0x31, 0x0, 0x8e, 0x0, 0x0
9. UL 550 Wax EISA BA (11) at 0xfc000000, versions 0x31, 0x0, 0x90, 0x0, 0x0
10. UL 550 Wax Core RS-232 (10) at 0xffe02000, versions 0x31, 0x0, 0x8c, 0x0, 0011. Raven Opt. 2D Graphics (Goat) (10) at 0xf6000000, versions 0x12, 0x0, 0x77,0That's a total of 11 devices.
Linux version 2.3.99-pre8 (bame@noam) (gcc version 2.96 20000707 (experimental)0initrd: 00000000-00000000
pagetable_init
On node 0 totalpages: 32768
zone(0): 16384 pages.
zone(1): 16384 pages.
zone(2): 0 pages.
trap_init
Calibrating delay loop... 374.37 BogoMIPS
Memory: 125696k available
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
kmem_create: Poisoning requested, but con given - bdev_cache
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
kmem_create: Poisoning requested, but con given - inode_cache
POSIX conformance testing by UNIFIX
Lasi version 0 at 0xffd00000 found.
request_irq(258, c01ec76c, 0x0, lasi, c7ff9080)
Wax at 0xffe00000 found.
request_irq(263, c01ec76c, 0x0, wax, c7ff9140)
request_irq(797, c01ec994, 0x0, wax_hil_nmi, 00000000)
Wax: HIL Keyboard-NMI registered.
parport0: PC-style at 0xffd02800, irq 536 [PCSPP,TRISTATE]
request_irq(536, c01ecac8, 0x0, parport0, c7ffcc00)
Found i82596 at 0xffd07000, IRQ 535
early initialization of device eth0 is deferred
Initializing lasi keyboard port at 0xffd08000...
request_irq(517, c01ae2fc, 0x0, GSC PS/2, ffd08000)
Initializing lasi mouse port at 0xffd08100...
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
kmem_create: Poisoning requested, but con given - skbuff_head_cache
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Starting kswapd v1.6
pty: 256 Unix98 ptys configured
lp0: using parport0 (interrupt-driven).
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
sim700: Couldn't get consistent shared memory
sim700: Configuring 53c710 (SCSI-ID 7) at ffd06100, IRQ 534
scsi0: Revision 0x2
Post test1, istat 01, sstat0 00, dstat 84
sim700: WARNING IRQ probe failed, (returned 0)
scsi0: WARNING: target data areas are not dma coherent!
scsi0: test 1 completed ok.
request_irq(534, c01da868, 0x20000000, sim700, c7f8d260)
scsi0: sim700_intr_handle() called with no interrupt
scsi0 : LASI/Simple 53c700
scsi : 1 host.
Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
Vendor: SEAGATE Model: ST39173N Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 5, lun 0
Vendor: SEAGATE Model: ST39173N Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI cdrom 2 SCSI disks total.
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.08
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17773524 [8678 MB] [8.7 GB]
Partition check:
sda: unknown partition table
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17773524 [8678 MB] [8.7 GB]
sdb: unknown partition table
82596: 6 0 0 at c028cc10
82596: 6 ffd07000 217 at c7ffca00
eth0: 82596 at 0xffd07000, 08 00 09 FD 7A AB IRQ 535.
82596.c $Revision: 1.9 $
Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI end
Found serial #0 at 0xffd05000, IRQ 538
ttyS00 at iomem 0xffd05800 (irq = 538) is a 16550A
Found serial #1 at 0xffe02000, IRQ 793
ttyS01 at iomem 0xffe02800 (irq = 793) is a 16550A
pdc_cons die !!
kmem_create: Forcing size word alignment - nfs_fh
VFS: Disk change detected on device sr(11,0)
ISO 9660 Extensions: RRIP_1991A
VFS: Mounted root (iso9660 filesystem) readonly.
request_irq(538, c019e908, 0x4000000, serial, c02c976c)
execve /sbin/init c0272008 c0272030
Fri Aug 4 01:33:00 /home/bame/xc/hppa 2000
dd: /dev/zero: Bad address
0+0 records in
0+0 records out
mke2fs 1.19-WIP, 7-Jul-2000 for EXT2 FS 0.5b, 95/08/09
ext2fs_check_if_mount: No such file or directory while determining whether /dev.
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
1024 inodes, 4096 blocks
0 blocks (0.00%) reserved for the super user
First data block=1
1 block group
8192 blocks per group, 8192 fragments per group
1024 inodes per group
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
Welcome to PA/Linux release 0.1
(release 0.1 means don't expect much from it!)
In addition to the bootable image, this CD contains cross compilers,
source code, and documentation. You can initialize a bootable PA-RISC
hard disk from this CD too. Read /README to find out more.
Since progress never stops, by the time you boot this it'll be out of
date, so check out http://www.thepuffingroup.com/parisc/ for the latest.
Login as a superuser login: root password: root
or as a normal user login: demo password: demo
(none) login: root
Password:
Most of the programs included with the Debian GNU/Linux system are
freely redistributable; the exact distribution terms for each program
are described in the individual files in /usr/doc/*/copyright
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
sh: can't access tty; job control turned off
# pwd
/root
# cd /
# ls -la
total 213
dr-xr-xr-x 18 root root 4096 Aug 4 2000 .
dr-xr-xr-x 18 root root 4096 Aug 4 2000 ..
-r--r--r-- 1 root root 1962 Aug 4 2000 README
-r--r--r-- 1 root root 3678 Aug 4 2000 README.INSTALL
dr-xr-xr-x 2 root root 4096 Aug 4 00:35 bin
dr-xr-xr-x 2 root root 2048 Aug 3 19:19 boot
dr-xr-xr-x 2 root root 163840 Aug 4 2000 dev
dr-xr-xr-x 5 root root 4096 Aug 4 2000 etc
dr-xr-xr-x 2 root root 2048 Jun 15 00:10 home
dr-xr-xr-x 2 root root 2048 Aug 3 16:50 include
dr-xr-xr-x 2 root root 2048 Jun 15 00:10 lib
dr-xr-xr-x 9 root root 2048 Aug 5 2000 mirror
dr-xr-xr-x 2 root root 2048 Jun 15 00:10 mnt
dr-xr-xr-x 17 root root 0 Aug 29 2000 proc
dr-xr-xr-x 2 root root 2048 Jun 15 00:10 root
dr-xr-xr-x 2 root root 8192 Aug 3 23:04 sbin
dr-xr-xr-x 4 root root 2048 Jul 31 16:27 share
drwxrwxrwx 3 root root 1024 Aug 4 01:33 tmp
dr-xr-xr-x 15 root root 2048 Aug 3 23:04 usr
dr-xr-xr-x 10 root root 2048 Aug 4 2000 var
# cat /proc/cpuinfo
processor : 0
cpu family : PA-RISC <NULL>
cpu : PA8200
cpu MHz : 240.000000
model :
model name : UL 2w U+/240 (350/550)
hversion : 0x00005ba0
sversion : 0x00000491
I-cache : 2048 KB
D-cache : 2048 KB (WB)
ITLB entries : 120
DTLB entries : 120 - shared with ITLB
BTLB : not supported
bogomips : 374.37
# shutdown now -h
Why?
shutdown: halted by ghost:
Couldn't umount pipe: on none: No such file or directory
Unmounting any remaining filesystems...
shutdown: Cannot open /etc/mtab.
Now you can turnSystem halted.
off the power..gsc.c:gsc_mach cmd 2
.
--------------C52EBA3FCF6E1122A4AD8B94--