[parisc-linux] Boot messages from C3000 console
Paul Bame
bame@debian.fc.hp.com
Thu, 21 Oct 1999 14:57:20 -0500
This is long. Thanks to Alex Williamson for this -
The short answer is once control is apparently transferred to the
kernel, the system dies hard. Someone who can read PIM dumps
might deduce more from this log.
-Paul Bame
Information Menu: Enter command > io
I/O MODULE INFORMATION
IODC IODC
Path Decimal Type Location HVER SVER Vers Dep
- ------------ ----------- --------------------- ---------- ---- ---- ---- ----
LAN 10/0/12/0 Ethernet built-in 0060 a200 0x02 0x00
AUDIO 10/0/13/0 Audio built-in
IDE 10/0/14/0 IDE built-in 0060 a300 0x00 0x00
SUPERIO MISC 10/0/14/1 Bridge Device built-in
SERIAL_1 10/0/14/1/1 RS232 Port built-in 0060 8c00 0x01 0x00
SERIAL_2 10/0/14/1/2 RS232 Port built-in 0060 8c00 0x01 0x00
PARALLEL 10/0/14/1/3 Parallel Port built-in
USB 10/0/14/2 USB built-in 0060 a900 0x98 0x00
SCSI 10/0/15/0 SCSI built-in 0060 a300 0x00 0x00
FWSCSI 10/0/15/1 SCSI built-in 0060 a300 0x00 0x00
GRAPHICS(2) 10/6/2/0 Display slot 2 0070 8500 0x01 0x00
Information Menu: Enter command > ma
- ----- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
- -----
Main Menu: Enter command > bo lan.15.1.55.151
Interact with IPL (Y, N, Q)?> n
Booting...
Network Station Address 001083-354faa
System IP Address 15.1.52.165
Server IP Address 15.1.55.151
Boot IO Dependent Code (IODC) revision 2
HARD Booted.
- ------------------------------------------------------------------------------
PARISC/Linux Bootstrap Version 0.6 (non-interactive)
By Helge Deller & Jason Eckhardt
Built Thu Oct 21 12:03:52 MDT 1999 by bame@burmese
Reading parameters...done.
Loading PA-RISC/Linux Kernel...
No ramdisks available.
SOM-Kernel:
aux_header_location: 00000080
som : 00200080
exec_dfile: 000DD000
exec_dsize: 00084000
exec_dmem : C00A9000
exec_tfile: 00044000
exec_tsize: 00098008
exec_tmem : C0010000
Code at 0x00010000, size=0x00098008
Data at 0x000A9000, size=0x00084000
BSS at 0x0012D000.
Transferring control to kernel. (At entry point 0x00010000)
Firmware Version 1.8
Duplex Console IO Dependent Code (IODC) revision 1
- ------------------------------------------------------------------------------
(c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
- ------------------------------------------------------------------------------
Processor Speed State Coprocessor State I/D Cache
--------- -------- --------------------- ----------------- -------------
0 400 MHz Active Functional 512 kB/1 MB
Central Bus Speed: 120 MHz
Available memory: 805306368 bytes
Good memory required: 82538496 bytes
Primary boot path: FWSCSI.6.0
Alternate boot path: SCSI.6.0
Console path: GRAPHICS(2)
Keyboard path: USB
CPU 0
WARNING: Self tests have been disabled as a result of FASTBOOT
being enabled. To enable self tests, use the FASTBOOT
command in the CONFIGURATION menu and reboot the system.
WARNING: Memory has been initialized, but not tested as a result of
FASTBOOT being enabled. To test memory, use the FASTBOOT
command in the CONFIGURATION menu and reboot the system.
Processor is starting auto boot process.
To discontinue, press any key within 10 seconds.
Boot terminated.
~`x
- ----- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
- -----
Main Menu: Enter command > ser pim
PROCESSOR PIM INFORMATION
- ----------------- Processor 0 HPMC Information ------------------
Timestamp =
Thu Oct 21 20:18:08 GMT 1999 (19:99:10:21:20:18:08)
HPMC Chassis Codes = 2cbf0 2500b 2cbf5 2cbfc
General Registers 0 - 31
00-03 0000000000000000 ffffffffffffffff 00000000000100c4 0000000000504000
04-07 0000000000504010 0000000000504000 0000000000000048 00000000f0002f88
08-11 0050427700000002 000000000000004d 000000000012c320 000000000000000a
12-15 0000000000000000 00000000ffffffff 0000000000000000 00000000f0400004
16-19 000000f0f00008a4 000000f0f0000160 000000f0f0000158 fffffffffff80810
20-23 0000000003000000 0000000000001000 0000000000000000 00000000000c0000
24-27 0000000000000000 0000000000000001 00000000c0159610 ffffffffc00a8000
28-31 ffffffffffffffff 00000000000ac948 00000000000ac400 0200000000000204
<Press any key to continue (q to quit)>
Control Registers 0 - 31
00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
08-11 0000000000000000 0000000000000000 0000000000000000 000000000000003c
12-15 0000000000000000 0000000000000000 0000000000000000 0000000000000000
16-19 0000001d9f33c26d 0000000000000000 0000000000010184 000000000e601181
20-23 00000000a627ffff c0000000e0380810 0000000000000009 0000000080000000
24-27 00000000fdffffff 00000000ffffffff 0000000000000002 0000000008000009
