b2k 64bit kernel failled to boot [Was: [parisc-linux-cvs] linux-2.6 willy]

[Joel Soete]

Hello Matthew,

Very sorry to announce that but if my b2k run well with pa4 (build Jan 4
11:32:46 CET 2005):
[...]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NS87415: IDE controller at PCI slot 0000:00:0e.0
NS87415: chipset revision 3
NS87415: 100% native mode on irq 199
    ide0: BM-DMA at 0x0900-0x0907, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x0908-0x090f, BIOS settings: hdc:DMA, hdd:DMA
hda: LTN485S, ATAPI CD/DVD-ROM drive
elevator: using anticipatory as default io scheduler
ide0 at 0xe00-0xe07,0xd02 on irq 199
hda: ATAPI 48X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.20
sym0: <895a> rev 0x1 at pci 0000:00:0f.0 irq 129
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18n
  Vendor: QUANTUM   Model: ATLAS5-9LVD       Rev: HP04
  Type:   Direct-Access                      ANSI SCSI revision: 03
sym0:5:0: tagged command queuing enabled, command queue depth 16.
 target0:0:5: Beginning Domain Validation
sym0:5: wide asynchronous.
sym0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
 target0:0:5: Ending Domain Validation
  Vendor: SEAGATE   Model: ST336704LC        Rev: HP03
  Type:   Direct-Access                      ANSI SCSI revision: 03
sym0:6:0: tagged command queuing enabled, command queue depth 16.
 target0:0:6: Beginning Domain Validation
sym0:6: wide asynchronous.
sym0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
 target0:0:6: Ending Domain Validation
sym1: <875> rev 0x26 at pci 0000:01:03.0 irq 259
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.1.18n
st: Version 20041025, fixed bufsize 32768, s/g segs 256
SCSI device sda: 17773524 512-byte hdwr sectors (9100 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 17773524 512-byte hdwr sectors (9100 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
Attached scsi disk sda at scsi0, channel 0, id 5, lun 0
SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB)
SCSI device sdb: drive cache: write through
 sdb: sdb1
Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 5, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0,  type 0
[...]

otc the namely pa5 failled to boot:
[...]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NS87415: IDE controller at PCI slot 0000:00:0e.0
NS87415: chipset revision 3
NS87415: 100% native mode on irq 199
    ide0: BM-DMA at 0x0900-0x0907, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x0908-0x090f, BIOS settings: hdc:DMA, hdd:DMA
hda: LTN485S, ATAPI CD/DVD-ROM drive
elevator: using anticipatory as default io scheduler
ide0 at 0xe00-0xe07,0xd02 on irq 199
hda: ATAPI 48X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.20
sym0: <895a> rev 0x1 at pci 0000:00:0f.0 irq 129
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18n
sym0:0:0: ABORT operation started.
sym0:0:0: ABORT operation timed-out.
sym0:0:0: DEVICE RESET operation started.
sym0:0:0: DEVICE RESET operation timed-out.
sym0:0:0: BUS RESET operation started.
sym0:0:0: BUS RESET operation timed-out.
sym0:0:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.

[...]
> 
> 
> CVSROOT:	/var/cvs
> Module name:	linux-2.6
> Changes by:	willy at cvs.parisc-linux.org	2005-01-04 09:51:55
> 
> Modified files:
> 	.              : Makefile 
> 
> Log message:
> 	2.6.10-pa5: Celebrate the death of irq_region
> 
> Patches:
> http://cvs.parisc-linux.org/linux-2.6/Makefile.diff?cvsroot=&r1=1.317&r2=1.318
> 
Any idea?

Thanks in advance for addtional help,
    Joel

---------------------------------------------------------------------------
Tiscali vous offre 3 mois d'ADSL et 3 mois de DVD gratuits...profitez-en...
http://reg.tiscali.be/adsl/default.asp?lg=FR