28-31 00000000fdffffff 00000000ffffffff 00000000fdffffff 00000000fdffffff
Space Registers 0 - 7
00-03 00000000 00000000 00000000 00000000
04-07 00000000 00000000 00000000 00000000
<Press any key to continue (q to quit)>
IIA Space = 0x0000000000000000
IIA Offset = 0x0000000000010188
Check Type = 0x20000000
CPU State = 0x9e000004
Cache Check = 0x00000000
TLB Check = 0x00000000
Bus Check = 0x0030103b
Assists Check = 0x00000000
Assist State = 0x00000000
Path Info = 0x00000000
System Responder Address = 0x000000fffff80810
System Requestor Address = 0x000000fffffa0000
Floating-Point Registers 0 - 31
00-03 ffd00fbfffffffdf ffffffffffffffff ffffffffffffffff ffffffffffffffff
04-07 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
08-11 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
12-15 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
16-19 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
20-23 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
24-27 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
28-31 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
<Press any key to continue (q to quit)>
'B1000/C3000/J5000/J7000 Unarchitected (per-CPU)', revision 1, 140 bytes:
Check Summary = 0xcb81041008000000
Available Memory = 0x0000000030000000
CPU Diagnose Register 2 = 0x0200000000000204
CPU Status Register 0 = 0x2420c20000000000
CPU Status Register 1 = 0x8002000000000000
SADD LOG = 0x0000000000000000
Read Short LOG = 0xc1af00fffff80810
ERROR_STATUS = 0x0000000000100010
MEM_ADDR = 0x000001ff3fffffff
MEM_SYND = 0x0000000000000000
MEM_ADDR_CORR = 0x000001ff3fffffff
MEM_SYND_CORR = 0x0000000000000000
RUN_DATA_HIGH = 0xc1bff0fffed08040
RUN_DATA_LOW = 0xc1bff0fffed08040
RUN_CTRL = 0x0000021c00001418
RUN_ADDR = 0xc1bff0fffed08040
System Responder Path = 0x00ffffffffffffff
<Press any key to continue (q to quit)>
- ----------------- Processor 0 LPMC Information ------------------
Check Type = 0x00000000
I/D Cache Parity Info = 0x00000000
Cache Check = 0x00000000
TLB Check = 0x00000000
Bus Check = 0x00000000
Assists Check = 0x00000000
Assist State = 0x00000000
Path Info = 0x00000000
System Responder Address = 0x0000000000000000
System Requestor Address = 0x0000000000000000
- ----------------- Processor 0 TOC Information -------------------
General Registers 0 - 31
00-03 0000000000000000 000000f0f0093000 000000f0f000b658 00000000000f4240
04-07 00000020317d230d 0000000000000004 000000f0f0407aa8 0000000000000000
08-11 000000f0f0407aa8 000000000000004d 000000000012c320 000000000000000a
12-15 0000000000000000 00000000ffffffff 0000000000000000 00000000f0400004
16-19 000000f0f00008a4 000000f0f0000160 000000f0f0000158 000000f0f0077270
20-23 000000f0f05f0068 0000000000000004 0000000000000008 000000f0f003c3ac
24-27 0000000009f9c6f0 000000003d090000 0000000017d78400 000000f0f0412000
28-31 0000000017d78400 0000000000000008 000000f0f0407d68 000000f0f00772f0
<Press any key to continue (q to quit)>
Control Registers 0 - 31
00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
08-11 0000000000000000 0000000000000000 0000000000000000 0000000000000005
12-15 0000000000000000 0000000000000000 000000f0f0003800 0000000000000000
16-19 000000203b7aaa7c 00000000000000f0 000000f0f000b664 00000000020008b8
20-23 000000009237c3c1 0000000001c07d10 000000ff0809cf08 0000000080000000
24-27 00000000fdffffff 00000000ffffffff 0000000000000002 0000000008000009
28-31 00000000fdffffff 00000000ffffffff 00000000fdffffff 00000000fdffffff
Space Registers 0 - 7
00-03 00000000 00000000 00000000 00000000
04-07 00000000 00000000 00000000 00000000
IIA Space = 0x00000000000000f0
IIA Offset = 0x000000f0f000b65c
CPU State = 0x0000004d
<Press any key to continue (q to quit)>
Memory Error Log Information:
Timestamp =
Thu Oct 21 20:18:08 GMT 1999 (19:99:10:21:20:18:08)
'B1000/C3000/J5000/J7000 Memory Error Log', revision 0, 64 bytes:
No memory errors logged
I/O Module Error Log Information:
Timestamp =
Thu Oct 21 20:18:08 GMT 1999 (19:99:10:21:20:18:08)
'B1000/C3000/J5000/J7000 IO Error Log', revision 0, 228 bytes:
Rope Word1 Word2 Word3
- ------ ------------ ------------
0 0x00000000 0x0e0cc009 0x00000000fed30048
1 0x00000000 0x1e0cc009 0x00000000fed32048
2 ---------- 0x2e0cc009 ------------------
3 ---------- 0x3e0cc009 ------------------
4 0x00000000 0x4e0cc009 0x00000000fed38048
5 ---------- 0x5e0cc009 ------------------
6 0x00000000 0x6e0cc009 0x00000000fed3c048
7 ---------- 0x7e0cc009 ------------------
Main Menu: Enter command >
- --------------6D46321F53F67470D064CBF0--
------- End of Forwarded Message